mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
282 lines
7.6 KiB
ReStructuredText
282 lines
7.6 KiB
ReStructuredText
.. _ip-commands:
|
|
|
|
***********
|
|
IP commands
|
|
***********
|
|
|
|
|
|
IPv4
|
|
====
|
|
|
|
System configuration commands
|
|
-----------------------------
|
|
|
|
|
|
.. cfgcmd:: set system ip disable-forwarding
|
|
|
|
Use this command to disable IPv4 forwarding on all interfaces.
|
|
|
|
|
|
.. cfgcmd:: set system ip arp table-size <number>
|
|
|
|
Use this command to define the maximum number of entries to keep in
|
|
the ARP cache (1024, 2048, 4096, 8192, 16384, 32768).
|
|
|
|
|
|
.. cfgcmd:: set system ip multipath layer4-hashing
|
|
|
|
Use this command to use Layer 4 information for IPv4 ECMP hashing.
|
|
|
|
|
|
Operational commands
|
|
--------------------
|
|
|
|
|
|
show commands
|
|
^^^^^^^^^^^^^
|
|
|
|
See below the different parameters available for the IPv4 **show** command:
|
|
|
|
.. code-block::
|
|
|
|
vyos@vyos:~$ show ip
|
|
Possible completions:
|
|
access-list Show all IP access-lists
|
|
as-path-access-list
|
|
Show all as-path-access-lists
|
|
bgp Show Border Gateway Protocol (BGP) information
|
|
community-list
|
|
Show IP community-lists
|
|
extcommunity-list
|
|
Show extended IP community-lists
|
|
forwarding Show IP forwarding status
|
|
groups Show IP multicast group membership
|
|
igmp Show IGMP (Internet Group Management Protocol) information
|
|
large-community-list
|
|
Show IP large-community-lists
|
|
multicast Show IP multicast
|
|
ospf Show IPv4 Open Shortest Path First (OSPF) routing information
|
|
pim Show PIM (Protocol Independent Multicast) information
|
|
ports Show IP ports in use by various system services
|
|
prefix-list Show all IP prefix-lists
|
|
protocol Show IP route-maps per protocol
|
|
rip Show Routing Information Protocol (RIP) information
|
|
route Show IP routes
|
|
|
|
|
|
reset commands
|
|
^^^^^^^^^^^^^^
|
|
|
|
And the different IPv4 **reset** commands available:
|
|
|
|
.. code-block::
|
|
|
|
vyos@vyos:~$ reset ip
|
|
Possible completions:
|
|
arp Reset Address Resolution Protocol (ARP) cache
|
|
bgp Clear Border Gateway Protocol (BGP) statistics or status
|
|
igmp IGMP clear commands
|
|
multicast IP multicast routing table
|
|
route Reset IP route
|
|
|
|
|
|
IPv6
|
|
====
|
|
|
|
System configuration commands
|
|
-----------------------------
|
|
|
|
.. cfgcmd:: set system ipv6 disable
|
|
|
|
Use this command to disable assignment of IPv6 addresses on all
|
|
interfaces.
|
|
|
|
|
|
.. cfgcmd:: set system ipv6 disable-forwarding
|
|
|
|
Use this command to disable IPv6 forwarding on all interfaces.
|
|
|
|
|
|
.. cfgcmd:: set system ipv6 neighbor table-size <number>
|
|
|
|
Use this command to define the maximum number of entries to keep in
|
|
the Neighbor cache (1024, 2048, 4096, 8192, 16384, 32768).
|
|
|
|
|
|
.. cfgcmd:: set system ipv6 strict-dad
|
|
|
|
Use this command to disable IPv6 operation on interface when
|
|
Duplicate Address Detection fails on Link-Local address.
|
|
|
|
|
|
.. cfgcmd:: set system ipv6 multipath layer4-hashing
|
|
|
|
Use this command to user Layer 4 information for ECMP hashing.
|
|
|
|
.. cfgcmd:: set system ipv6 blacklist
|
|
|
|
Use this command to prevent the IPv6 kernel module from being loaded.
|
|
|
|
|
|
|
|
Operational commands
|
|
--------------------
|
|
|
|
Show commands
|
|
^^^^^^^^^^^^^
|
|
|
|
|
|
.. opcmd:: show ipv6 neighbors
|
|
|
|
Use this command to show IPv6 Neighbor Discovery Protocol information.
|
|
|
|
|
|
.. opcmd:: show ipv6 groups
|
|
|
|
Use this command to show IPv6 multicast group membership.
