mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-11-02 20:02:05 +01:00
199 lines
7.8 KiB
ReStructuredText
199 lines
7.8 KiB
ReStructuredText
PPPoE server
|
|
------------
|
|
|
|
VyOS utilizes `accel-ppp`_ to provide PPPoE server functionality. It can be
|
|
used with local authentication or a connected RADIUS server.
|
|
|
|
.. note:: **Please be aware, due to an upstream bug, config changes/commits
|
|
will restart the ppp daemon and will reset existing PPPoE connections from
|
|
connected users, in order to become effective.**
|
|
|
|
Configuration
|
|
^^^^^^^^^^^^^
|
|
|
|
The example below uses ACN as access-concentrator name, assigns an address
|
|
from the pool 10.1.1.100-111, terminates at the local endpoint 10.1.1.1 and
|
|
serves requests only on eth1.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service pppoe-server access-concentrator 'ACN'
|
|
set service pppoe-server authentication local-users username foo password 'bar'
|
|
set service pppoe-server authentication mode 'local'
|
|
set service pppoe-server client-ip-pool start '10.1.1.100'
|
|
set service pppoe-server client-ip-pool stop '10.1.1.111'
|
|
set service pppoe-server dns-servers server-1 '10.100.100.1'
|
|
set service pppoe-server dns-servers server-2 '10.100.200.1'
|
|
set service pppoe-server interface 'eth1'
|
|
set service pppoe-server local-ip '10.1.1.2'
|
|
|
|
|
|
Connections can be locally checked via the command
|
|
|
|
.. code-block:: sh
|
|
|
|
show pppoe-server sessions
|
|
ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
|
|
-------+----------+------------+-------------------+-------------+--------+----------+----------+----------
|
|
ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
|
|
|
|
|
|
Client IP address pools
|
|
=======================
|
|
|
|
To automatically assign the client an IP address as tunnel endpoint, a client IP pool is needed. The source can be either RADIUS or a local subnet or IP range defintion.
|
|
|
|
Once the local tunnel endpoint ``set service pppoe-server local-ip '10.1.1.2'`` has been defined, the client IP pool can be either defined as a range or as subnet using CIDR notation.
|
|
If the CIDR notation is used, multiple subnets can be setup which are used sequentially.
|
|
|
|
**Client IP address via IP range defintion**
|
|
|
|
.. code-block:: sh
|
|
|
|
set service pppoe-server client-ip-pool start '10.1.1.100'
|
|
set service pppoe-server client-ip-pool stop '10.1.1.111'
|
|
|
|
|
|
**Client IP subnets via CIDR notation**
|
|
|
|
.. code-block:: sh
|
|
|
|
set service pppoe-server client-ip-pool subnet '10.1.1.0/24'
|
|
set service pppoe-server client-ip-pool subnet '10.1.2.0/24'
|
|
set service pppoe-server client-ip-pool subnet '10.1.3.0/24'
|
|
|
|
|
|
|
|
**RADIUS based IP pools (Framed-IP-Address)**
|
|
|
|
To use a radius server, you need to switch to authentication mode radius and
|
|
of course need to specify an IP for the server. You can have multiple RADIUS
|
|
server configured, if you wish to achieve redundancy.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service pppoe-server access-concentrator 'ACN'
|
|
set service pppoe-server authentication mode 'radius'
|
|
set service pppoe-server authentication radius-server 10.1.100.1 secret 'secret'
|
|
set service pppoe-server interface 'eth1'
|
|
set service pppoe-server local-ip '10.1.1.2'
|
|
|
|
RADIUS provides the IP addresses in the example above via Framed-IP-Address.
|
|
|
|
**RADIUS sessions management DM/CoA**
|
|
|
|
For remotely disconnect sessions and change some authentication parameters you can configure dae-server
|
|
|
|
.. code-block:: sh
|
|
|
|
set service pppoe-server authentication radius-settings dae-server ip-address '10.1.1.2'
|
|
set service pppoe-server authentication radius-settings dae-server port '3799'
|
|
set service pppoe-server authentication radius-settings dae-server secret 'secret123'
|
|
|
|
Example, from radius-server send command for disconnect client with username test
|
|
|
|
.. code-block:: sh
|
|
|
|
root@radius-server:~# echo "User-Name=test" | radclient -x 10.1.1.2:3799 disconnect secret123
|
|
|
|
You can also use another attributes for identify client for disconnect, like Framed-IP-Address, Acct-Session-Id, etc.
