mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
296 lines
9.1 KiB
ReStructuredText
296 lines
9.1 KiB
ReStructuredText
.. _bridge-interface:
|
|
|
|
######
|
|
Bridge
|
|
######
|
|
|
|
A Bridge is a way to connect two Ethernet segments together in a
|
|
protocol independent way. Packets are forwarded based on Ethernet
|
|
address, rather than IP address (like a router). Since forwarding is
|
|
done at Layer 2, all protocols can go transparently through a bridge.
|
|
The Linux bridge code implements a subset of the ANSI/IEEE 802.1d
|
|
standard.
|
|
|
|
.. note:: Spanning Tree Protocol is not enabled by default in VyOS.
|
|
:ref:`stp` can be easily enabled if needed.
|
|
|
|
*************
|
|
Configuration
|
|
*************
|
|
|
|
Common interface configuration
|
|
==============================
|
|
|
|
.. cmdinclude:: /_include/interface-common-with-dhcp.txt
|
|
:var0: bridge
|
|
:var1: br0
|
|
|
|
Member Interfaces
|
|
=================
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> member interface <member>
|
|
|
|
Assign `<member>` interface to bridge `<interface>`. A completion
|
|
helper will help you with all allowed interfaces which can be
|
|
bridged. This includes :ref:`ethernet-interface`,
|
|
:ref:`bond-interface`, :ref:`l2tpv3-interface`, :ref:`openvpn`,
|
|
:ref:`vxlan-interface`, :ref:`wireless-interface`,
|
|
:ref:`tunnel-interface` and :ref:`geneve-interface`.
|
|
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> member interface <member>
|
|
priority <priority>
|
|
|
|
Configure individual bridge port `<priority>`.
|
|
|
|
Each bridge has a relative priority and cost. Each interface is
|
|
associated with a port (number) in the STP code. Each has a priority
|
|
and a cost, that is used to decide which is the shortest path to
|
|
forward a packet. The lowest cost path is always used unless the
|
|
other path is down. If you have multiple bridges and interfaces then
|
|
you may need to adjust the priorities to achieve optimium
|
|
performance.
|
|
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> member interface <member>
|
|
cost <cost>
|
|
|
|
Path `<cost>` value for Spanning Tree Protocol. Each interface in a
|
|
bridge could have a different speed and this value is used when
|
|
deciding which link to use. Faster interfaces should have lower
|
|
costs.
|
|
|
|
Bridge Options
|
|
==============
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> aging <time>
|
|
|
|
MAC address aging `<time`> in seconds (default: 300).
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> max-age <time>
|
|
|
|
Bridge maximum aging `<time>` in seconds (default: 20).
|
|
|
|
If a another bridge in the spanning tree does not send out a hello
|
|
packet for a long period of time, it is assumed to be dead.
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> igmp querier
|
|
|
|
Enable IGMP querier
|
|
|
|
.. _stp:
|
|
|
|
STP Parameter
|
|
-------------
|
|
|
|
:abbr:`STP (Spanning Tree Protocol)` is a network protocol that builds a
|
|
loop-free logical topology for Ethernet networks. The basic function of
|
|
STP is to prevent bridge loops and the broadcast radiation that results
|
|
from them. Spanning tree also allows a network design to include backup
|
|
links providing fault tolerance if an active link fails.
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> stp
|
|
|
|
Enable spanning tree protocol. STP is disabled by default.
|
|
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> forwarding-delay <delay>
|
|
|
|
Spanning Tree Protocol forwarding `<delay>` in seconds (default: 15).
|
|
|
|
Forwarding delay time is the time spent in each of the Listening and
|
|
Learning states before the Forwarding state is entered. This delay is
|
|
so that when a new bridge comes onto a busy network it looks at some
|
|
traffic before participating.
|
|
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> hello-time <interval>
|
|
|
|
Spanning Tree Protocol hello advertisement `<interval>` in seconds
|
|
(default: 2).
|
|
|
|
Periodically, a hello packet is sent out by the Root Bridge and the
|
|
Designated Bridges. Hello packets are used to communicate information
|
|
about the topology throughout the entire Bridged Local Area Network.
|
|
|
|
VLAN
|
|
====
|
|
|
|
.. cmdinclude:: /_include/interface-vlan-8021q.txt
|
|
:var0: bridge
|
|
:var1: br0
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> member interface <member>
|
|
native-vlan <vlan-id>
|
|
|
|
Set the native VLAN ID flag of the interface. When a data packet without a
|
|
VLAN tag enters the port, the data packet will be forced to add a tag of a
|
|
specific vlan id. When the vlan id flag flows out, the tag of the vlan id
|
|
will be stripped
|
|
|
|
Example: Set `eth0` member port to be native VLAN 2
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces bridge br1 member interface eth0 native-vlan 2
|
|
|
|
.. cfgcmd:: set interfaces bridge <interface> member interface <member>
|
|
allowed-vlan <vlan-id>
|
|
|
|
Allows specific VLAN IDs to pass through the bridge member interface. This
|
|
can either be an individual VLAN id or a range of VLAN ids delimited by a
|
|
hyphen.
