mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
143 lines
5.0 KiB
ReStructuredText
143 lines
5.0 KiB
ReStructuredText
.. _lldp:
|
|
|
|
####
|
|
LLDP
|
|
####
|
|
|
|
:abbr:`LLDP (Link Layer Discovery Protocol)` is a vendor-neutral link layer
|
|
protocol in the Internet Protocol Suite used by network devices for advertising
|
|
their identity, capabilities, and neighbors on an IEEE 802 local area network,
|
|
principally wired Ethernet. The protocol is formally referred to by the IEEE
|
|
as Station and Media Access Control Connectivity Discovery specified in IEEE
|
|
802.1AB and IEEE 802.3-2012 section 6 clause 79.
|
|
|
|
LLDP performs functions similar to several proprietary protocols, such as
|
|
:abbr:`CDP (Cisco Discovery Protocol)`,
|
|
:abbr:`FDP (Foundry Discovery Protocol)`,
|
|
:abbr:`NDP (Nortel Discovery Protocol)` and :abbr:`LLTD (Link Layer Topology
|
|
Discovery)`.
|
|
|
|
Information gathered with LLDP is stored in the device as a :abbr:`MIB
|
|
(Management Information Database)` and can be queried with :abbr:`SNMP (Simple
|
|
Network Management Protocol)` as specified in :rfc:`2922`. The topology of an
|
|
LLDP-enabled network can be discovered by crawling the hosts and querying this
|
|
database. Information that may be retrieved include:
|
|
|
|
* System Name and Description
|
|
* Port name and description
|
|
* VLAN name
|
|
* IP management address
|
|
* System capabilities (switching, routing, etc.)
|
|
* MAC/PHY information
|
|
* MDI power
|
|
* Link aggregation
|
|
|
|
Configuration
|
|
=============
|
|
|
|
.. cfgcmd:: set service lldp
|
|
|
|
Enable LLDP service
|
|
|
|
.. cfgcmd:: set service lldp management-address <address>
|
|
|
|
Define IPv4/IPv6 management address transmitted via LLDP. Multiple addresses
|
|
can be defined. Only addresses connected to the system will be transmitted.
|
|
|
|
.. cfgcmd:: set service lldp interface <interface>
|
|
|
|
Enable transmission of LLDP information on given `<interface>`. You can also
|
|
say ``all`` here so LLDP is turned on on every interface.
|
|
|
|
.. cfgcmd:: set service lldp interface <interface> disable
|
|
|
|
Disable transmit of LLDP frames on given `<interface>`. Useful to exclude
|
|
certain interfaces from LLDP when ``all`` have been enabled.
|
|
|
|
.. cfgcmd:: set service lldp snmp
|
|
|
|
Enable SNMP queries of the LLDP database
|
|
|
|
.. cfgcmd:: set service lldp legacy-protocols <cdp|edp|fdp|sonmp>
|
|
|
|
Enable given legacy protocol on this LLDP instance. Legacy protocols include:
|
|
|
|
* ``cdp`` - Listen for CDP for Cisco routers/switches
|
|
* ``edp`` - Listen for EDP for Extreme routers/switches
|
|
* ``fdp`` - Listen for FDP for Foundry routers/switches
|
|
* ``sonmp`` - Listen for SONMP for Nortel routers/switches
|
|
|
|
Operation
|
|
=========
|
|
|
|
.. opcmd:: show lldp neighbors
|
|
|
|
Displays information about all neighbors discovered via LLDP.
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show lldp neighbors
|
|
Capability Codes: R - Router, B - Bridge, W - Wlan r - Repeater, S - Station
|
|
D - Docsis, T - Telephone, O - Other
|
|
|
|
Device ID Local Proto Cap Platform Port ID
|
|
--------- ----- ----- --- -------- -------
|
|
BR2.vyos.net eth0 LLDP R VyOS 1.2.4 eth1
|
|
BR3.vyos.net eth0 LLDP RB VyOS 1.2.4 eth2
|
|
SW1.vyos.net eth0 LLDP B Cisco IOS Software GigabitEthernet0/6
|
|
|
|
.. opcmd:: show lldp neighbors detail
|
|
|
|
Get detailed information about LLDP neighbors.
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show lldp neighbors detail
|
|
-------------------------------------------------------------------------------
|
|
LLDP neighbors:
|
|
-------------------------------------------------------------------------------
|
|
Interface: eth0, via: LLDP, RID: 28, Time: 0 day, 00:24:33
|
|
Chassis:
|
|
ChassisID: mac 00:53:00:01:02:c9
|
|
SysName: BR2.vyos.net
|
|
SysDescr: VyOS 1.3-rolling-201912230217
|
|
MgmtIP: 192.0.2.1
|
|
MgmtIP: 2001:db8::ffff
|
|
Capability: Bridge, on
|
|
Capability: Router, on
|
|
Capability: Wlan, off
|
|
Capability: Station, off
|
|
Port:
|
|
PortID: mac 00:53:00:01:02:c9
|
|
PortDescr: eth0
|
|
TTL: 120
|
|
PMD autoneg: supported: no, enabled: no
|
|
MAU oper type: 10GigBaseCX4 - X copper over 8 pair 100-Ohm balanced cable
|
|
VLAN: 201 eth0.201
|
|
VLAN: 205 eth0.205
|
|
LLDP-MED:
|
|
Device Type: Network Connectivity Device
|
|
Capability: Capabilities, yes
|
|
Capability: Policy, yes
|
|
Capability: Location, yes
|
|
Capability: MDI/PSE, yes
|
|
Capability: MDI/PD, yes
|
|
Capability: Inventory, yes
|
|
Inventory:
|
|
Hardware Revision: None
|
|
Software Revision: 4.19.89-amd64-vyos
|
|
Firmware Revision: 6.00
|
|
Serial Number: VMware-42 1d 83 b9 fe c1 bd b2-7
|
|
Manufacturer: VMware, Inc.
|
|
Model: VMware Virtual Platform
|
|
Asset ID: No Asset Tag
|
|
-------------------------------------------------------------------------------
|
|
|
|
.. opcmd:: show lldp neighbors interface <interface>
|
|
|
|
Show LLDP neighbors connected via interface `<interface>`.
|
|
|
|
.. opcmd:: show log lldp
|
|
|
|
Used for troubleshooting.
|