Lower the time we wait for interfaces to appearWaiting for interfaces is tricky. They might never appear.. for example when we have entries in `/etc/cloudstack/ips.json` that haven't been plugged yet. Waiting this long makes everything horribly slow (every vm, interface, static route, etc, etc, will hit this wait, for every device). We've seen CloudStack send an `ip_assoc.json` command for `eth1` public nic only and then the router goes crazy waiting for all other interfaces that were there before reboot and aren't there. If only the router would return to the mgt server a success of `eth1`, it would get the command for `eth2` etc etc. Obviously, a destroy works much faster because no state services, so no knowledge of previous devices so no waits :-)
After a stop/start the router has state in `/etc/cloudstack/ips.json` and every commands waits. Eventually hitting the hardcoded 120 sec timeout.
* pr/1471:
lower the time we wait for interfaces to appear
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts## Description
JIRA TICKET: https://issues.apache.org/jira/browse/CLOUDSTACK-9368
This pull request address a problem introduced in #1361 in which NFS version couldn't be changed after hosts resources were configured on startup (for hosts using `VmwareResource`), and as host parameters didn't include `nfs.version` key, it was set `null`.
## Proposed solution
In this proposed solution `nfsVersion` would be passed in `NfsTO` through `CopyCommand` to `VmwareResource`, who will check if NFS version is still configured or not. If not, it will use the one sent in the command and will set it to its storage processor and storage handler. After those setups, it will proceed executing command.
* pr/1518:
CLOUDSTACK-9368: Fix for Support configurable NFS version for Secondary Storage mounts
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Refactor system VM default network creationTwo small commits which moves the retrieval of the default network for the console proxy and the SSVM into a separate protected method. It's a small change that makes the code more readable/maintainable and also makes the class more suitable for overriding should one want to do this. It's forward-ported from our 4.2 branch.
No new tests since this should not change any functionality, and thus should be covered by the existing unit tests.
Now on the master branch (#1359 was on the wrong branch).
* pr/1360:
Refactor ssvm default network retrieval.
Refactor console proxy default network retrieval.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
add DHCP lease folders for UbuntuAdd `/var/lib/dhcp/*` to the search path for Ubuntu; tested under Ubuntu Precise, Trusty and Xenial.
* pr/1552:
add DHCP lease folders for Ubuntu
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Hyper-V communication broken by change in variable namesChange variable names back to fix communication with Hyper-V Agent:
https://issues.apache.org/jira/browse/CLOUDSTACK-9383
* pr/1556:
Removing “_” from the front of member variables in “Command” classes
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Dynamically load drivers before creating our DB connectionsSolution to the mailing thread titled "MySQL : No suitable driver found for jdbc:mysql".
It doesn't harm that we explicitely load the MySQL driver, and for those which would use a commons-dbcp version < 1.4 this would fix it as well. Since JDBC 4.0, the JDBC driver can auto-register itself, but for some weird cases (like ours), it's not working. Therefore we need to explicitly load the JDBC driver.
* pr/1553:
Dynamic loading of DB driver + support for other DB providers
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9203 Implement security group move on updateVM API call cherry-picked from a exoscale internal fix
Conflicts:
api/src/org/apache/cloudstack/api/command/user/vm/UpdateVMCmd.java
server/src/com/cloud/vm/UserVmManager.java
server/src/com/cloud/vm/UserVmManagerImpl.java
* pr/1297:
CLOUDSTACK-9203 refactorred DeployVM code to be used by UpdateVM as well
CLOUDSTACK-9203 security group update on running instance
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9380: fix NPE in listDomains API for a mistakeThe issue happens if volumeTotal is NULL in database.
This is caused by commit 0407fb334f3a79f570217f35636b47076b06d500 for CLOUDSTACK-7847.
* pr/1550:
CLOUDSTACK-9380: fix NPE in listDomains API for a mistake
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Remodeling of Nuage VSP Plugin + CLOUDSTACK-9294Hi all,
We've remodeled the Nuage VSP plugin to use the same model as VMWare is using (non-OSS). Before, we had a runtime dependency to the Nuage Client, this has been changed to a compile-time dependency instead because of multiple reasons (build management, readability, maintainability, ...)