|
|
Result commands appears in log
|
|
|
|
.. code-block:: sh
|
|
|
|
show log | match Disconnect*
|
|
|
|
Example for changing rate-limit via RADIUS CoA
|
|
|
|
.. code-block:: sh
|
|
|
|
echo "User-Name=test,Filter-Id=5000/4000" | radclient 10.1.1.2:3799 coa secret123
|
|
|
|
Filter-Id=5000/4000 (means 5000Kbit down-stream rate and 4000Kbit up-stream rate)
|
|
If attribute Filter-Id redefined, replace it in radius coa request
|
|
|
|
Bandwidth Shaping
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
Bandwidth rate limits can be set for local users or RADIUS based attributes.
|
|
|
|
Bandwidth Shaping for local users
|
|
=================================
|
|
|
|
The rate-limit is set in kbit/sec.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service pppoe-server access-concentrator 'ACN'
|
|
set service pppoe-server authentication local-users username foo password 'bar'
|
|
set service pppoe-server authentication local-users username foo rate-limit download '20480'
|
|
set service pppoe-server authentication local-users username foo rate-limit upload '10240'
|
|
set service pppoe-server authentication mode 'local'
|
|
set service pppoe-server client-ip-pool start '10.1.1.100'
|
|
set service pppoe-server client-ip-pool stop '10.1.1.111'
|
|
set service pppoe-server dns-servers server-1 '10.100.100.1'
|
|
set service pppoe-server dns-servers server-2 '10.100.200.1'
|
|
set service pppoe-server interface 'eth1'
|
|
set service pppoe-server local-ip '10.1.1.2'
|
|
|
|
|
|
Once the user is connected, the user session is using the set limits and can be displayed via 'show pppoe-server sessions'.
|
|
|
|
.. code-block:: sh
|
|
|
|
show pppoe-server sessions
|
|
ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
|
|
-------+----------+------------+-------------------+-------------+--------+----------+----------+----------
|
|
ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
|
|
|
|
|
|
RADIUS based shaper setup
|
|
=========================
|
|
|
|
The current attribute 'Filter-Id' is being used as default and can be setup within RADIUS:
|
|
|
|
Filter-Id=2000/3000 (means 2000Kbit down-stream rate and 3000Kbit up-stream rate)
|
|
|
|
The command below enables it, assuming the RADIUS connection has been setup and is working.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service pppoe-server authentication radius-settings rate-limit enable
|
|
|
|
Other attributes can be used, but they have to be in one of the dictionaries in /usr/share/accel-ppp/radius.
|
|
|
|
|
|
|
|
Practical Configuration Examples
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Dual-stack provisioning with IPv6 PD via pppoe
|
|
==============================================
|
|
|
|
The example below covers a dual-stack configuration via pppoe-server.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service pppoe-server authentication local-users username test password 'test'
|
|
set service pppoe-server authentication mode 'local'
|
|
set service pppoe-server client-ip-pool start '192.168.0.1'
|
|
set service pppoe-server client-ip-pool stop '192.168.0.10'
|
|
set service pppoe-server client-ipv6-pool delegate-prefix '2001:db8:8003::1/48,56'
|
|
set service pppoe-server client-ipv6-pool prefix '2001:db8:8002::1/48,64'
|
|
set service pppoe-server dns-servers server-1 '8.8.8.8'
|
|
set service pppoe-server dnsv6-servers server-1 '2001:4860:4860::8888'
|
|
set service pppoe-server interface 'eth2'
|
|
set service pppoe-server local-ip '10.100.100.1'
|
|
|
|
|
|
The client, once successfully authenticated, will receive an IPv4 and an IPv6 /64 address, to terminate the pppoe endpoint on the client side and a /56 subnet for the clients internal use.
|
|
|
|
.. code-block:: sh
|
|
|
|
vyos@pppoe-server:~$ sh pppoe-server sessions
|
|
ifname | username | ip | ip6 | ip6-dp | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
|
|
--------+----------+-------------+--------------------------+---------------------+-------------------+------------+--------+----------+----------+----------
|
|
ppp0 | test | 192.168.0.1 | 2001:db8:8002:0:200::/64 | 2001:db8:8003::1/56 | 08:00:27:12:42:eb | | active | 00:00:49 | 875 B | 2.1 KiB
|
|
|
|
.. _`accel-ppp`: https://accel-ppp.org/
|