This makes the agent logrotate config to `noreplace` so on upgrade
any changes to the file are not lost.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes the issue that on reconnection, agent LB feature will fail
and only the first ms-host will be tried reconnection again and again.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes a regression introduced in #2799, by exporting $TYPE
before the `patch` is called to patch/extract archives for ssvm/cpvm.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
VMware router will be rebooted based on #2794, per current config
the VRs on reboot will go through fsck checks slowing down the deployment
process by few seconds. This will ensure that fsck checks are done
on every 3rd boot of the VR. The `4` is used because 1st boot is done
during the build of systemvmtemplate appliance.
Add upgrade path for a new 4.11.2 systemvmtemplate.
Other changes:
- Add support for XS 7.5 Fixes#2834.
- Reboot VR only if mgmt gw is not pingable on vmware.
- Enable passive ftp by enabling nf_conntrack_helper. This is change in behaviour since linux 4.7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-9473: storage pool capacity check when volume is resized or migrated
Storage pool checker is not being called on resize and migrate volume.
This may lead to allocated percentage of storage above 100%.
Setup:
1 VMware cluster with 2 Hosts.
Executed Steps:
Applied the following global settings:
storage.overprovisioning.factor = 1
pool.storage.allocated.capacity.disablethreshold = 1
pool.storage.capacity.disablethreshold = 1
Restarted management server
Executed Resize and migrate pool and Observed that Storage pool checker is not performed on resizeVolume and migrateVolume.
Result:
Root cause analysis shows storage pool checker is not called when doing migration and resizing.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In the UI, when Setting up a recurring snapshot for a volume and clicking 'Add', the newly added scheduled snapshot entry is not displayed in the 'Scheduled Snapshots' table. Also, the 'Keep' input field does not limit the length of a number that can be added. This causes the API not return an error that the value is invalid.
After adding a recurring snapshot, it must display in the 'Scheduled Snapshots' table. The 'Keep' input field must restrain a user from entering too large of a number.
In integration work for CCS I found that the service call UserVmService.destroyVm(long uuid, boolean expunge) does not honour the expunge flag. I traced it down to the implementation VirtualMachineManagerImpl.destroy(String vmUuid, boolean expunge).
Testing: manual testing so far, testing will pose some crosscutting challanges as the behaviour and implementation are seperated by about five layers of abstraction.
Arping command in virtual-router was called anyway on python code.
on file: merge.py
line 239, in this code : "dp['gateway'] ='None' ''
later on CsAddress.py line 303
if 'gateway' in self.address:
self.arpPing()
This string 'None' makes if steatement always be true
the solution on #2806 makes dp['gateway'] =''
Cannot be None type because there is a string operation later on code.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
KVM hook script include - logic to execute custom scripts & logging requirements
KVM hook script include - add logic to create custom directory if not exists & extra logging
[VMware] VM is not accessible after migration across clusters.
Once a VM is successfully started, don't delete the files associated with the unregistered VM, if the files are in a storage that is being used by the new VM.
Attempt to unregister a VM in another DC, only if there is a host associated with a VM.
This closes#556
This re-introduces the rebooting of VR after setup of nics/macs in
case of VMware. It also adds a minor enhancement to show the console
esp. for root admins when VRs and systemvms are in starting state.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In the UI, when a VM instance has more than one NIC, the NICs screen does not display all the details of the first NIC. The last few rows of text overlap with the second NIC's text. This is due to the incorrect placement of the second NIC's bar. The default height sizing does not allow enough head space to display all the details of the first NIC before displaying the second NIC's details.
Expected Behaviour:
When a VM instance has more than one NIC, the NICs screen must allow enough height size to display all the details of the first NIC before displaying the second NIC's details. The last few rows of text must not overlap with the second NIC's text.
Current Behaviour:
When a VM instance has more than one NIC, the NICs screen does not allow enough height size to display all the details of the first NIC before displaying the second NIC's details. The last few rows of text overlap with the second NIC's text.
