vyos/vyos-documentation
1
0
Fork 0
mirror of https://github.com/vyos/vyos-documentation.git synced 2025-11-03 04:12:03 +01:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #741 from fett0/import/export-filter-ospf

Browse Source 
ospf: add export-list/import-list & mamixum-paths
This commit is contained in:
Robert Göhler 2022-03-28 12:47:12 +02:00 committed by GitHub
commit df831d1ec6
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 22 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
docs/configuration/protocols/ospf.rst
View File

@ -38,10 +38,10 @@ starts when the first ospf enabled interface is configured.
specified in decimal notation in the range from 0 to 4294967295. Or it
can be specified in dotted decimal notation similar to ip address.
Prefix length in interface must be equal or bigger (i.e. smaller network) than
prefix length in network statement. For example statement above doesn't enable
ospf on interface with address 192.168.1.1/23, but it does on interface with
address 192.168.1.129/25.
Prefix length in interface must be equal or bigger (i.e. smaller network)
than prefix length in network statement. For example statement above doesn't
enable ospf on interface with address 192.168.1.1/23, but it does on
interface with address 192.168.1.129/25.
In some cases it may be more convenient to enable OSPF on a per interface/subnet
basis :cfgcmd:`set protocols ospf interface <interface> area <x.x.x.x | x>`
@ -162,6 +162,12 @@ Optional
interfaces where router adjacencies are expected need to be configured
with the :cfgcmd:`passive-interface-exclude` command.
.. cfgcmd:: set protocols ospf maximum-paths <1-64>
Use this command to control the maximum number of equal cost paths to reach
a specific destination. The upper limit may differ if you change the value
of MULTIPATH_NUM during compilation. The default is MULTIPATH_NUM (64).
.. cfgcmd:: set protocols ospf refresh timers <seconds>
The router automatically updates link-state information with its neighbors.
@ -271,6 +277,18 @@ Area Configuration
intra area paths from this range are not advertised into other areas.
This command makes sense in ABR only.
.. cfgcmd:: set protocols ospf area <number> export-list <acl_number>
Filter Type-3 summary-LSAs announced to other areas originated from
intra- area paths from specified area.
This command makes sense in ABR only.
.. cfgcmd:: set protocols ospf area <number> import-list <acl_number>
Same as export-list, but it applies to paths announced into specified
area as Type-3 summary-LSAs.
This command makes sense in ABR only.
.. cfgcmd:: set protocols ospf area <number> range <A.B.C.D/M> substitute
<E.F.G.H/M>