mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-11-02 20:02:05 +01:00
c25c40dfa9
* order workflows and add submodule * rename gitmodules file * delete docs/.gitignore * add vyos custom linter * correct __pycache__ in gitignore * add test-coverage.py * move draw.io folder * arrange changelog, install history and about * arrange: firewall * arrange: highavailability * arrange: loadbalancing * arrange: nat * arrange: services * sort configexamples and configuration interfaces * wireles: rename wireless * rearrange: Protocols and Policy * rearrange: Firewall and Zone Policy * rearrange: Interfaces * rearrange: Interfaces * rearrange: dynamic DNS * hostinfo: add page to index * rearrange: appendix * venv: add Pipfile * rearrange: contributing * index: remove debugging * rearrange: fix all figure and refs * rearrange: commandtree * fix: cli, openvpn, install headline level * protocols: change headline * firewall: move mss clamping * ip: separate ipv4 and ipv6 * arp: move to static page * igmp: rename multicast page * Update to year 2021
98 lines
2.7 KiB
ReStructuredText
98 lines
2.7 KiB
ReStructuredText
LLDP
|
|
----
|
|
|
|
The Link Layer Discovery Protocol (LLDP) is a vendor-neutral
|
|
link layer protocol in the Internet Protocol Suite used by network devices for
|
|
advertising their identity, capabilities, and neighbors on an IEEE 802 local
|
|
area network, principally wired Ethernet.[1] The protocol is formally referred
|
|
to by the IEEE as Station and Media Access Control Connectivity Discovery
|
|
specified in IEEE 802.1AB and IEEE 802.3-2012 section 6 clause 79.
|
|
|
|
LLDP performs functions similar to several proprietary protocols, such as
|
|
`Cisco Discovery Protocol`_, `Foundry Discovery Protocol`_,
|
|
Nortel Discovery Protocol and Link Layer Topology Discovery.
|
|
|
|
Information gathered
|
|
^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Information gathered with LLDP is stored in the device as a management
|
|
information database (MIB_) and can be queried with the Simple Network
|
|
Management Protocol (SNMP_) as specified in RFC 2922. The topology of an
|
|
LLDP-enabled network can be discovered by crawling the hosts and querying this
|
|
database. Information that may be retrieved include:
|
|
|
|
* System name and description
|
|
* Port name and description
|
|
* VLAN name
|
|
* IP management address
|
|
* System capabilities (switching, routing, etc.)
|
|
* MAC/PHY information
|
|
* MDI power
|
|
* Link aggregation
|
|
|
|
Configuration
|
|
^^^^^^^^^^^^^
|
|
|
|
* Enable service with:
|
|
|
|
:code:`set service lldp`
|
|
|
|
Options
|
|
*******
|
|
|
|
* Configure a Define management-address:
|
|
|
|
:code:`set service lldp management-address <x.x.x.x>`
|
|
|
|
* Define listening interfaces
|
|
|
|
:code:`set service lldp interface <all|interface name>`
|
|
|
|
* LLDPd also implements an SNMP subagent. To Enable SNMP queries of the LLDP
|
|
database:
|
|
|
|
:code:`set service lldp snmp enable`
|
|
|
|
* Enable optional/other protocols
|
|
|
|
:code:`set service lldp legacy-protocols cdp`
|
|
|
|
Supported legacy protocols:
|
|
|
|
* ``cdp`` - Listen for CDP for Cisco routers/switches
|
|
* ``edp`` - Listen for EDP for Extreme routers/switches
|
|
* ``fdp`` - Listen for FDP for Foundry routers/switches
|
|
* ``sonmp`` - Listen for SONMP for Nortel routers/switches
|
|
|
|
|
|
Display neighbors
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
* Display with:
|
|
|
|
``show lldp neighbors``
|
|
|
|
Exemple:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~# show lldp neighbors
|
|
Capability Codes: R - Router, B - Bridge, W - Wlan r - Repeater, S - Station
|
|
D - Docsis, T - Telephone, O - Other
|
|
Device ID Local Proto Cap Platform Port ID
|
|
--------- ----- ----- --- -------- -------
|
|
swA309 eth0 LLDP ? Cisco IOS Software, GigE0/33
|
|
|
|
|
|
* Options:
|
|
|
|
* ``detail`` - Show lldp neighbors detail
|
|
* ``interface`` - Show LLDP for specified interface
|
|
|
|
Troubleshooting
|
|
^^^^^^^^^^^^^^^
|
|
|
|
Use operational command ``show log lldp`` to display logs.
|
|
|
|
.. include:: references.rst
|