mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-11-04 00:02:05 +01:00
100 lines
3.1 KiB
ReStructuredText
100 lines
3.1 KiB
ReStructuredText
.. _routing-pbr:
|
|
|
|
PBR
|
|
---
|
|
|
|
:abbr:`PBR (Policy-Based Routing)` allowing traffic to be assigned to different
|
|
routing tables. Traffic can be matched using standard 5-tuple matching (source
|
|
address, destination address, protocol, source port, destination port).
|
|
|
|
Transparent Proxy
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
The following example will show how VyOS can be used to redirect web traffic to
|
|
an external transparent proxy:
|
|
|
|
.. code-block:: none
|
|
|
|
set policy route FILTER-WEB rule 1000 destination port 80
|
|
set policy route FILTER-WEB rule 1000 protocol tcp
|
|
set policy route FILTER-WEB rule 1000 set table 100
|
|
|
|
This creates a route policy called FILTER-WEB with one rule to set the routing
|
|
table for matching traffic (TCP port 80) to table ID 100 instead of the
|
|
default routing table.
|
|
|
|
To create routing table 100 and add a new default gateway to be used by
|
|
traffic matching our route policy:
|
|
|
|
.. code-block:: none
|
|
|
|
set protocols static table 100 route 0.0.0.0/0 next-hop 10.255.0.2
|
|
|
|
This can be confirmed using the show ip route table 100 operational command.
|
|
|
|
Finally, to apply the policy route to ingress traffic on our LAN interface,
|
|
we use:
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces ethernet eth1 policy route FILTER-WEB
|
|
|
|
|
|
Multiple Uplinks
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
VyOS Policy-Based Routing (PBR) works by matching source IP address ranges and
|
|
forwarding the traffic using different routing tables.
|
|
|
|
Routing tables that will be used in this example are:
|
|
|
|
* ``table 10`` Routing tabled used for VLAN 10 (192.168.188.0/24)
|
|
* ``table 11`` Routing tabled used for VLAN 11 (192.168.189.0/24)
|
|
* ``main`` Routing table used by VyOS and other interfaces not paritipating in
|
|
PBR
|
|
|
|
.. figure:: ../_static/images/pbr_example_1.png
|
|
:scale: 80 %
|
|
:alt: PBR multiple uplinks
|
|
|
|
Policy-Based Routing with multiple ISP uplinks
|
|
(source ./draw.io/pbr_example_1.drawio)
|
|
|
|
Add default routes for routing ``table 10`` and ``table 11``
|
|
|
|
.. code-block:: none
|
|
|
|
set protocols static table 10 route 0.0.0.0/0 next-hop 192.0.1.1
|
|
set protocols static table 11 route 0.0.0.0/0 next-hop 192.0.2.2
|
|
|
|
Add policy route matching VLAN source addresses
|
|
|
|
.. code-block:: none
|
|
|
|
set policy route PBR rule 20 set table '10'
|
|
set policy route PBR rule 20 description 'Route VLAN10 traffic to table 10'
|
|
set policy route PBR rule 20 source address '192.168.188.0/24'
|
|
|
|
set policy route PBR rule 30 set table '11'
|
|
set policy route PBR rule 30 description 'Route VLAN11 traffic to table 11'
|
|
set policy route PBR rule 30 source address '192.168.189.0/24'
|
|
|
|
Apply routing policy to **inbound** direction of out VLAN interfaces
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces ethernet eth0 vif 10 policy route 'PBR'
|
|
set interfaces ethernet eth0 vif 11 policy route 'PBR'
|
|
|
|
|
|
**OPTIONAL:** Exclude Inter-VLAN traffic (between VLAN10 and VLAN11) from PBR
|
|
|
|
.. code-block:: none
|
|
|
|
set policy route PBR rule 10 description 'VLAN10 <-> VLAN11 shortcut'
|
|
set policy route PBR rule 10 destination address '192.168.188.0/24'
|
|
set policy route PBR rule 10 destination address '192.168.189.0/24'
|
|
set policy route PBR rule 10 set table 'main'
|
|
|
|
.. note:: Allows the VLAN10 and VLAN20 hosts to communicate with each other
|
|
using the main routing table. |