|
|
|
|
Example: Set `eth0` member port to be allowed VLAN 4
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces bridge br1 member interface eth0 allowed-vlan 4
|
|
|
|
Example: Set `eth0` member port to be allowed VLAN 6-8
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces bridge br1 member interface eth0 allowed-vlan 6-8
|
|
|
|
Port Mirror (SPAN)
|
|
==================
|
|
.. cmdinclude:: ../../_include/interface-mirror.txt
|
|
:var0: bridge
|
|
:var1: br1
|
|
:var2: eth3
|
|
|
|
*******
|
|
Example
|
|
*******
|
|
|
|
Creating a bridge interface is very simple. In this example we will
|
|
have:
|
|
|
|
* A bridge named `br100`
|
|
* Member interfaces `eth1` and VLAN 10 on interface `eth2`
|
|
* Enable STP
|
|
* Bridge answers on IP address 192.0.2.1/24 and 2001:db8::ffff/64
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces bridge br100 address 192.0.2.1/24
|
|
set interfaces bridge br100 address 2001:db8::ffff/64
|
|
set interfaces bridge br100 member interface eth1
|
|
set interfaces bridge br100 member interface eth2.10
|
|
set interfaces bridge br100 stp
|
|
|
|
This results in the active configuration:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos# show interfaces bridge br100
|
|
address 192.0.2.1/24
|
|
address 2001:db8::ffff/64
|
|
member {
|
|
interface eth1 {
|
|
}
|
|
interface eth2.10 {
|
|
}
|
|
}
|
|
stp
|
|
|
|
*******
|
|
Example
|
|
*******
|
|
|
|
An example of creating a VLAN-aware bridge is as follows:
|
|
|
|
* A bridge named `br100`
|
|
* The member interface `eth1` is a trunk that allows VLAN 10 to pass
|
|
* VLAN 10 on member interface `eth2` (ACCESS mode)
|
|
* Enable STP
|
|
* Bridge answers on IP address 192.0.2.1/24 and 2001:db8::ffff/64
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces bridge br100 member interface eth1 allowed-vlan 10
|
|
set interfaces bridge br100 member interface eth2 native-vlan 10
|
|
set interfaces bridge br100 vif 10 address 192.0.2.1/24
|
|
set interfaces bridge br100 vif 10 address 2001:db8::ffff/64
|
|
set interfaces bridge br100 stp
|
|
|
|
This results in the active configuration:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos# show interfaces bridge br100
|
|
member {
|
|
interface eth1 {
|
|
allowed-vlan 10
|
|
}
|
|
interface eth2 {
|
|
native-vlan 10
|
|
}
|
|
}
|
|
stp
|
|
vif 10 {
|
|
address 192.0.2.1/24
|
|
address 2001:db8::ffff/64
|
|
}
|
|
|
|
*******
|
|
Example
|
|
*******
|
|
|
|
.. opcmd:: show bridge
|
|
|
|
The `show bridge` operational command can be used to display
|
|
configured bridges:
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show bridge
|
|
bridge name bridge id STP enabled interfaces
|
|
br100 8000.0050569d11df yes eth1
|
|
eth2.10
|
|
|
|
.. opcmd:: show bridge <name> spanning-tree
|
|
|
|
Show bridge `<name>` STP configuration.
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show bridge br100 spanning-tree
|
|
br100
|
|
bridge id 8000.0050569d11df
|
|
designated root 8000.0050569d11df
|
|
root port 0 path cost 0
|
|
max age 20.00 bridge max age 20.00
|
|
hello time 2.00 bridge hello time 2.00
|
|
forward delay 14.00 bridge forward delay 14.00
|
|
ageing time 300.00
|
|
hello timer 0.06 tcn timer 0.00
|
|
topology change timer 0.00 gc timer 242.02
|
|
flags
|
|
|
|
eth1 (1)
|
|
port id 8001 state disabled
|
|
designated root 8000.0050569d11df path cost 100
|
|
designated bridge 8000.0050569d11df message age timer 0.00
|
|
designated port 8001 forward delay timer 0.00
|
|
designated cost 0 hold timer 0.00
|
|
flags
|
|
|
|
eth2.10 (2)
|
|
port id 8002 state disabled
|
|
designated root 8000.0050569d11df path cost 100
|
|
designated bridge 8000.0050569d11df message age timer 0.00
|
|
designated port 8002 forward delay timer 0.00
|
|
designated cost 0 hold timer 0.00
|
|
|
|
.. opcmd: show bridge <name> macs
|
|
|
|
Show bridge Media Access Control (MAC) address table
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show bridge br100 macs
|
|
port no mac addr is local? ageing timer
|
|
1 00:53:29:44:3b:19 yes 0.00
|