mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
210 lines
6.7 KiB
ReStructuredText
210 lines
6.7 KiB
ReStructuredText
.. _routing-static:
|
|
|
|
######
|
|
Static
|
|
######
|
|
|
|
Static routes are manually configured routes, which, in general, cannot be
|
|
updated dynamically from information VyOS learns about the network topology from
|
|
other routing protocols. However, if a link fails, the router will remove
|
|
routes, including static routes, from the :abbr:`RIPB (Routing Information
|
|
Base)` that used this interface to reach the next hop. In general, static
|
|
routes should only be used for very simple network topologies, or to override
|
|
the behavior of a dynamic routing protocol for a small number of routes. The
|
|
collection of all routes the router has learned from its configuration or from
|
|
its dynamic routing protocols is stored in the RIB. Unicast routes are directly
|
|
used to determine the forwarding table used for unicast packet forwarding.
|
|
|
|
*************
|
|
Static Routes
|
|
*************
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> next-hop <address>
|
|
|
|
Configure next-hop `<address>` for an IPv4 static route. Multiple static
|
|
routes can be created.
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> next-hop <address> disable
|
|
|
|
Disable this IPv4 static route entry.
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> next-hop <address>
|
|
distance <distance>
|
|
|
|
Defines next-hop distance for this route, routes with smaller administrative
|
|
distance are elected prior to those with a higher distance.
|
|
|
|
Range is 1 to 255, default is 1.
|
|
|
|
.. note:: Routes with a distance of 255 are effectively disabled and not
|
|
installed into the kernel.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> next-hop <address>
|
|
|
|
Configure next-hop `<address>` for an IPv6 static route. Multiple static
|
|
routes can be created.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> next-hop <address> disable
|
|
|
|
Disable this IPv6 static route entry.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> next-hop <address>
|
|
distance <distance>
|
|
|
|
Defines next-hop distance for this route, routes with smaller administrative
|
|
distance are elected prior to those with a higher distance.
|
|
|
|
Range is 1 to 255, default is 1.
|
|
|
|
.. note:: Routes with a distance of 255 are effectively disabled and not
|
|
installed into the kernel.
|
|
|
|
|
|
Interface Routes
|
|
================
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> interface
|
|
<interface>
|
|
|
|
Allows you to configure the next-hop interface for an interface-based IPv4
|
|
static route. `<interface>` will be the next-hop interface where traffic is
|
|
routed for the given `<subnet>`.
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> interface
|
|
<interface> disable
|
|
|
|
Disables interface-based IPv4 static route.
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> interface
|
|
<interface> distance <distance>
|
|
|
|
Defines next-hop distance for this route, routes with smaller administrative
|
|
distance are elected prior to those with a higher distance.
|
|
|
|
Range is 1 to 255, default is 1.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> interface
|
|
<interface>
|
|
|
|
Allows you to configure the next-hop interface for an interface-based IPv6
|
|
static route. `<interface>` will be the next-hop interface where traffic is
|
|
routed for the given `<subnet>`.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> interface
|
|
<interface> disable
|
|
|
|
Disables interface-based IPv6 static route.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> interface
|
|
<interface> distance <distance>
|
|
|
|
Defines next-hop distance for this route, routes with smaller administrative
|
|
distance are elected prior to those with a higher distance.
|
|
|
|
Range is 1 to 255, default is 1.
|
|
|
|
|
|
Blackhole
|
|
=========
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> blackhole
|
|
|
|
Use this command to configure a "black-hole" route on the router. A
|
|
black-hole route is a route for which the system silently discard packets
|
|
that are matched. This prevents networks leaking out public interfaces, but
|
|
it does not prevent them from being used as a more specific route inside your
|
|
network.
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> blackhole distance <distance>
|
|
|
|
Defines blackhole distance for this route, routes with smaller administrative
|
|
distance are elected prior to those with a higher distance.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> blackhole
|
|
|
|
Use this command to configure a "black-hole" route on the router. A
|
|
black-hole route is a route for which the system silently discard packets
|
|
that are matched. This prevents networks leaking out public interfaces, but
|
|
it does not prevent them from being used as a more specific route inside your
|
|
network.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> blackhole distance <distance>
|
|
|
|
Defines blackhole distance for this route, routes with smaller administrative
|
|
distance are elected prior to those with a higher distance.
|
|
|
|
|
|
Alternate Routing Tables
|
|
========================
|
|
|
|
TBD
|
|
|
|
Alternate routing tables are used with policy based routing by utilizing
|
|
:ref:`vrf`.
|
|
|
|
|
|
.. _routing-arp:
|
|
|
|
###
|
|
ARP
|
|
###
|
|
|
|
:abbr:`ARP (Address Resolution Protocol)` is a communication protocol used for
|
|
discovering the link layer address, such as a MAC address, associated with a
|
|
given internet layer address, typically an IPv4 address. This mapping is a
|
|
critical function in the Internet protocol suite. ARP was defined in 1982 by
|
|
:rfc:`826` which is Internet Standard STD 37.
|
|
|
|
In Internet Protocol Version 6 (IPv6) networks, the functionality of ARP is
|
|
provided by the Neighbor Discovery Protocol (NDP).
|
|
|
|
To manipulate or display ARP_ table entries, the following commands are
|
|
implemented.
|
|
|
|
*********
|
|
Configure
|
|
*********
|
|
|
|
.. cfgcmd:: set protocols static arp interface <interface> address <host>
|
|
mac <mac>
|
|
|
|
This will configure a static ARP entry always resolving `<address>` to
|
|
`<mac>` for interface `<interface>`.
|
|
|
|
Example:
|
|
|
|
.. code-block:: none
|
|
|
|
set protocols static arp interface eth0 address 192.0.2.1 mac 01:23:45:67:89:01
|
|
|
|
|
|
*********
|
|
Operation
|
|
*********
|
|
|
|
|
|
.. opcmd:: show protocols static arp
|
|
|
|
Display all known ARP table entries spanning across all interfaces
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show protocols static arp
|
|
Address HWtype HWaddress Flags Mask Iface
|
|
10.1.1.1 ether 00:53:00:de:23:2e C eth1
|
|
10.1.1.100 ether 00:53:00:de:23:aa CM eth1
|
|
|
|
|
|
.. opcmd:: show protocols static arp interface eth1
|
|
|
|
Display all known ARP table entries on a given interface only (`eth1`):
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show protocols static arp interface eth1
|
|
Address HWtype HWaddress Flags Mask Iface
|
|
10.1.1.1 ether 00:53:00:de:23:2e C eth1
|
|
10.1.1.100 ether 00:53:00:de:23:aa CM eth1
|
|
|
|
.. _ARP: https://en.wikipedia.org/wiki/Address_Resolution_Protocol
|