mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
62 lines
1.8 KiB
ReStructuredText
62 lines
1.8 KiB
ReStructuredText
#####
|
|
sFlow
|
|
#####
|
|
|
|
VyOS supports sFlow accounting for both IPv4 and IPv6 traffic. The system acts as a flow exporter, and you are free to use it with any compatible collector.
|
|
|
|
sFlow is a technology that enables monitoring of network traffic by sending sampled packets to a collector device.
|
|
|
|
The sFlow accounting based on hsflowd https://sflow.net/
|
|
|
|
Configuration
|
|
=============
|
|
|
|
.. cfgcmd:: set system sflow agent-address <address>
|
|
|
|
Configure sFlow agent IPv4 or IPv6 address
|
|
|
|
|
|
.. cfgcmd:: set system sflow agent-interface <interface>
|
|
|
|
Configure agent IP address associated with this interface.
|
|
|
|
|
|
.. cfgcmd:: set system sflow drop-monitor-limit <limit>
|
|
|
|
Dropped packets reported on DROPMON Netlink channel by Linux kernel are exported via the standard sFlow v5 extension for reporting dropped packets
|
|
|
|
.. cfgcmd:: set system sflow interface <interface>
|
|
|
|
Configure and enable collection of flow information for the interface identified by <interface>.
|
|
|
|
You can configure multiple interfaces which would participate in sflow accounting.
|
|
|
|
|
|
.. cfgcmd:: set system sflow polling <sec>
|
|
|
|
Configure schedule counter-polling in seconds (default: 30)
|
|
|
|
.. cfgcmd:: set system sflow sampling-rate <rate>
|
|
|
|
Use this command to configure the sampling rate for sFlow accounting (default: 1000)
|
|
|
|
.. cfgcmd:: set system sflow server <address> port <port>
|
|
|
|
Configure address of sFlow collector. sFlow server at <address> can be both listening on an IPv4 or IPv6 address.
|
|
|
|
|
|
Example
|
|
=======
|
|
|
|
.. code-block:: none
|
|
|
|
set system sflow agent-address '192.0.2.14'
|
|
set system sflow agent-interface 'eth0'
|
|
set system sflow drop-monitor-limit '50'
|
|
set system sflow interface 'eth0'
|
|
set system sflow interface 'eth1'
|
|
set system sflow polling '30'
|
|
set system sflow sampling-rate '1000'
|
|
set system sflow server 192.0.2.1 port '6343'
|
|
set system sflow server 203.0.113.23 port '6343'
|