mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
113 lines
3.6 KiB
ReStructuredText
113 lines
3.6 KiB
ReStructuredText
.. _console_server:
|
|
|
|
##############
|
|
Console Server
|
|
##############
|
|
|
|
Starting of with VyOS 1.3 (equuleus) we added support for running VyOS as an
|
|
Out-of-Band Management device which provides remote access by means of SSH to
|
|
directly attached serial interfaces.
|
|
|
|
Serial interfaces can be any interface which is directly connected to the CPU
|
|
or chipset (mostly known as a ttyS interface in Linux) or any other USB to
|
|
serial converter (Prolific PL2303 or FTDI FT232/FT4232 based chips).
|
|
|
|
If you happened to use a Cisco NM-16A - Sixteen Port Async Network Module or
|
|
NM-32A - Thirty-two Port Async Network Module - this is your VyOS replacement.
|
|
|
|
For USB port information please refor to: :ref:`hardware_usb`.
|
|
|
|
Configuration
|
|
=============
|
|
|
|
Between computers, the most common configuration used was "8N1": eight bit
|
|
characters, with one start bit, one stop bit, and no parity bit. Thus 10 Baud
|
|
times are used to send a single character, and so dividing the signalling
|
|
bit-rate by ten results in the overall transmission speed in characters per
|
|
second. This is also the default setting if none of those options are defined.
|
|
|
|
.. cfgcmd:: set service console-server device <device> data-bits [7 | 8]
|
|
|
|
Configure either seven or eight data bits. This defaults to eight data
|
|
bits if left unconfigured.
|
|
|
|
.. cfgcmd:: set service console-server device <device> description <string>
|
|
|
|
A user friendly description identifying the connected peripheral.
|
|
|
|
.. cfgcmd:: set service console-server device <device> parity [even | odd | none]
|
|
|
|
Set the parity option for the console. If unset this will default to none.
|
|
|
|
.. cfgcmd:: set service console-server device <device> stop-bits [1 | 2]
|
|
|
|
Configure either one or two stop bits. This defaults to one stop bits if
|
|
left unconfigured.
|
|
|
|
.. cfgcmd:: set service console-server device <device> speed
|
|
[ 300 | 1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200 ]
|
|
|
|
.. note:: USB to serial converters will handle most of their work in software
|
|
so you should be carefull with the selected baudrate as some times they
|
|
can't cope with the expected speed.
|
|
|
|
Remote Access
|
|
-------------
|
|
|
|
Each individual configured console-server device can be directly exposed to
|
|
the outside world. A user can directly connect via SSH to the configured
|
|
port.
|
|
|
|
.. cfgcmd:: set service console-server device <device> ssh port <port>
|
|
|
|
Accept SSH connections for the given `<device>` on TCP port `<port>`.
|
|
After successfull authentication the user will be directly dropped to
|
|
the connected serial device.
|
|
|
|
.. hint:: Multiple users can connect to the same serial device but only
|
|
one is allowed to write to the console port.
|
|
|
|
Operation
|
|
=========
|
|
|
|
.. opcmd:: show console-server ports
|
|
|
|
Show configured serial ports and their respective interface configuration.
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show console-server ports
|
|
usb0b2.4p1.0 on /dev/serial/by-bus/usb0b2.4p1.0@ at 9600n
|
|
|
|
.. opcmd:: show console-server user
|
|
|
|
Show currently connected users.
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos:~$ show console-server user
|
|
usb0b2.4p1.0 up vyos@localhost
|
|
|
|
|
|
.. opcmd:: connect console <device>
|
|
|
|
Locally connect to serial port identified by `<device>`.
|
|
|
|
.. code-block:: none
|
|
|
|
vyos@vyos-r1:~$ connect console usb0b2.4p1.0
|
|
[Enter `^Ec?' for help]
|
|
[-- MOTD -- VyOS Console Server]
|
|
|
|
vyos-r2 login:
|
|
|
|
.. hint:: Multiple users can connect to the same serial device but only
|
|
one is allowed to write to the console port.
|
|
|
|
.. hint:: The sequence ``^Ec?`` translates to: ``Ctrl+E c ?``. To quit
|
|
the session use: ``Ctrl+E c .``
|
|
|
|
.. opcmd:: show log console-server
|
|
|
|
Show the console server log.
|