mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
156 lines
6.6 KiB
ReStructuredText
156 lines
6.6 KiB
ReStructuredText
.. _examples-azure-vpn-dual-bgp:
|
|
|
|
Route-Based Redundant Site-to-Site VPN to Azure (BGP over IKEv2/IPsec)
|
|
----------------------------------------------------------------------
|
|
|
|
This guide shows an example of a redundant (active-active) route-based IKEv2
|
|
site-to-site VPN to Azure using VTI
|
|
and BGP for dynamic routing updates.
|
|
|
|
Prerequisites
|
|
^^^^^^^^^^^^^
|
|
|
|
- A pair of Azure VNet Gateways deployed in active-active
|
|
configuration with BGP enabled.
|
|
|
|
- A local network gateway deployed in Azure representing
|
|
the Vyos device, matching the below Vyos settings except for
|
|
address space, which only requires the Vyos private IP, in
|
|
this example 10.10.0.5/32
|
|
|
|
- A connection resource deployed in Azure linking the
|
|
Azure VNet gateway and the local network gateway representing
|
|
the Vyos device.
|
|
|
|
Example
|
|
^^^^^^^
|
|
|
|
+---------------------------------------+---------------------+
|
|
| WAN Interface | eth0 |
|
|
+---------------------------------------+---------------------+
|
|
| On-premises address space | 10.10.0.0/16 |
|
|
+---------------------------------------+---------------------+
|
|
| Azure address space | 10.0.0.0/16 |
|
|
+---------------------------------------+---------------------+
|
|
| Vyos public IP | 198.51.100.3 |
|
|
+---------------------------------------+---------------------+
|
|
| Vyos private IP | 10.10.0.5 |
|
|
+---------------------------------------+---------------------+
|
|
| Azure VNet Gateway 1 public IP | 203.0.113.2 |
|
|
+---------------------------------------+---------------------+
|
|
| Azure VNet Gateway 2 public IP | 203.0.113.3 |
|
|
+---------------------------------------+---------------------+
|
|
| Azure VNet Gateway BGP IP | 10.0.0.4,10.0.0.5 |
|
|
+---------------------------------------+---------------------+
|
|
| Pre-shared key | ch00s3-4-s3cur3-psk |
|
|
+---------------------------------------+---------------------+
|
|
| Vyos ASN | 64499 |
|
|
+---------------------------------------+---------------------+
|
|
| Azure ASN | 65540 |
|
|
+---------------------------------------+---------------------+
|
|
|
|
Vyos configuration
|
|
^^^^^^^^^^^^^^^^^^
|
|
|
|
- Configure the IKE and ESP settings to match a subset
|
|
of those supported by Azure:
|
|
|
|
.. code-block:: none
|
|
|
|
set vpn ipsec esp-group AZURE compression 'disable'
|
|
set vpn ipsec esp-group AZURE lifetime '3600'
|
|
set vpn ipsec esp-group AZURE mode 'tunnel'
|
|
set vpn ipsec esp-group AZURE pfs 'dh-group2'
|
|
set vpn ipsec esp-group AZURE proposal 1 encryption 'aes256'
|
|
set vpn ipsec esp-group AZURE proposal 1 hash 'sha1'
|
|
|
|
set vpn ipsec ike-group AZURE dead-peer-detection action 'restart'
|
|
set vpn ipsec ike-group AZURE dead-peer-detection interval '15'
|
|
set vpn ipsec ike-group AZURE dead-peer-detection timeout '30'
|
|
set vpn ipsec ike-group AZURE ikev2-reauth 'yes'
|
|
set vpn ipsec ike-group AZURE key-exchange 'ikev2'
|
|
set vpn ipsec ike-group AZURE lifetime '28800'
|
|
set vpn ipsec ike-group AZURE proposal 1 dh-group '2'
|
|
set vpn ipsec ike-group AZURE proposal 1 encryption 'aes256'
|
|
set vpn ipsec ike-group AZURE proposal 1 hash 'sha1'
|
|
|
|
- Enable IPsec on eth0
|
|
|
|
.. code-block:: none
|
|
|
|
set vpn ipsec ipsec-interfaces interface 'eth0'
|
|
|
|
- Configure two VTIs with a dummy IP address each
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces vti vti1 address '10.10.1.5/32'
|
|
set interfaces vti vti1 description 'Azure Primary Tunnel'
|
|
|
|
set interfaces vti vti2 address '10.10.1.6/32'
|
|
set interfaces vti vti2 description 'Azure Secondary Tunnel'
|
|
|
|
- Clamp the VTI's MSS to 1350 to avoid PMTU blackholes.
