mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
70 lines
2.7 KiB
Plaintext
70 lines
2.7 KiB
Plaintext
.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
|
|
{{ var5 }} {{ var6 }} ipv6 address autoconf
|
|
|
|
:abbr:`SLAAC (Stateless Address Autoconfiguration)` :rfc:`4862`. IPv6 hosts
|
|
can configure themselves automatically when connected to an IPv6 network using
|
|
the Neighbor Discovery Protocol via :abbr:`ICMPv6 (Internet Control Message
|
|
Protocol version 6)` router discovery messages. When first connected to a
|
|
network, a host sends a link-local router solicitation multicast request for
|
|
its configuration parameters; routers respond to such a request with a router
|
|
advertisement packet that contains Internet Layer configuration parameters.
|
|
|
|
.. note:: This method automatically disables IPv6 traffic forwarding on the
|
|
interface in question.
|
|
|
|
Example:
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 address autoconf
|
|
|
|
|
|
.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
|
|
{{ var5 }} {{ var6 }} ipv6 address eui64 <prefix>
|
|
|
|
:abbr:`EUI-64 (64-Bit Extended Unique Identifier)` as specified in
|
|
:rfc:`4291` allows a host to assign iteslf a unique 64-Bit IPv6 address.
|
|
|
|
Example:
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 address eui64 2001:db8:beef::/64
|
|
|
|
.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
|
|
{{ var5 }} {{ var6 }} ipv6 address no-default-link-local
|
|
|
|
Do not assign a link-local IPv6 address to this interface.
|
|
|
|
Example:
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 address no-default-link-local
|
|
|
|
.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
|
|
{{ var5 }} {{ var6 }} ipv6 disable-forwarding
|
|
|
|
Configure interface-specific Host/Router behaviour. If set, the interface will
|
|
switch to host mode and IPv6 forwarding will be disabled on this interface.
|
|
|
|
Example:
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} {{ var5 }} {{ var7 }} ipv6 disable-forwarding
|
|
|
|
.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
|
|
{{ var5 }} {{ var6 }} ipv6 adjust-mss <mss>
|
|
|
|
As Internet wide PMTU discovery rarely works, we sometimes need to clamp our
|
|
TCP MSS value to a specific value. This is a field in the TCP options part of
|
|
a SYN packet. By setting the MSS value, you are telling the remote side
|
|
unequivocally 'do not try to send me packets bigger than this value'.
|
|
|
|
.. note:: This command was introduced in VyOS 1.4 - it was previously called:
|
|
``set firewall options interface <name> adjust-mss6 <value>``
|
|
|
|
.. hint:: MSS value = MTU - 40 (IPv6 header) - 20 (TCP header), resulting in
|
|
1432 bytes on a 1492 byte MTU.
|