mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
237 lines
8.0 KiB
ReStructuredText
237 lines
8.0 KiB
ReStructuredText
.. _ethernet-interface:
|
|
|
|
########
|
|
Ethernet
|
|
########
|
|
|
|
Configuration
|
|
#############
|
|
|
|
Address
|
|
-------
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> address <address | dhcp | dhcpv6>
|
|
|
|
Configure interface `<interface>` with one or more interface addresses.
|
|
|
|
* **address** can be specified multiple times as IPv4 and/or IPv6 address,
|
|
e.g. 192.0.2.1/24 and/or 2001:db8::1/64
|
|
* **dhcp** interface address is received by DHCP from a DHCP server on this
|
|
segment.
|
|
* **dhcpv6** interface address is received by DHCPv6 from a DHCPv6 server on
|
|
this segment.
|
|
|
|
Example:
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces ethernet eth0 address 192.0.2.1/24
|
|
set interfaces ethernet eth0 address 192.0.2.2/24
|
|
set interfaces ethernet eth0 address 2001:db8::ffff/64
|
|
set interfaces ethernet eth0 address 2001:db8:100::ffff/64
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> ipv6 address autoconf
|
|
|
|
:abbr:`SLAAC (Stateless Address Autoconfiguration)`
|
|
:rfc:`4862`. IPv6 hosts can configure themselves automatically when connected
|
|
to an IPv6 network using the Neighbor Discovery Protocol via :abbr:`ICMPv6
|
|
(Internet Control Message Protocol version 6)` router discovery messages.
|
|
When first connected to a network, a host sends a link-local router
|
|
solicitation multicast request for its configuration parameters; routers
|
|
respond to such a request with a router advertisement packet that contains
|
|
Internet Layer configuration parameters.
|
|
|
|
.. note:: This method automatically disables IPv6 traffic forwarding on the
|
|
interface in question.
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> ipv6 address eui64 <prefix>
|
|
|
|
:abbr:`EUI-64 (64-Bit Extended Unique Identifier)` as specified in
|
|
:rfc:`4291` allows a host to assign iteslf a unique 64-Bit IPv6 address.
|
|
|
|
.. code-block:: none
|
|
|
|
set interfaces ethernet eth0 ipv6 address eui64 2001:db8:beef::/64
|
|
|
|
Speed/Duplex
|
|
------------
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> duplex <auto | full | half>
|
|
|
|
Configure physical interface duplex setting.
|
|
|
|
* auto - interface duplex setting is auto-negotiated
|
|
* full - always use full-duplex
|
|
* half - always use half-duplex
|
|
|
|
VyOS default will be `auto`.
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> speed <auto | 10 | 100 | 1000 | 2500 | 5000 | 10000 | 25000 | 40000 | 50000 | 100000>
|
|
|
|
Configure physical interface speed setting.
|
|
|
|
* auto - interface speed is auto-negotiated
|
|
* 10 - 10 MBit/s
|
|
* 100 - 100 MBit/s
|
|
* 1000 - 1 GBit/s
|
|
* 2500 - 2.5 GBit/s
|
|
* 5000 - 5 GBit/s
|
|
* 10000 - 10 GBit/s
|
|
* 25000 - 25 GBit/s
|
|
* 40000 - 40 GBit/s
|
|
* 50000 - 50 GBit/s
|
|
* 100000 - 100 GBit/s
|
|
|
|
VyOS default will be `auto`.
|
|
|
|
Link Administration
|
|
-------------------
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> description <description>
|
|
|
|
Assign given `<description>` to interface. Description will also be passed
|
|
to SNMP monitoring systems.
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> disable
|
|
|
|
Disable given `<interface>`. It will be placed in administratively down
|
|
(``A/D``) state.
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> disable-flow-control
|
|
|
|
Disable Ethernet flow control (pause frames).
|
|
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> mac <mac-address>
|
|
|
|
Configure user defined :abbr:`MAC (Media Access Control)` address on given
|
|
`<interface>`.
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> mtu <mtu>
|
|
|
|
Configure :abbr:`MTU (Maximum Transmission Unit)` on given `<interface>`. It
|
|
is the size (in bytes) of the largest ethernet frame sent on this link.
|
|
|
|
Router Advertisements
|
|
---------------------
|
|
|
|
Router advertisements are described in :rfc:`4861#section-4.6.2`. They are part
|
|
of what is known as :abbr:`SLAAC (Stateless Address Autoconfiguration)`.