|
|
|
|
.. code-block:: none
|
|
|
|
set firewall options interface vti1 adjust-mss 1350
|
|
set firewall options interface vti2 adjust-mss 1350
|
|
|
|
- Configure the VPN tunnels
|
|
|
|
.. code-block:: none
|
|
|
|
set vpn ipsec site-to-site peer 203.0.113.2 authentication id '198.51.100.3'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 authentication mode 'pre-shared-secret'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 authentication pre-shared-secret 'ch00s3-4-s3cur3-psk'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 authentication remote-id '203.0.113.2'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 connection-type 'respond'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 description 'AZURE PRIMARY TUNNEL'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 ike-group 'AZURE'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 ikev2-reauth 'inherit'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 local-address '10.10.0.5'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 vti bind 'vti1'
|
|
set vpn ipsec site-to-site peer 203.0.113.2 vti esp-group 'AZURE'
|
|
|
|
set vpn ipsec site-to-site peer 203.0.113.3 authentication id '198.51.100.3'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 authentication mode 'pre-shared-secret'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 authentication pre-shared-secret 'ch00s3-4-s3cur3-psk'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 authentication remote-id '203.0.113.3'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 connection-type 'respond'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 description 'AZURE SECONDARY TUNNEL'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 ike-group 'AZURE'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 ikev2-reauth 'inherit'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 local-address '10.10.0.5'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 vti bind 'vti2'
|
|
set vpn ipsec site-to-site peer 203.0.113.3 vti esp-group 'AZURE'
|
|
|
|
- **Important**: Add an interface route to reach both Azure's BGP listeners
|
|
|
|
.. code-block:: none
|
|
|
|
set protocols static interface-route 10.0.0.4/32 next-hop-interface vti1
|
|
set protocols static interface-route 10.0.0.5/32 next-hop-interface vti2
|
|
|
|
- Configure your BGP settings
|
|
|
|
.. code-block:: none
|
|
|
|
set protocols bgp 64499 neighbor 10.0.0.4 remote-as '65540'
|
|
set protocols bgp 64499 neighbor 10.0.0.4 address-family ipv4-unicast soft-reconfiguration 'inbound'
|
|
set protocols bgp 64499 neighbor 10.0.0.4 timers holdtime '30'
|
|
set protocols bgp 64499 neighbor 10.0.0.4 timers keepalive '10'
|
|
|
|
set protocols bgp 64499 neighbor 10.0.0.5 remote-as '65540'
|
|
set protocols bgp 64499 neighbor 10.0.0.5 address-family ipv4-unicast soft-reconfiguration 'inbound'
|
|
set protocols bgp 64499 neighbor 10.0.0.5 timers holdtime '30'
|
|
set protocols bgp 64499 neighbor 10.0.0.5 timers keepalive '10'
|
|
|
|
- **Important**: Disable connected check, otherwise the routes learned
|
|
from Azure will not be imported into the routing table.
|
|
|
|
.. code-block:: none
|
|
|
|
set protocols bgp 64499 neighbor 10.0.0.4 disable-connected-check
|
|
set protocols bgp 64499 neighbor 10.0.0.5 disable-connected-check
|