We've adapted the code so it now uses model objects defined in the Nuage client instead of passing a list of parameters to the Nuage client. This is a lot more readable, and a lot more maintainable.
I've had a chat with @DaanHoogland about this approach, and he told me that ACS is trying to move away from the whole non-OSS approach. We're looking into the Juniper approach, we would set up a custom maven repository which would host the required dependencies for the Nuage VSP plugin.
Any remarks or suggestions are always welcome :)
* pr/1494:
Nuage VSP : Extending Marvin test coverage
Nuage VSP : Fix for NPE while cleaning up account when there are still resources belonging to that account
CLOUDSTACK-9294 : Make sure to remove VR from VSD when removing the VPC
CLOUDSTACK-9242 : Remodel Nuage VSP plugin
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Add Java Default Certificat Authorities into the keystore if using a custom cert SSL
Related to CLOUDSTACK-1475
* pr/1555:
Add Java Default Certificat Authorities into the keystore if using a custom cert SSL Related to CLOUDSTACK-1475 Fix some english message
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Convert patchviasocket to python (removes perl dependency for KVM agent)As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
Note: perl-modules requirement is missing (fixed in mentioned PR) so do not merge that onto master.
* pr/1533:
Revert "Add perl-modules as install dependency for cloudstack-agent"
patchviasocket improve error handling
Convert patchviasocket to python (removes perl dependency for KVM agent)
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9358: StringIndexOutOfBoundsException on eventsFixes JSON deserialization of `cmdInfo` (current process fails with `StringIndexOutOfBoundsException` when `cmdEventType` is the last parameter in the JSON string).
A `StringIndexOutOfBoundsException` is thrown in some cases during event publication.
Example: a stopVirtualMachine API request is executed, and fails with:
```
2016-04-15 09:24:43,080 ERROR [o.a.c.f.m.MessageDispatcher] (catalina-exec-1:ctx-840cbaa7 ctx-8daf0e9c ctx-f63af073) Unexpected exception when calling com.cloud.api.ApiServer.handleAsyncJobPublishEvent
java.lang.reflect.InvocationTargetException
at sun.reflect.GeneratedMethodAccessor307.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.apache.cloudstack.framework.messagebus.MessageDispatcher.dispatch(MessageDispatcher.java:75)
at org.apache.cloudstack.framework.messagebus.MessageDispatcher.onPublishMessage(MessageDispatcher.java:45)
at org.apache.cloudstack.framework.messagebus.MessageBusBase$SubscriptionNode.notifySubscribers(MessageBusBase.java:441)
at org.apache.cloudstack.framework.messagebus.MessageBusBase.publish(MessageBusBase.java:178)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl.publishOnEventBus(AsyncJobManagerImpl.java:1052)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl.submitAsyncJob(AsyncJobManagerImpl.java:180)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl.submitAsyncJob(AsyncJobManagerImpl.java:168)
at com.cloud.api.ApiServer.queueCommand(ApiServer.java:687)
at com.cloud.api.ApiServer.handleRequest(ApiServer.java:528)
at com.cloud.api.ApiServlet.processRequestInContext(ApiServlet.java:296)
at com.cloud.api.ApiServlet$1.run(ApiServlet.java:127)
at org.apache.cloudstack.managed.context.impl.DefaultManagedContext$1.call(DefaultManagedContext.java:56)
at org.apache.cloudstack.managed.context.impl.DefaultManagedContext.callWithContext(DefaultManagedContext.java:103)
at org.apache.cloudstack.managed.context.impl.DefaultManagedContext.runWithContext(DefaultManagedContext.java:53)
at com.cloud.api.ApiServlet.processRequest(ApiServlet.java:124)
at com.cloud.api.ApiServlet.doGet(ApiServlet.java:86)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:620)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at org.apache.tomcat.websocket.server.WsFilter.doFilter(WsFilter.java:52)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:171)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:950)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1040)
at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(AbstractProtocol.java:607)
at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.doRun(NioEndpoint.java:1720)
at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.run(NioEndpoint.java:1679)
at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: java.lang.StringIndexOutOfBoundsException: String index out of range: -468
at java.lang.String.substring(String.java:1967)
at com.cloud.api.ApiServer.handleAsyncJobPublishEvent(ApiServer.java:270)
at sun.reflect.GeneratedMethodAccessor307.invoke(Unknown Source)
... 41 more
```
The VM is not stopped, and the API returns the following error:
HTTP/1.1 530 : InvocationTargetException when invoking event handler for subject: job.eventpublish
The error comes from JSON parsing in 339355594c/server/src/com/cloud/api/ApiServer.java (L270)
The `substring()` method throws a StringIndexOutOfBoundsException when `cmdEventType` is the last field in the JSON object.