To Reproduce:
In the UI, on the lefthand side, select the Instances link. On the Instances screen, select a VM instance that has more than one NIC and then select the NICs screen. Scroll down to where the second NIC bar is displayed. Notice that it does not display all the details of the first NIC correctly. The last few rows of text overlap with the second NIC's text.
In the UI, when a user navigates to a screen that displays a table of data and hovers the mouse over a sortable column header, the cursor does not change to a hand pointer, indicating to the user that it can be clicked on, in order to sort the table's data rows according to that column.
When the mouse hovers over the non-sortable 'Quickview' column header, it incorrectly displays a hand pointer cursor instead of a default cursor.
When the mouse hovers over a column header, it also does not display the column header's value as a tooltip.
Expected Behaviour:
The cursor type for a sortable column header must display a hand pointer.
The cursor type for the non-sortable 'Quickview' column header must display a default pointer.
When the mouse hovers over a column header it must display the column header's value as a tooltip.
Actual Behaviour:
The cursor type for a sortable column header incorrectly displays a default pointer.
The cursor type for the non-sortable 'Quickview' column header incorrectly displays a hand pointer.
When the mouse hovers over a column header it does not display the column header's value as a tooltip.
To Reproduce:
In the UI, navigate to a screen that displays a table of data and hover the mouse over a sortable column header, the cursor does not change to a hand pointer.
Hover the mouse over the non-sortable 'Quickview' column header and notice that it incorrectly displays a hand pointer cursor instead of a default cursor.
Hover the mouse over a column header and notice that it does not display the column header's value as a tooltip.
When a regular user navigates to the Dashboard screen and hovers over the 'Latest events' entries, the mouse cursor changes to a hand pointer, but it cannot select any of these entries.
Expected Behaviour:
When a user navigates to the Dashboard screen and hovers over the 'Latest events' entries, the mouse cursor must not change to a hand pointer. This will allow the user to make the correct interpretation that the 'Latest events' entries are not selectable.
Actual Behaviour:
When a user navigates to the Dashboard screen and hovers over the 'Latest events' entries, the mouse cursor changes to a hand pointer. This causes a user to incorrectly interpret that the entries are selectable.
To Reproduce:
Log in to the Cloudstack UI as a regular User.
On the Dashboard screen, hover the mouse over the 'Latest events' entries, the cursor changes to a hand pointer. Confirm that the entries cannot be selected.
In the index.html file, the reference to the custom.css file is made on the last line of the <head> tag.
The plugins.js file appends a list of CSS files to the <head> tag dynamically, consequently placing them after the custom.css file and overriding it.
Expected Behaviour:
The plugins.js file must insert the list of CSS files before the custom.css file so that it does not get overridden.
Actual Behaviour:
The plugins.js file appends a list of CSS files to the <head> tag dynamically, consequently placing them after the custom.css file and overriding it.
To Reproduce:
Log in to the Cloudstack UI using your favourite browser.
Use your browser's development tool to view the HTML elements of the index.html loaded in memory.
Expand the <head> element and review the list of CSS <link> elements.
Notice that the list of module and plugins CSS files is appended after the custom.css file.
On the 'NICs' tab, when a user clicks the 'Add network to VM' button to add a network to a VM, the 'Add network to VM' popup screen does not have an IP Address input field to allow a user to define a specific IP Address for a NIC. A user can specify the IP address for the first NIC when creating a VM instance, but cannot do that for subsequent NICs when adding a network to a VM.
To Reproduce:
Go to the 'Instances' screen by clicking the 'Instances' tab on the lefthand side.
On the 'Instances' screen click on a specific VM instance name.
This will open the 'Details' tab for the specific VM instance.
Click on the 'NICs' tab and then click on the 'Add network to VM' button to add a network to a VM.
The 'Add network to VM' popup screen will display.
Actual Behaviour:
The 'Add network to VM' popup screen does not have an IP Address input field to allow a user to define a specific IP Address for a NIC.
Expected behaviour:
The 'Add network to VM' popup screen must have an IP Address input field to allow a user to define a specific IP Address for a NIC.
