interfaces: vlan: remove wrong arg in cmd headline

docs/_include/interface-address-with-dhcp.txt

@@ -1,4 +1,4 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var4 }} address <address | dhcp |
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} address <address | dhcp |
    dhcpv6>
 
   Configure interface `<interface>` with one or more interface addresses.

docs/_include/interface-description.txt

@@ -1,4 +1,4 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var4 }} description <description>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} description <description>
 
   Set a human readable, descriptive alias for this connection. Alias is used by
   e.g. the :opcmd:`show interfaces` command or SNMP based monitoring tools.

docs/_include/interface-dhcp-options.txt

@@ -1,4 +1,5 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcp-options client-id <description>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+   dhcp-options client-id <description>
 
   :rfc:`2131` states: The client MAY choose to explicitly provide the identifier
   through the 'client identifier' option. If the client supplies a 'client
@@ -10,9 +11,10 @@
 
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcp-options client-id 'foo-bar'
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcp-options client-id 'foo-bar'
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcp-options host-name <hostname>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  dhcp-options host-name <hostname>
 
   Instead of sending the real system hostname to the DHCP server, overwrite the
   host-name with this given-value.
@@ -21,20 +23,22 @@
 
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcp-options host-name 'VyOS'
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcp-options host-name 'VyOS'
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcp-options vendor-class-id <vendor-id>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  dhcp-options vendor-class-id <vendor-id>
 
   The vendor-class-id option can be used to request a specific class of vendor
   options from the server.
 
-  Example
+  Example:
 
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcp-options vendor-class-id 'VyOS'
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcp-options vendor-class-id 'VyOS'
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcp-options no-default-route
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  dhcp-options no-default-route
 
   Only request an address from the DHCP server but do not request a default
   gateway.
@@ -43,4 +47,4 @@
 
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcp-options no-default-route
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcp-options no-default-route

docs/_include/interface-dhcpv6-options.txt

@@ -1,38 +1,38 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcpv6-options parameters-only
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  dhcpv6-options parameters-only
 
   This statement specifies dhcp6c to only exchange informational configuration
   parameters with servers. A list of DNS server addresses is an example of such
   parameters. This statement is useful when the client does not need stateful
   configuration parameters such as IPv6 addresses or prefixes.
 
-  Example:
-
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcpv6-options parameters-only
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcpv6-options parameters-only
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcpv6-options rapid-commit
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  dhcpv6-options rapid-commit
 
   When rapid-commit is specified, dhcp6c will include a rapid-commit option in
   solicit messages and wait for an immediate reply instead of advertisements.
 
-  Example:
-
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcpv6-options rapid-commit
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcpv6-options rapid-commit
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcpv6-options temporary
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  dhcpv6-options temporary
 
   Request only a temporary address and not form an IA_NA (Identity Association
   for Non-temporary Addresses) partnership.
 
-  Example
-
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcpv6-options temporary
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcpv6-options temporary
 
 .. cmdinclude:: ../_include/interface-dhcpv6-prefix-delegation.txt
   :var0: {{ var0 }}
   :var1: {{ var1 }}
+  :var2: {{ var2 }}
+  :var3: {{ var3 }}
+  :var4: {{ var4 }}

docs/_include/interface-dhcpv6-prefix-delegation.txt

@@ -3,7 +3,8 @@
 VyOS 1.3 (equuleus) supports DHCPv6-PD (:rfc:`3633`). DHCPv6 Prefix Delegation
 is supported by most ISPs who provide native IPv6 for consumers on fixed networks.
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcpv6-option pd <id> length <length>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  dhcpv6-option pd <id> length <length>
 
   Some ISPs by default only delegate a /64 prefix. To request for a specific
   prefix size use this option to request for a bigger delegation for this pd
@@ -12,15 +13,14 @@ is supported by most ISPs who provide native IPv6 for consumers on fixed network
 
   The default value corresponds to 64.
 