The JSON object being the JSON serialization of a `HashMap` object, the order of the fields is not guaranteed. In my tests, I observed that there is no error with Java 7, but it fails with Java 8, which has a different Hashmap implementation.
For example, with request http://127.0.0.1:8096/client/api?command=stopVirtualMachine&id=734ef752-fe99-4d46-8f31-18130496473c, cmdInfo is:
```
{"ctxUserId":"1","httpmethod":"GET","ctxStartEventId":"105","id":"734ef752-fe99-4d46-8f31-18130496473c","ctxDetails":"{\"interface com.cloud.vm.VirtualMachine\":\"734ef752-fe99-4d46-8f31-18130496473c\"}","ctxAccountId":"1","uuid":"734ef752-fe99-4d46-8f31-18130496473c","cmdEventType":"VM.STOP"}
```
and it fails.
Please note that the error is not present for all API requests, depending on the parameters fields.
* pr/1503:
CLOUDSTACK-9358: StringIndexOutOfBoundsException on events
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-8970 Centos 6.{1,2,3,4,5} guest OS mapping for vmware is not available
* pr/956:
CLOUDSTACK-8970 Centos 6.{1,2,3,4,5} guest OS mapping for vmware is not available
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Bug-ID: CLOUDSTACK-8870: Skip external device usage collection if no external devices existexternal network device usage monitor thread that runs every 5mins by default (based on global config external.network.stats.interval) and runs coalesce query to acquire a lock. When there are no external devices exist, there is no need to run usage collection.
Added test case to verify that usage collection task is not run when there are no External LB or External FW
* pr/846:
Bug-ID: CLOUDSTACK-8870: Skip external device usage collection if no external devices exist
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-6975: Prevent dnsmasq from starting on backup redundant RvRRebase of PR #1509 against the 4.7 branch as requested by @swill
One LGTM from @ustcweizhou carried from previous PR. Previous PR will be closed.
Description from PR #1509:
CLOUDSTACK-6975 refers to service monitoring bringing up dnsmasq but this is no-longer accurate, as service monitoring is not active on the post-4.6 routers. These routers still suffer an essentially identical issue, however, because "dnsmasq needs to be restarted each time configure.py is called in order to avoid lease problems." As such, dnsmasq is still running on backup RvRs, causing the issues described in CLOUDSTACK-6975.
This PR is based on a patch submitted by @ustcweizhou. The code now checks the redundant state of the router before restarting dnsmasq.
RvR networks without this patch have dnsmasq running on both master and backup routers. RvR networks with this patch have dnsmasq running on only the master router.
* pr/1514:
CLOUDSTACK-6975: Prevent dnsmasq from starting on backup redundant RvR.
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-6928: fix issue disk I/O throttling not appliedDisk IO throttling (for KVM) is not applied in the merge of 4.2.
Tests passed:
(1) start vm
(2) attach volume
(3) start vm with volume
(4) migrate vm (with volume)
* pr/1410:
CLOUDSTACK-6928: fix issue disk I/O throttling not applied
Signed-off-by: Will Stevens <williamstevens@gmail.com>
cherry-picked from a exoscale internal fix:
Implement security group move on updateVM API call
Prevent security group update while instance is running
Conflicts:
api/src/org/apache/cloudstack/api/command/user/vm/UpdateVMCmd.java
server/src/com/cloud/vm/UserVmManager.java
server/src/com/cloud/vm/UserVmManagerImpl.java
more detailed error if host file not found or cannot be opened
using mkstemp and mkdtemp for improved security
improve resource cleanup in error conditions in unit test
As requested here: https://github.com/apache/cloudstack/pull/1495
No scripts are using perl so that install requirement can be removed.
