mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-11-03 04:12:03 +01:00
130 lines
5.4 KiB
ReStructuredText
130 lines
5.4 KiB
ReStructuredText
IPoE server
|
|
------------
|
|
|
|
VyOS utilizes `accel-ppp`_ to provide IPoE server functionality. It can be
|
|
used with local authentication (mac-address) or a connected RADIUS server.
|
|
|
|
.. note:: **Please be aware, due to an upstream bug, config changes/commits
|
|
will restart the ppp daemon and will reset existing IPoE sessions,
|
|
in order to become effective.**
|
|
|
|
Configuration
|
|
^^^^^^^^^^^^^
|
|
|
|
IPoE can be configure on different interfaces, it will depend on each specific situation which interface will provide IPoE to clients.
|
|
The clients mac address and the incoming interface is being used as control parameter, to authenticate a client.
|
|
|
|
The example configuration below will assign an IP to the client on the incoming interface eth2 with the client mac address 08:00:27:2f:d8:06.
|
|
Other DHCP discovery requests will be ignored, unless the client mac has been enabled in the configuration.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06
|
|
set service ipoe-server authentication mode 'local'
|
|
set service ipoe-server dns-server server-1 '8.8.8.8'
|
|
set service ipoe-server dns-server server-2 '8.8.4.4'
|
|
set service ipoe-server interface eth2 client-subnet '192.168.0.0/24'
|
|
|
|
|
|
The first address of the parameter ``client-subnet``, will be used as the default gateway.
|
|
Connected sessions can be checked via the ``show ipoe-server sessions`` command.
|
|
|
|
.. code-block:: sh
|
|
|
|
vyos@vyos:~$ show ipoe-server sessions
|
|
|
|
ifname | called-sid | calling-sid | ip | ip6 | ip6-dp | rate-limit | state | uptime | sid
|
|
-------+------------+-------------------+-------------+-----+--------+------------+--------+----------+------------------
|
|
ipoe0 | eth2 | 08:00:27:2f:d8:06 | 192.168.0.2 | | | | active | 00:45:05 | dccc870fd3134612
|
|
|
|
|
|
IPv6 SLAAC and IA-PD
|
|
====================
|
|
|
|
To configure IPv6 assignments for clients, two options need to be configured. A global prefix which is terminated on the clients cpe and a delegated prefix, the client can use
|
|
for devices routed via the clients cpe.
|
|
|
|
IPv6 DNS addresses are optional.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service ipoe-server authentication interface eth3 mac-address 08:00:27:2F:D8:06
|
|
set service ipoe-server authentication mode 'local'
|
|
set service ipoe-server client-ipv6-pool delegate-prefix '2001:db8:1::/48,56'
|
|
set service ipoe-server client-ipv6-pool prefix '2001:db8::/48,64'
|
|
set service ipoe-server dnsv6-server server-1 '2001:db8::'
|
|
set service ipoe-server dnsv6-server server-2 '2001:db8:aaa::'
|
|
set service ipoe-server dnsv6-server server-3 '2001:db8:bbb::'
|
|
set service ipoe-server interface eth3 client-subnet '192.168.1.0/24'
|
|
|
|
.. code-block:: sh
|
|
|
|
vyos@ipoe-server# run sh ipoe-server sessions
|
|
ifname | called-sid | calling-sid | ip | ip6 | ip6-dp | rate-limit | state | uptime | sid
|
|
-------+------------+-------------------+-------------+---------------------------------+-----------------+------------+--------+----------+------------------
|
|
ipoe0 | eth3 | 08:00:27:2f:d8:06 | 192.168.1.2 | 2001:db8::a00:27ff:fe2f:d806/64 | 2001:db8:1::/56 | | active | 01:02:59 | 4626faf71b12cc25
|
|
|
|
|
|
The clients cpe can now communicate via IPv4 or IPv6. All devices behind ``2001:db8::a00:27ff:fe2f:d806/64`` can use addresses from ``2001:db8:1::/56`` and can
|
|
globally communicate without the need of any NAT rules.
|
|
|
|
|
|
Automatic VLAN creation
|
|
=======================
|
|
|
|
To create VLANs per user during runtime, the following settings are required on a per interface basis. VLAN ID and VLAN range can be present in the configuration at the same time.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service ipoe-server interface eth2 network vlan
|
|
set service ipoe-server interface eth2 vlan-id 100
|
|
set service ipoe-server interface eth2 vlan-id 200
|
|
set service ipoe-server interface eth2 vlan-range 1000-2000
|
|
set service ipoe-server interface eth2 vlan-range 2500-2700
|
|
|
|
|
|
RADIUS Setup
|
|
^^^^^^^^^^^^
|
|
|
|
To use a RADIUS server for authentication and bandwidth-shaping, the following example configuration can be used.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service ipoe-server authentication mode 'radius'
|
|
set service ipoe-server authentication radius-server 10.100.100.1 secret 'password'
|
|
|
|
|
|
Bandwidth Shaping
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
Bandwidth rate limits can be set for local users within the configuration or via RADIUS based attributes.
|
|
|
|
|
|
Bandwidth Shaping for local users
|
|
=================================
|
|
|
|
The rate-limit is set in kbit/sec.
|
|
|
|
.. code-block:: sh
|
|
|
|
set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 rate-limit download '500'
|
|
set service ipoe-server authentication interface eth2 mac-address 08:00:27:2f:d8:06 rate-limit upload '500'
|
|
set service ipoe-server authentication mode 'local'
|
|
set service ipoe-server dns-server server-1 '8.8.8.8'
|
|
set service ipoe-server dns-server server-2 '8.8.4.4'
|
|
set service ipoe-server interface eth2 client-subnet '192.168.0.0/24'
|
|
|
|
|
|
.. code-block:: sh
|
|
|
|
vyos@vyos# run show ipoe-server sessions
|
|
|
|
ifname | called-sid | calling-sid | ip | ip6 | ip6-dp | rate-limit | state | uptime | sid
|
|
-------+------------+-------------------+-------------+-----+--------+------------+--------+----------+------------------
|
|
ipoe0 | eth2 | 08:00:27:2f:d8:06 | 192.168.0.2 | | | 500/500 | active | 00:00:05 | dccc870fd31349fb
|
|
|
|
|
|
|
|
|
|
.. _`accel-ppp`: https://accel-ppp.org/
|