-  Example:
-
   To request a /56 prefix from your ISP use:
 
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcpv6-options pd 0 length 56
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcpv6-options pd 0 length 56
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcpv6-option pd <id> interface <delegatee> address <address>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  dhcpv6-option pd <id> interface <delegatee> address <address>
 
   Specify the interface address used locally on the interfcae where the prefix
   has been delegated to. ID must be a decimal integer.
@@ -29,15 +29,16 @@ is supported by most ISPs who provide native IPv6 for consumers on fixed network
   complete interface address. The default is to use the EUI-64 address of the
   interface.
 
-   Example: Delegate a /64 prefix to interface eth0.10 which will use a local
+  Example: Delegate a /64 prefix to interface eth8 which will use a local
   address on this router of ``<prefix>::ffff``, as the address 65534 will
   correspond to ``ffff`` in hexadecimal notation.
 
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcpv6-option pd 0 interface eth0.10 address 65534
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcpv6-option pd 0 interface eth8 address 65534
 
-.. cfgcmd:: set interfaces {{ var0 }} <interface> dhcpv6-option pd <id> interface <delegatee> sla-id <id>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  dhcpv6-option pd <id> interface <delegatee> sla-id <id>
 
   Specify the identifier value of the site-level aggregator (SLA) on the
   interface. ID must be a decimal number greater then 0 which fits in the
@@ -50,5 +51,5 @@ is supported by most ISPs who provide native IPv6 for consumers on fixed network
 
   .. code-block:: none
 
-    set interfaces {{ var0 }} {{ var1 }} dhcpv6-option pd 0 interface eth0.10 sla-id 1
+    set interfaces {{ var0 }} {{ var1 }} {{ var2 }} {{ var4 }} dhcpv6-option pd 0 interface eth8 sla-id 1
 

docs/_include/interface-disable-link-detect.txt

@@ -1,4 +1,5 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var4 }} disable-link-detect
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  disable-link-detect
 
   Use this command to direct an interface to not detect any physical state
   changes on a link, for example, when the cable is unplugged.

docs/_include/interface-disable.txt

@@ -1,4 +1,4 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var4 }} disable
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} disable
 
   Disable given `<interface>`. It will be placed in administratively down
   (``A/D``) state.

docs/_include/interface-ipv6-addr-autoconf.txt

@@ -1,4 +1,5 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var4 }} ipv6 address autoconf
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  ipv6 address autoconf
 
   :abbr:`SLAAC (Stateless Address Autoconfiguration)` :rfc:`4862`. IPv6 hosts
   can configure themselves automatically when connected to an IPv6 network using

docs/_include/interface-ipv6-addr-eui64.txt

@@ -1,4 +1,5 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var4 }} ipv6 address eui64 <prefix>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  ipv6 address eui64 <prefix>
 
   :abbr:`EUI-64 (64-Bit Extended Unique Identifier)` as specified in
   :rfc:`4291` allows a host to assign iteslf a unique 64-Bit IPv6 address.

docs/_include/interface-mac.txt

@@ -1,4 +1,5 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var4 }} mac <xx:xx:xx:xx:xx:xx>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  mac <xx:xx:xx:xx:xx:xx>
 
   Configure user defined :abbr:`MAC (Media Access Control)` address on given
   `<interface>`.

docs/_include/interface-mtu.txt

@@ -1,4 +1,5 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var4 }} mtu <mtu>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  mtu <mtu>
 
   Configure :abbr:`MTU (Maximum Transmission Unit)` on given `<interface>`. It
   is the size (in bytes) of the largest ethernet frame sent on this link.

docs/_include/interface-vlan.txt

@@ -91,3 +91,19 @@ term used for this is ``vif``.
    :var2: vif
    :var3: <vlan-id>
    :var4: 10
+
+**DHCP(v6)**
+
+.. cmdinclude:: ../_include/interface-dhcp-options.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10
+
+.. cmdinclude:: ../_include/interface-dhcpv6-options.txt
+   :var0: {{ var0 }}
+   :var1: {{ var1 }}
+   :var2: vif
+   :var3: <vlan-id>
+   :var4: 10

docs/_include/interface-vrf.txt

@@ -1,4 +1,5 @@
-.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }} {{ var4 }} vrf <vrf>
+.. cfgcmd:: set interfaces {{ var0 }} <interface> {{ var2 }} {{ var3 }}
+  vrf <vrf>
 
   Place interface in given VRF instance.