mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
82 lines
3.8 KiB
ReStructuredText
82 lines
3.8 KiB
ReStructuredText
.. _flow-accounting:
|
|
|
|
NetFlow is a feature that was introduced on Cisco routers around 1996 that
|
|
provides the ability to collect IP network traffic as it enters or exits an
|
|
interface. By analyzing the data provided by NetFlow, a network administrator
|
|
can determine things such as the source and destination of traffic, class of
|
|
service, and the causes of congestion. A typical flow monitoring setup (using
|
|
NetFlow) consists of three main components:
|
|
|
|
* Flow exporter: aggregates packets into flows and exports flow records towards
|
|
one or more flow collectors
|
|
* Flow collector: responsible for reception, storage and pre-processing of flow
|
|
data received from a flow exporter
|
|
* Analysis application: analyzes received flow data in the context of intrusion
|
|
detection or traffic profiling, for example
|
|
|
|
For connectionless protocols as like ICMP and UDP, a flow is considered complete
|
|
once no more packets for this flow appear after configurable timeout.
|
|
|
|
NetFlow is usually enabled on a per-interface basis to limit load on the router
|
|
components involved in NetFlow, or to limit the amount of NetFlow records
|
|
exported.
|
|
|
|
VyOS supports flow accounting through NetFlow (version 5, 9 and 10) or sFlow.
|
|
|
|
Flow Accounting
|
|
---------------
|
|
|
|
In order for flow accounting information to be collected and displayed for an
|
|
interface, the interface must be configured for flow accounting. The following
|
|
example shows how to configure ``eth0`` and ``bond3`` for flow accounting.
|
|
|
|
.. code-block:: sh
|
|
|
|
set system flow-accounting interface eth0
|
|
set system flow-accounting interface bond3
|
|
|
|
|
|
NetFlow is a protocol originating from Cisco Systems. It works on level3.
|
|
VyOS supports version 5, 9 and 10 (IPFIX - IP Flow Information Export)
|
|
|
|
NetFlow v5 example:
|
|
|
|
.. code-block:: sh
|
|
|
|
set system flow-accounting netflow engine-id 100
|
|
set system flow-accounting netflow version 5
|
|
set system flow-accounting netflow server 192.168.2.10 port 2055
|
|
|
|
Displaying Flow Accounting Information
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Once flow accounting is configured on an interfaces it provides the ability to
|
|
display captured network traffic information for all configured interfaces.
|
|
|
|
The following op-mode command shows flow accounting for eth0.
|
|
|
|
.. code-block:: sh
|
|
|
|
vyos@vyos:~$ show flow-accounting interface eth0
|
|
flow-accounting for [eth0]
|
|
Src Addr Dst Addr Sport Dport Proto Packets Bytes Flows
|
|
0.0.0.0 192.0.2.50 811 811 udp 7733 591576 0
|
|
0.0.0.0 192.0.2.50 811 811 udp 7669 586558 1
|
|
192.0.2.200 192.0.2.51 56188 22 tcp 586 36504 1
|
|
192.0.2.99 192.0.2.51 61636 161 udp 46 6313 4
|
|
192.0.2.99 192.0.2.51 61638 161 udp 42 5364 9
|
|
192.0.2.99 192.0.2.51 61640 161 udp 42 5111 3
|
|
192.0.2.200 192.0.2.51 54702 22 tcp 86 4432 1
|
|
192.0.2.99 192.0.2.51 62509 161 udp 24 3540 1
|
|
192.0.2.99 192.0.2.51 0 0 icmp 49 2989 8
|
|
192.0.2.99 192.0.2.51 54667 161 udp 18 2658 1
|
|
192.0.2.99 192.0.2.51 54996 161 udp 18 2622 1
|
|
192.0.2.99 192.0.2.51 63708 161 udp 18 2622 1
|
|
192.0.2.99 192.0.2.51 62111 161 udp 18 2622 1
|
|
192.0.2.99 192.0.2.51 61646 161 udp 16 1977 4
|
|
192.0.2.99 192.0.2.51 56038 161 udp 10 1256 1
|
|
192.0.2.99 192.0.2.51 55570 161 udp 6 1146 1
|
|
192.0.2.99 192.0.2.51 54599 161 udp 6 1134 1
|
|
192.0.2.99 192.0.2.51 56304 161 udp 8 1029 1
|
|
|