mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
135 lines
4.9 KiB
ReStructuredText
135 lines
4.9 KiB
ReStructuredText
.. _static-routing:
|
|
|
|
######
|
|
Static
|
|
######
|
|
|
|
Static routes are manually configured routes, which, in general, cannot be
|
|
updated dynamically from information VyOS learns about the network topology from
|
|
other routing protocols. However, if a link fails, the router will remove
|
|
routes, including static routes, from the :abbr:`RIPB (Routing Information
|
|
Base)` that used this interface to reach the next hop. In general, static
|
|
routes should only be used for very simple network topologies, or to override
|
|
the behavior of a dynamic routing protocol for a small number of routes. The
|
|
collection of all routes the router has learned from its configuration or from
|
|
its dynamic routing protocols is stored in the RIB. Unicast routes are directly
|
|
used to determine the forwarding table used for unicast packet forwarding.
|
|
|
|
Static Routes
|
|
#############
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> next-hop <address>
|
|
|
|
Configure next-hop `<address>` for an IPv4 static route. Multiple static
|
|
routes can be created.
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> next-hop <address> disable
|
|
|
|
Disable this IPv4 static route entry.
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> next-hop <address> distance <distance>
|
|
|
|
Defines next-hop distance for this route, routes with smaller administrative
|
|
distance are elected prior those with a higher distance.
|
|
|
|
Range is 1 to 255, default is 1.
|
|
|
|
.. note:: Routes with a distance of 255 are effectively disabled and not
|
|
installed into the kernel.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> next-hop <address>
|
|
|
|
Configure next-hop `<address>` for an IPv6 static route. Multiple static
|
|
routes can be created.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> next-hop <address> disable
|
|
|
|
Disable this IPv6 static route entry.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> next-hop <address> distance <distance>
|
|
|
|
Defines next-hop distance for this route, routes with smaller administrative
|
|
distance are elected prior those with a higher distance.
|
|
|
|
Range is 1 to 255, default is 1.
|
|
|
|
.. note:: Routes with a distance of 255 are effectively disabled and not
|
|
installed into the kernel.
|
|
|
|
|
|
Interface Routes
|
|
================
|
|
|
|
.. cfgcmd:: set protocols static interface-route <subnet> next-hop-interface <interface>
|
|
|
|
Allows you to configure the next-hop interface for an interface-based IPv4
|
|
static route. `<interface>` will be the next-hop interface where trafic is
|
|
routed for the given `<subnet>`.
|
|
|
|
.. cfgcmd:: set protocols static interface-route <subnet> next-hop-interface <interface> disable
|
|
|
|
Disables interface-based IPv4 static route.
|
|
|
|
.. cfgcmd:: set protocols static interface-route <subnet> next-hop-interface <interface> distance <distance>
|
|
|
|
Defines next-hop distance for this route, routes with smaller administrative
|
|
distance are elected prior those with a higher distance.
|
|
|
|
Range is 1 to 255, default is 1.
|
|
|
|
.. cfgcmd:: set protocols static interface-route6 <subnet> next-hop-interface <interface>
|
|
|
|
Allows you to configure the next-hop interface for an interface-based IPv6
|
|
static route. `<interface>` will be the next-hop interface where trafic is
|
|
routed for the given `<subnet>`.
|
|
|
|
.. cfgcmd:: set protocols static interface-route6 <subnet> next-hop-interface <interface> disable
|
|
|
|
Disables interface-based IPv6 static route.
|
|
|
|
.. cfgcmd:: set protocols static interface-route6 <subnet> next-hop-interface <interface> distance <distance>
|
|
|
|
Defines next-hop distance for this route, routes with smaller administrative
|
|
distance are elected prior those with a higher distance.
|
|
|
|
Range is 1 to 255, default is 1.
|
|
|
|
|
|
Blackhole
|
|
=========
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> blackhole
|
|
|
|
Use this command to configure a "black-hole" route on the router. A
|
|
black-hole route is a route for which the system silently discard packets
|
|
that are matched. This prevents networks leaking out public interfaces, but
|
|
it does not prevent them from being used as a more specific route inside your
|
|
network.
|
|
|
|
.. cfgcmd:: set protocols static route <subnet> blackhole distance <distance>
|
|
|
|
Defines blackhole distance for this route, routes with smaller administrative
|
|
distance are elected prior those with a higher distance.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> blackhole
|
|
|
|
Use this command to configure a "black-hole" route on the router. A
|
|
black-hole route is a route for which the system silently discard packets
|
|
that are matched. This prevents networks leaking out public interfaces, but
|
|
it does not prevent them from being used as a more specific route inside your
|
|
network.
|
|
|
|
.. cfgcmd:: set protocols static route6 <subnet> blackhole distance <distance>
|
|
|
|
Defines blackhole distance for this route, routes with smaller administrative
|
|
distance are elected prior those with a higher distance.
|
|
|
|
|
|
Alternate Routing Tables
|
|
========================
|
|
|
|
TBD
|
|
|
|
Alternate routing tables are used with policy based routing of by utilizing
|
|
:ref:`vrf`.
|