The new scripts are using standard python packages only.
Includes extensive unit test.
CLOUDSTACK-9348: NioConnection improvementsReopened PR with squashed changes for a re-review and testing after https://github.com/apache/cloudstack/pull/1493 and sub-sequent PRs got reverted
* pr/1549:
CLOUDSTACK-9348: NioConnection improvements
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9365 : updateVirtualMachine with userdata should not error when a VM is attached to multiple networks from which one or more doesn't support userdata
* pr/1523:
Marvin script for cloudstack-9365
CLOUDSTACK-9365 : updateVirtualMachine with userdata should not error when a VM is attached to multiple networks from which one or more doesn't support userdata
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9366: Capacity of one zone-wide primary storage ignoredDisable and Remove Host operation disables the primary storage capacity.
Steps to replicate:
Base Condition: There exists a host and storage pool with same id
Steps:
1. Find a host and storage pool having same id
2. Disable the host
3. CPU(1) and MEMORY(0) capacity in op_host_capacity for above host is disabled
4. STORAGE(3) capacity in op_host_capacity for storage pool with id same as above host is also disabled
RCA:
'host_id' column in 'op_host_capacity' table used for storing both storage pool id (for STORAGE capacity) and host id (MEMORY and CPU). While disabling a HOST we also disable the capacity associated with host.
Ideally while disabling capacity we should only disable MEMORY and CPU capacity, but we are not doing so.
Code Path:
ResourceManagerImpl.doDeleteHost() -> ResourceManagerImpl.resourceStateTransitTo() -> CapacityDaoImpl.updateCapacityState(null, null, null, host.getId(), capacityState.toString())
updateCapacityState is updating disabling all entries which matches the host_id. This will also disable a entry having storage pool id same as that of host id.
Changes:
introduced new capacityType parameter in updateCapacityState method and necessary changes to add capacity_type clause in sql
also fixed incorrect sql builder logic (unused code path for which it is never surfaced )
Added marvin test to check host and storagepool capacity when host is disabled
Test Result:
```
Before Fix:
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Enabled | MEMORY | 8589934592 | HOST |
| 3 | Enabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
9 rows in set (0.00 sec)
Disable Host 3 from UI.
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Disabled | MEMORY | 8589934592 | HOST |
| 3 | Disabled | CPU | 32000 | HOST |
| 3 | Disabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
After Fix:
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Enabled | MEMORY | 8589934592 | HOST |
| 3 | Enabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
3 rows in set (0.01 sec)
Disable Host 3 from UI.
mysql> select ohc.host_id, ohc.`capacity_state`, case capacity_type when 0 then 'MEMORY' when 1 then 'CPU' ELSE 'STORAGE' END as 'capacity_type' , total_capacity, case capacity_type when 0 then 'HOST' when 1 then 'HOST' ELSE 'STORAGE POOL' END as 'HOST/STORAGE POOL' from op_host_capacity ohc where host_id=3;
+---------+----------------+---------------+----------------+-------------------+
| host_id | capacity_state | capacity_type | total_capacity | HOST/STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
| 3 | Disabled | MEMORY | 8589934592 | HOST |
| 3 | Disabled | CPU | 32000 | HOST |
| 3 | Enabled | STORAGE | 2199023255552 | STORAGE POOL |
+---------+----------------+---------------+----------------+-------------------+
3 rows in set (0.00 sec)
Sudhansus-MAC:cloudstack sudhansu$ nosetests-2.7 --with-marvin --marvin-config=setup/dev/advanced.cfg test/integration/component/maint/test_capacity_host_delete.py
==== Marvin Init Started ====
=== Marvin Parse Config Successful ===
=== Marvin Setting TestData Successful===
==== Log Folder Path: /tmp//MarvinLogs//Apr_22_2016_22_42_27_X4VBWD. All logs will be available here ====
=== Marvin Init Logging Successful===
==== Marvin Init Successful ====
===final results are now copied to: /tmp//MarvinLogs/test_capacity_host_delete_9RHSNB===
Sudhansus-MAC:cloudstack sudhansu$ cat /tmp//MarvinLogs/test_capacity_host_delete_9RHSNB/results.txt
test_01_op_host_capacity_disable_host (integration.component.maint.test_capacity_host_delete.TestHosts) ... === TestName: test_01_op_host_capacity_disable_host | Status : SUCCESS ===
ok
----------------------------------------------------------------------
Ran 1 test in 0.168s
OK
```
* pr/1516:
CLOUDSTACK-9366: Capacity of one zone-wide primary storage ignored
Signed-off-by: Will Stevens <williamstevens@gmail.com>
dynamic-roles: packaging improvementsOn some MySQL server envs, this may cause a SQL statement error, though
I was unable to reproduce it. Since it's not needed, an order by 'sort_order'
is enough, we can safely remove it.
