mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
70 lines
2.6 KiB
ReStructuredText
70 lines
2.6 KiB
ReStructuredText
.. _vlan-interface:
|
|
|
|
VLAN (802.1q)
|
|
-------------
|
|
|
|
IEEE 802.1q, often referred to as Dot1q, is the networking standard that
|
|
supports virtual LANs (VLANs) on an IEEE 802.3 Ethernet network. The
|
|
standard defines a system of VLAN tagging for Ethernet frames and the
|
|
accompanying procedures to be used by bridges and switches in handling
|
|
such frames. The standard also contains provisions for a quality-of-service
|
|
prioritization scheme commonly known as IEEE 802.1p and defines the Generic
|
|
Attribute Registration Protocol.
|
|
|
|
Portions of the network which are VLAN-aware (i.e., IEEE 802.1q conformant)
|
|
can include VLAN tags. When a frame enters the VLAN-aware portion of the
|
|
network, a tag is added to represent the VLAN membership. Each frame must
|
|
be distinguishable as being within exactly one VLAN. A frame in the
|
|
VLAN-aware portion of the network that does not contain a VLAN tag is
|
|
assumed to be flowing on the native VLAN.
|
|
|
|
The standard was developed by IEEE 802.1, a working group of the IEEE 802
|
|
standards committee, and continues to be actively revised. One of the
|
|
notable revisions is 802.1Q-2014 which incorporated IEEE 802.1aq (Shortest
|
|
Path Bridging) and much of the IEEE 802.1d standard.
|
|
|
|
802.1a VLAN interfaces are represented as virtual sub-interfaces in VyOS. The
|
|
term used for this is ``vif``. Configuration of a tagged sub-interface is
|
|
accomplished using the configuration command:
|
|
``set interfaces ethernet <name> vif <vlan-id>``
|
|
|
|
To assign a vif 100 using the VLAN 100 tag to physical interface eth1 use:
|
|
|
|
.. code-block:: sh
|
|
|
|
set interfaces ethernet eth1 vif 100 description 'VLAN 100'
|
|
set interfaces ethernet eth1 vif 100 address '192.168.100.1/24'
|
|
set interfaces ethernet eth1 vif 100 address '2001:db8:100::1/64'
|
|
|
|
Resulting in:
|
|
|
|
.. code-block:: sh
|
|
|
|
ethernet eth1 {
|
|
address 192.168.100.1/24
|
|
address 2001:db8:100::1/64
|
|
description INSIDE
|
|
duplex auto
|
|
hw-id 00:0c:29:44:3b:19
|
|
smp_affinity auto
|
|
speed auto
|
|
vif 100 {
|
|
address 192.168.100.1/24
|
|
description "VLAN 100"
|
|
}
|
|
}
|
|
|
|
VLAN interfaces are shown as `<name>.<vlan-id>`, e.g. `eth1.100`:
|
|
|
|
.. code-block:: sh
|
|
|
|
vyos@vyos:~$ show interfaces
|
|
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
|
|
Interface IP Address S/L Description
|
|
--------- ---------- --- -----------
|
|
eth0 172.16.51.129/24 u/u OUTSIDE
|
|
eth1 192.168.0.1/24 u/u INSIDE
|
|
eth1.100 192.168.100.1/24 u/u VLAN 100
|
|
lo 127.0.0.1/8 u/u
|
|
::1/128
|