|
|
|
|
|
|
.. opcmd:: show ipv6 forwarding
|
|
|
|
Use this command to show IPv6 forwarding status.
|
|
|
|
.. opcmd:: show ipv6 route
|
|
|
|
Use this command to show IPv6 routes.
|
|
|
|
|
|
Check the many parameters available for the `show ipv6 route` command:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show ipv6 route
|
|
Possible completions:
|
|
<Enter> Execute the current command
|
|
<X:X::X:X> Show IPv6 routes of given address or prefix
|
|
<X:X::X:X/M>
|
|
bgp Show IPv6 BGP routes
|
|
cache Show kernel IPv6 route cache
|
|
connected Show IPv6 connected routes
|
|
forward Show kernel IPv6 route table
|
|
isis Show IPv6 ISIS routes
|
|
kernel Show IPv6 kernel routes
|
|
ospfv3 Show IPv6 OSPF6 routes
|
|
ripng Show IPv6 RIPNG routes
|
|
static Show IPv6 static routes
|
|
summary Show IPv6 routes summary
|
|
table Show IP routes in policy table
|
|
|
|
|
|
.. opcmd:: show ipv6 prefix-list
|
|
|
|
Use this command to show all IPv6 prefix lists
|
|
|
|
There are different parameters for getting prefix-list information:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show ipv6 prefix-list
|
|
Possible completions:
|
|
<Enter> Execute the current command
|
|
<WORD> Show specified IPv6 prefix-list
|
|
detail Show detail of IPv6 prefix-lists
|
|
summary Show summary of IPv6 prefix-lists
|
|
|
|
.. opcmd:: show ipv6 access-list
|
|
|
|
Use this command to show all IPv6 access lists
|
|
|
|
You can also specify which IPv6 access-list should be shown:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show ipv6 access-list
|
|
Possible completions:
|
|
<Enter> Execute the current command
|
|
<text> Show specified IPv6 access-list
|
|
|
|
|
|
|
|
.. opcmd:: show ipv6 bgp
|
|
|
|
Use this command to show IPv6 Border Gateway Protocol information.
|
|
|
|
|
|
In addition, you can specify many other parameters to get BGP
|
|
information:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show ipv6 bgp
|
|
Possible completions:
|
|
<Enter> Execute the current command
|
|
<X:X::X:X> Show BGP information for given address or prefix
|
|
<X:X::X:X/M>
|
|
community Show routes matching the communities
|
|
community-list
|
|
Show routes matching the community-list
|
|
filter-list Show routes conforming to the filter-list
|
|
large-community
|
|
Show routes matching the large-community-list
|
|
large-community-list
|
|
neighbors Show detailed information on TCP and BGP neighbor connections
|
|
prefix-list Show routes matching the prefix-list
|
|
regexp Show routes matching the AS path regular expression
|
|
summary Show summary of BGP neighbor status
|
|
|
|
|
|
|
|
.. opcmd:: show ipv6 ospfv3
|
|
|
|
Use this command to get information about OSPFv3.
|
|
|
|
You can get more specific OSPFv3 information by using the parameters
|
|
shown below:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show ipv6 ospfv3
|
|
Possible completions:
|
|
<Enter> Execute the current command
|
|
area Show OSPFv3 spf-tree information
|
|
border-routers
|
|
Show OSPFv3 border-router (ABR and ASBR) information
|
|
database Show OSPFv3 Link state database information
|
|
interface Show OSPFv3 interface information
|
|
linkstate Show OSPFv3 linkstate routing information
|
|
neighbor Show OSPFv3 neighbor information
|
|
redistribute Show OSPFv3 redistribute External information
|
|
route Show OSPFv3 routing table information
|
|
|
|
.. opcmd:: show ipv6 ripng
|
|
|
|
Use this command to get information about the RIPNG protocol
|
|
|
|
.. opcmd:: show ipv6 ripng status
|
|
|
|
Use this command to show the status of the RIPNG protocol
|
|
|
|
|
|
|
|
Reset commands
|
|
^^^^^^^^^^^^^^
|
|
|
|
.. opcmd:: reset ipv6 bgp <address>
|
|
|
|
Use this command to clear Border Gateway Protocol statistics or
|
|
status.
|
|
|
|
|
|
.. opcmd:: reset ipv6 neighbors <address | interface>
|
|
|
|
Use this command to reset IPv6 Neighbor Discovery Protocol cache for
|
|
an address or interface.
|
|
|
|
.. opcmd:: reset ipv6 route cache
|
|
|
|
Use this command to flush the kernel IPv6 route cache.
|
|
An address can be added to flush it only for that route.
|
|
|
|
|
|
|