/cc @swill @anshulgangwar @DaanHoogland and others
* pr/1551:
migrate-dynamicroles: use mysql.connector due to #1054
packaging: don't bundle systemvm.zip in rpms
packaging: backup commands.properties as it does not exist in new rpms
dynamic-roles: remove unnecessary order by ID
Signed-off-by: Will Stevens <williamstevens@gmail.com>
CLOUDSTACK-9377: Fix metrics pagesize issueFixes listing of clusters and host to list all clusters/hosts by passing
pagesize=-1.
/cc @koushik-das @swill @DaanHoogland -- fixes the issue raised on dev@ ML by Rashmi
* pr/1540:
CLOUDSTACK-9377: Fix metrics pagesize issue
Signed-off-by: Will Stevens <williamstevens@gmail.com>
SystemVM cleanupsfrom the logrotate docs
> size - With this, the log file is rotated when the specified size is reached. Size may be specified in bytes (default), kilobytes (sizek), or megabytes (sizem).
> Note: If size and time interval options are specified at same time, only size option take effect. it causes log files to be rotated without regard for the last rotation time. If both log size and timestamp of a log file need to be considered by logrotate, the minsize option should be used. logrotate will rotate log file when they grow bigger than minsize, but not before the additionally specified time interval.
* pr/1414:
systemvm, logrotate: remove daily explicitly as it is ignored
Signed-off-by: Will Stevens <williamstevens@gmail.com>
introduced new capacityType parameter in updateCapacityState method and necessary changes to add capacity_type clause in sql
also fixed incorrect sql builder logic (unused code path for which it is never surfaced )
Added marvin test to check host and storagepool capacity when host is disabled
Added conditions to ensure the capacity_type is added only when capacity_type length is greater than 0.
Added checks in marvin test to ensure the capacity exists for a host before disabling it.
Added checks to avoid index out of range exception
- Unit test to demonstrate denial of service attack
The NioConnection uses blocking handlers for various events such as connect,
accept, read, write. In case a client connects NioServer (used by
agent mgr to service agents on port 8250) but fails to participate in SSL
handshake or just sits idle, this would block the main IO/selector loop in
NioConnection. Such a client could be either malicious or aggresive.
This unit test demonstrates such a malicious client that can perform a
denial-of-service attack on NioServer that blocks it to serve any other client.
- Use non-blocking SSL handshake
- Uses non-blocking socket config in NioClient and NioServer/NioConnection
- Scalable connectivity from agents and peer clustered-management server
- Removes blocking ssl handshake code with a non-blocking code
- Protects from denial-of-service issues that can degrade mgmt server responsiveness
due to an aggressive/malicious client
- Uses separate executor services for handling ssl handshakes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Seems to have a license issue so reverting for now.
This reverts commit 9a20ab8bcbbd39aa012a0ec5a65e66bcc737ee0e, reversing
changes made to 7a0b37a29a8be14011427dcf61bf3ea86e47dbf4.
Due to PR #1054 this patch fixes the dynamic-roles migration script
to use the mysql-connector-python dependency.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Removes bundling of systemvm.zip in cloudstack-common rpms. This is not
done in debian packaging either there we remove for rpms as well, as this
file is not used by any subsystem but systemvm.iso is used.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
