mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-11-04 00:02:05 +01:00
105 lines
3.3 KiB
ReStructuredText
105 lines
3.3 KiB
ReStructuredText
Bridging
|
|
--------
|
|
|
|
Interfaces in VyOS can be bridged together to provide software switching of
|
|
Layer-2 traffic.
|
|
|
|
A bridge is created when a bridge interface is defined. In the example below
|
|
we will be creating a bridge for VLAN 100 and assigning a VIF to the bridge.
|
|
|
|
.. code-block:: sh
|
|
|
|
set interfaces bridge 'br100'
|
|
set interfaces ethernet eth1 vif 100 bridge-group bridge br100
|
|
|
|
Interfaces assigned to a bridge-group do not have address configuration. An IP
|
|
address can be assigned to the bridge interface itself, however, like any
|
|
normal interface.
|
|
|
|
.. code-block:: sh
|
|
|
|
set interfaces bridge br100 address '192.168.100.1/24'
|
|
set interfaces bridge br100 address '2001:db8:100::1/64'
|
|
|
|
Example Result:
|
|
|
|
.. code-block:: sh
|
|
|
|
bridge br100 {
|
|
address 192.168.100.1/24
|
|
address 2001:db8:100::1/64
|
|
}
|
|
[...]
|
|
ethernet eth1 {
|
|
[...]
|
|
vif 100 {
|
|
bridge-group {
|
|
bridge br100
|
|
}
|
|
}
|
|
}
|
|
|
|
In addition to normal IP interface configuration, bridge interfaces support
|
|
Spanning-Tree Protocol. STP is disabled by default.
|
|
|
|
.. note:: Please use caution when introducing spanning-tree protocol on a
|
|
network as it may result in topology changes.
|
|
|
|
To enable spanning-tree use the
|
|
`set interfaces bridge <name> stp true` command:
|
|
|
|
.. code-block:: sh
|
|
|
|
set interfaces bridge br100 stp true
|
|
|
|
STP `priority`, `forwarding-delay`, `hello-time`, and `max-age` can be
|
|
configured for the bridge-group. The MAC aging time can also be configured
|
|
using the `aging` directive.
|
|
|
|
For member interfaces, the bridge-group `priority` and `cost` can be
|
|
configured.
|
|
|
|
The `show bridge` operational command can be used to display configured
|
|
bridges:
|
|
|
|
.. code-block:: sh
|
|
|
|
vyos@vyos:~$ show bridge
|
|
bridge name bridge id STP enabled interfaces
|
|
br100 0000.000c29443b19 yes eth1.100
|
|
|
|
If spanning-tree is enabled, the `show bridge <name> spanning-tree` command
|
|
can be used to show STP configuration:
|
|
|
|
.. code-block:: sh
|
|
|
|
vyos@vyos:~$ show bridge br100 spanning-tree
|
|
br100
|
|
bridge id 0000.000c29443b19
|
|
designated root 0000.000c29443b19
|
|
root port 0 path cost 0
|
|
max age 20.00 bridge max age 20.00
|
|
hello time 2.00 bridge hello time 2.00
|
|
forward delay 15.00 bridge forward delay 15.00
|
|
ageing time 300.00
|
|
hello timer 0.47 tcn timer 0.00
|
|
topology change timer 0.00 gc timer 64.63
|
|
flags
|
|
|
|
eth1.100 (1)
|
|
port id 8001 state forwarding
|
|
designated root 0000.000c29443b19 path cost 4
|
|
designated bridge 0000.000c29443b19 message age timer 0.00
|
|
designated port 8001 forward delay timer 0.00
|
|
designated cost 0 hold timer 0.00
|
|
flags
|
|
|
|
The MAC address-table for a bridge can be displayed using the
|
|
`show bridge <name> macs` command:
|
|
|
|
.. code-block:: sh
|
|
|
|
vyos@vyos:~$ show bridge br100 macs
|
|
port no mac addr is local? ageing timer
|
|
1 00:0c:29:44:3b:19 yes 0.00
|