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> ipv6 router-advert send-advert <true | false>
|
|
|
|
Enable or disable router advertisements in this `<interface>`.
|
|
|
|
.. cfgcmd:: set interfaces ethernet <interface> ipv6 router-advert prefix <prefix>
|
|
|
|
Prefix information is described in :rfc:`4861#section-4.6.2`.
|
|
|
|
Operation
|
|
=========
|
|
|
|
.. opcmd:: show interfaces ethernet
|
|
|
|
Show brief interface information.
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show interfaces ethernet
|
|
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
|
|
Interface IP Address S/L Description
|
|
--------- ---------- --- -----------
|
|
eth0 172.18.201.10/24 u/u LAN
|
|
eth1 172.18.202.11/24 u/u WAN
|
|
eth2 - u/D
|
|
|
|
.. opcmd:: show interfaces ethernet <interface>
|
|
|
|
Show detailed information on given `<interface>`
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show interfaces ethernet eth0
|
|
eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
|
|
link/ether 00:50:44:00:f5:c9 brd ff:ff:ff:ff:ff:ff
|
|
inet6 fe80::250:44ff:fe00:f5c9/64 scope link
|
|
valid_lft forever preferred_lft forever
|
|
|
|
RX: bytes packets errors dropped overrun mcast
|
|
56735451 179841 0 0 0 142380
|
|
TX: bytes packets errors dropped carrier collisions
|
|
5601460 62595 0 0 0 0
|
|
|
|
.. opcmd:: show interfaces ethernet <interface> physical
|
|
|
|
Show information about physical `<interface>`
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show interfaces ethernet eth0 physical
|
|
Settings for eth0:
|
|
Supported ports: [ TP ]
|
|
Supported link modes: 1000baseT/Full
|
|
10000baseT/Full
|
|
Supported pause frame use: No
|
|
Supports auto-negotiation: No
|
|
Supported FEC modes: Not reported
|
|
Advertised link modes: Not reported
|
|
Advertised pause frame use: No
|
|
Advertised auto-negotiation: No
|
|
Advertised FEC modes: Not reported
|
|
Speed: 10000Mb/s
|
|
Duplex: Full
|
|
Port: Twisted Pair
|
|
PHYAD: 0
|
|
Transceiver: internal
|
|
Auto-negotiation: off
|
|
MDI-X: Unknown
|
|
Supports Wake-on: uag
|
|
Wake-on: d
|
|
Link detected: yes
|
|
driver: vmxnet3
|
|
version: 1.4.16.0-k-NAPI
|
|
firmware-version:
|
|
expansion-rom-version:
|
|
bus-info: 0000:0b:00.0
|
|
supports-statistics: yes
|
|
supports-test: no
|
|
supports-eeprom-access: no
|
|
supports-register-dump: yes
|
|
supports-priv-flags: no
|
|
|
|
.. opcmd:: show interfaces ethernet <interface> transceiver
|
|
|
|
Show transceiver information from plugin modules, e.g SFP+, QSFP
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show interfaces ethernet eth5 transceiver
|
|
Identifier : 0x03 (SFP)
|
|
Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID)
|
|
Connector : 0x07 (LC)
|
|
Transceiver codes : 0x00 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00
|
|
Transceiver type : Ethernet: 1000BASE-SX
|
|
Encoding : 0x01 (8B/10B)
|
|
BR, Nominal : 1300MBd
|
|
Rate identifier : 0x00 (unspecified)
|
|
Length (SMF,km) : 0km
|
|
Length (SMF) : 0m
|
|
Length (50um) : 550m
|
|
Length (62.5um) : 270m
|
|
Length (Copper) : 0m
|
|
Length (OM3) : 0m
|
|
Laser wavelength : 850nm
|
|
Vendor name : CISCO-FINISAR
|
|
Vendor OUI : 00:90:65
|
|
Vendor PN : FTRJ-8519-7D-CS4
|
|
Vendor rev : A
|
|
Option values : 0x00 0x1a
|
|
Option : RX_LOS implemented
|
|
Option : TX_FAULT implemented
|
|
Option : TX_DISABLE implemented
|
|
BR margin, max : 0%
|
|
BR margin, min : 0%
|
|
Vendor SN : FNS092xxxxx
|
|
Date code : 0506xx
|
|
|