mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-11-04 00:02:05 +01:00
108 lines
3.5 KiB
ReStructuredText
108 lines
3.5 KiB
ReStructuredText
##
|
|
IP
|
|
##
|
|
|
|
System configuration commands
|
|
-----------------------------
|
|
|
|
.. cfgcmd:: set system ip disable-forwarding
|
|
|
|
Use this command to disable IPv4 forwarding on all interfaces.
|
|
|
|
.. cfgcmd:: set system ip disable-directed-broadcast
|
|
|
|
Use this command to disable IPv4 directed broadcast forwarding on all
|
|
interfaces.
|
|
|
|
If set, IPv4 directed broadcast forwarding will be completely disabled
|
|
regardless of whether per-interface directed broadcast forwarding is
|
|
enabled or not.
|
|
|
|
.. cfgcmd:: set system ip arp table-size <number>
|
|
|
|
Use this command to define the maximum number of entries to keep in
|
|
the ARP cache (1024, 2048, 4096, 8192, 16384, 32768).
|
|
|
|
.. cfgcmd:: set system ip multipath layer4-hashing
|
|
|
|
Use this command to use Layer 4 information for IPv4 ECMP hashing.
|
|
|
|
Zebra/Kernel route filtering
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
Zebra supports prefix-lists and Route Mapss to match routes received from
|
|
other FRR components. The permit/deny facilities provided by these commands
|
|
can be used to filter which routes zebra will install in the kernel.
|
|
|
|
.. cfgcmd:: set system ip protocol <protocol> route-map <route-map>
|
|
|
|
Apply a route-map filter to routes for the specified protocol. The following
|
|
protocols can be used: any, babel, bgp, connected, eigrp, isis, kernel,
|
|
ospf, rip, static, table
|
|
|
|
.. note:: If you choose any as the option that will cause all protocols that
|
|
are sending routes to zebra.
|
|
|
|
Nexthop Tracking
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
Nexthop tracking resolve nexthops via the default route by default. This is enabled
|
|
by default for a traditional profile of FRR which we use. It and can be disabled if
|
|
you do not wan't to e.g. allow BGP to peer across the default route.
|
|
|
|
.. cfgcmd:: set system ip nht no-resolve-via-default
|
|
|
|
Do not allow IPv4 nexthop tracking to resolve via the default route. This
|
|
parameter is configured per-VRF, so the command is also available in the VRF
|
|
subnode.
|
|
|
|
Operational commands
|
|
--------------------
|
|
|
|
show commands
|
|
^^^^^^^^^^^^^
|
|
|
|
See below the different parameters available for the IPv4 **show** command:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show ip
|
|
Possible completions:
|
|
access-list Show all IP access-lists
|
|
as-path-access-list
|
|
Show all as-path-access-lists
|
|
bgp Show Border Gateway Protocol (BGP) information
|
|
community-list
|
|
Show IP community-lists
|
|
extcommunity-list
|
|
Show extended IP community-lists
|
|
forwarding Show IP forwarding status
|
|
groups Show IP multicast group membership
|
|
igmp Show IGMP (Internet Group Management Protocol) information
|
|
large-community-list
|
|
Show IP large-community-lists
|
|
multicast Show IP multicast
|
|
ospf Show IPv4 Open Shortest Path First (OSPF) routing information
|
|
pim Show PIM (Protocol Independent Multicast) information
|
|
ports Show IP ports in use by various system services
|
|
prefix-list Show all IP prefix-lists
|
|
protocol Show IP route-maps per protocol
|
|
rip Show Routing Information Protocol (RIP) information
|
|
route Show IP routes
|
|
|
|
|
|
reset commands
|
|
^^^^^^^^^^^^^^
|
|
|
|
And the different IPv4 **reset** commands available:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ reset ip
|
|
Possible completions:
|
|
arp Reset Address Resolution Protocol (ARP) cache
|
|
bgp Clear Border Gateway Protocol (BGP) statistics or status
|
|
igmp IGMP clear commands
|
|
multicast IP multicast routing table
|
|
route Reset IP route
|