Since the addNicToVirtualMachine API's ipaddress field is not required, the IP Address input field is also not a required field.
The IP Address input field must be validated for a valid IPv4 formatted value if the user enters anything into the field.
The valid user-specified IPv4 IP Address value must be allocated to the NIC if it is within the acceptable IP range for the chosen Network.
Previously, the ethernet device index was used as rt_table index and
packet marking id/integer. With eth0 that is sometimes used as link-local
interface, the rt_table index `0` would fail as `0` is already defined
as a catchall (unspecified). The fwmarking on packets on eth0 with 0x0
would also fail. This fixes the routing issues, by adding 100 to the
ethernet device index so the value is a non-zero, for example then the
relationship between rt_table index and ethernet would be like:
100 -> Table_eth0 -> eth0 -> fwmark 100 or 0x64
101 -> Table_eth1 -> eth1 -> fwmark 101 or 0x65
102 -> Table_eth2 -> eth2 -> fwmark 102 or 0x66
This would maintain the legacy design of routing based on packet mark
and appropriate routing table rules per table/ids. This also fixes a
minor NPE issue around listing of snapshots.
This also backports fixes to smoketests from master.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
On the 'Register Template From URL' screen, when a user selects the VMware option from the Hypervisor dropdown:
It incorrectly displays the 'HVM' checkbox.
This checkbox must be hidden in the VMware context.
This checkbox must still be visible in any other hypervisor context.
To Reproduce:
Go to the 'Register Template From URL' screen by clicking the 'Templates' tab on the lefthand side.
On the 'Templates' screen click the 'Add' button to display the 'Register Template From URL' screen.
On the 'Register Template From URL' screen, select the VMware option from the Hypervisor dropdown:
Actual Behaviour:
It incorrectly displays the 'HVM' checkbox.
Expected behaviour:
This checkbox must be hidden in the VMware context.
This checkbox must still be visible in any other hypervisor context.
In the UI, on the Instances screen, the Quickview popup window and the Details window do not display the 'Reset SSH Key Pair' button for VMs in a running state. They only display when the VM is in a stopped state. This is inconsistent with the 'Reset Password' button behaviour, where it displays in both VM states: running and stopped. This fixes the issue so that the 'Reset SSH Key Pair' button also displays in both VM states.
Expected Behaviour:
In the UI, on the Instances screen, the Quickview popup window and the Details window must display the 'Reset SSH Key Pair' button in both VM states: running and stopped. When a user clicks on the 'Reset SSH Key Pair' button and a VM is in a running state, it will display a message "Vm xxx should be stopped to do SSH Key reset".
Actual Behaviour:
In the UI, on the Instances screen, the Quickview popup window and the Details window do not display the 'Reset SSH Key Pair' button for VMs in a running state. It only displays when the VM is in a stopped state.
In the Add Zone Wizard, when a user lands on the Physical Network page, by default the first Physical Network gets initialized with the 3 Traffic Types: Guest, Management and Public. When a user drags the Management or Public Traffic Types from the first Physical Network to a second or nth Physical Network and then clicks the next button to go to the next screen, and then decides to click the previous button to go back to the Physical Network screen, the UI initializes the physicalNetwork again and thus moves these Traffic Types back to their original position in the first Physical Network as if it is the first time the user navigated to this page.
A fix was made so that when a user clicks the previous button to go back to the Physical Network screen, it does not initialize the physicalNetwork again, therefore leaving the user-defined Traffic Type configuration as it was before the next button was clicked.
On the 'Register Template From URL' screen, when a user selects the KVM option from the Hypervisor dropdown:
1) It incorrectly displays the 'Original XS Version is 6.1' checkbox. This checkbox should be hidden in the KVM context.
2) The 'Root Disk Controller' dropdown should display the default option of 'osdefault' instead of a blank default option.
Fixes the version in pom etc. to be consistent with versioning pattern as X.Y.Z.0-SNAPSHOT after a minor release.
Signed-off-by: Khosrow Moossavi <khos2ow@gmail.com>
