mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-11-04 00:02:05 +01:00
148 lines
6.2 KiB
ReStructuredText
148 lines
6.2 KiB
ReStructuredText
.. _dns-forwarding:
|
|
|
|
##############
|
|
DNS Forwarding
|
|
##############
|
|
|
|
Configuration
|
|
=============
|
|
|
|
VyOS provides DNS infrastructure for small networks. It is designed to be
|
|
lightweight and have a small footprint, suitable for resource constrained
|
|
routers and firewalls, for this we utilize PowerDNS recursor.
|
|
|
|
VyOS DNS forwarder does not require an upstream DNS server. It can serve as a
|
|
full recursive DNS server - but it can also forward queries to configurable
|
|
upstream DNS servers. By not configuring any upstream DNS servers you also
|
|
avoid to be tracked by the provider of your upstream DNS server.
|
|
|
|
.. cfgcmd:: set service dns forwarding system
|
|
|
|
Forward incoming DNS queries to the DNS servers configured under the ``system
|
|
name-server`` nodes.
|
|
|
|
.. cfgcmd:: set service dns forwarding name-server <address>
|
|
|
|
Send all DNS queries to the IPv4/IPv6 DNS server specified under `<address>`.
|
|
You can configure multiple nameservers here.
|
|
|
|
.. cfgcmd:: set service dns forwarding domain <domain-name> server <address>
|
|
|
|
Forward received queries for a particular domain (specified via `domain-name`)
|
|
to a given name-server. Multiple nameservers can be specified. You can use
|
|
this feature for a DNS split-horizon configuration.
|
|
|
|
.. note:: This also works for reverse-lookup zones (``18.172.in-addr.arpa``).
|
|
|
|
.. cfgcmd:: set service dns forwarding allow-from <network>
|
|
|
|
Given the fact that open DNS recursors could be used on DDOS amplification
|
|
attacts, you must configure the networks which are allowed to use this
|
|
recursor. A network of ``0.0.0.0/0`` or ``::/0`` would allow all IPv4 and
|
|
IPv6 networks to query this server. This is on general a bad idea.
|
|
|
|
.. cfgcmd:: set service dns forwarding dnssec <off | process-no-validate | process | log-fail | validate>
|
|
|
|
The PowerDNS Recursor has 5 different levels of DNSSEC processing, which can
|
|
be set with the dnssec setting. In order from least to most processing, these
|
|
are:
|
|
|
|
* **off** In this mode, no DNSSEC processing takes place. The recursor will
|
|
not set the DNSSEC OK (DO) bit in the outgoing queries and will ignore the
|
|
DO and AD bits in queries.
|
|
|
|
* **process-no-validate** In this mode the Recursor acts as a "security
|
|
aware, non-validating" nameserver, meaning it will set the DO-bit on
|
|
outgoing queries and will provide DNSSEC related RRsets (NSEC, RRSIG) to
|
|
clients that ask for them (by means of a DO-bit in the query), except for
|
|
zones provided through the auth-zones setting. It will not do any
|
|
validation in this mode, not even when requested by the client.
|
|
|
|
* **process** When dnssec is set to process the behaviour is similar to
|
|
process-no-validate. However, the recursor will try to validate the data
|
|
if at least one of the DO or AD bits is set in the query; in that case,
|
|
it will set the AD-bit in the response when the data is validated
|
|
successfully, or send SERVFAIL when the validation comes up bogus.
|
|
|
|
* **log-fail** In this mode, the recursor will attempt to validate all data
|
|
it retrieves from authoritative servers, regardless of the client's DNSSEC
|
|
desires, and will log the validation result. This mode can be used to
|
|
determine the extra load and amount of possibly bogus answers before
|
|
turning on full-blown validation. Responses to client queries are the same
|
|
as with process.
|
|
|
|
* **validate** The highest mode of DNSSEC processing. In this mode, all
|
|
queries will be validated and will be answered with a SERVFAIL in case of
|
|
bogus data, regardless of the client's request.
|
|
|
|
.. note:: The famous UNIX/Linux ``dig`` tool sets the AD-bit in the query.
|
|
This might lead to unexpected query results when testing. Set ``+noad``
|
|
on the ``dig`` commandline when this is the case.
|
|
|
|
.. note:: The ``CD``-bit is honored correctly for process and validate. For
|
|
log-fail, failures will be logged too.
|
|
|
|
.. cfgcmd:: set service dns forwarding ignore-hosts-file
|
|
|
|
Do not use local ``/etc/hosts`` file in name resolution. VyOS DHCP server
|
|
will use this file to add resolvers to assigned addresses.
|
|
|
|
.. cfgcmd:: set service dns forwarding max-cache-entries
|
|
|
|
Maximum number of DNS cache entries. 1 million per CPU core will generally
|
|
suffice for most installations.
|
|
|
|
.. cfgcmd:: set service dns forwarding negative-ttl
|
|
|
|
A query for which there is authoritatively no answer is cached to quickly
|
|
deny a record's existence later on, without putting a heavy load on the
|
|
remote server. In practice, caches can become saturated with hundreds of
|
|
thousands of hosts which are tried only once. This setting, which defaults
|
|
to 3600 seconds, puts a maximum on the amount of time negative entries are
|
|
cached.
|
|
|
|
.. cfgcmd:: set service dns forwarding listen-address
|
|
|
|
Local IPv4 or IPv6 addresses to bind to - waiting on this address for
|
|
incoming connections.
|
|
|
|
Example
|
|
=======
|
|
|
|
Router with two interfaces eth0 (WAN link) and eth1 (LAN) does want to make
|
|
use of DNS split-horizon for example.com.
|
|
|
|
* DNS request for example.com need to get forwarded to IPv4 address 192.0.2.254
|
|
and IPv6 address 2001:db8:cafe::1
|
|
* All other DNS requests are forwarded to DNS server listening on 192.0.2.1,
|
|
192.0.2.2, 2001:db8::1:ffff and 2001:db8::2:ffff
|
|
* DNS server is listening on the LAN interface addresses only, 192.168.1.254
|
|
for IPv4 and 2001:db8::ffff for IPv6
|
|
* Only clients from the LAN segment (192.168.1.0/24) are allowed to use this
|
|
server
|
|
|
|
.. code-block:: none
|
|
|
|
set service dns forwarding domain example.com server 192.0.2.254
|
|
set service dns forwarding domain example.com server 2001:db8:cafe::1
|
|
set service dns forwarding name-server 192.0.2.1
|
|
set service dns forwarding name-server 192.0.2.2
|
|
set service dns forwarding name-server 2001:db8::1:ffff
|
|
set service dns forwarding name-server 2001:db8::2:ffff
|
|
set service dns forwarding listen-address 192.168.1.254
|
|
set service dns forwarding listen-address 2001:db8::ffff
|
|
set service dns forwarding allow-from 192.168.1.0/24
|
|
set service dns forwarding allow-from 2001:db8::/64
|
|
|
|
Operation
|
|
=========
|
|
|
|
.. opcmd:: reset dns forwarding <all | domain>
|
|
|
|
Reset local DNS forwarding cache database. You can reset the cache for all
|
|
entries or only for entries to a specific domain.
|
|
|
|
.. opcmd:: restart dns forwarding
|
|
|
|
Restart DNS recursor process which also invalidates the cache.
|