vyos/vyos-documentation
1
0
Fork 0
mirror of https://github.com/vyos/vyos-documentation.git synced 2025-10-26 08:41:46 +01:00
Code Issues Packages Projects Releases Wiki Activity

MPLS: fix conf-mode definitions and line breaks

Browse Source 
Moved the configuration mode commands and descriptions to fit VyOS template.
This commit is contained in:
Cheeze_It 2020-10-19 19:42:40 -06:00
parent 46d1c98105
commit c44aa8aeac
1 changed files with 15 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
docs/routing/mpls.rst
View File

@ -37,7 +37,7 @@ For more information on how MPLS label switching works, please go visit
Label Distribution Protocol
===========================
The :abbr: `MPLS (Multi-Protocol Label Switching)` architecture does not assume
The :abbr:`MPLS (Multi-Protocol Label Switching)` architecture does not assume
a single protocol to create MPLS paths. VyOS supports the Label Distribution
Protocol (LDP) as implemented by FRR, based on :rfc:`5036`.
@ -61,44 +61,44 @@ must be explicitly set in the configuration.
Configuration Options
=====================
Use this command to enable LDP, and enable MPLS processing on the interface you
define.
.. cfgcmd:: set protocols mpls ldp interface <interface>
Use this command to enable LDP, and enable MPLS processing on the interface you
define.
.. cfgcmd:: set protocols mpls ldp router-id <address>
Use this command to configure the IP address used as the LDP router-id of the
local device.
.. cfgcmd:: set protocols mpls ldp router-id <address>
.. cfgcmd:: set protocols mpls ldp discovery transport-ipv4-address <IPv4 address>
.. cfgcmd:: set protocols mpls ldp discovery transport-ipv6-address <IPv6 address>
Use this command to set the IPv4 or IPv6 transport-address used by LDP.
.. cfgcmd:: set protocols mpls ldp discovery transport-ipv4-address <IPv4 address>
.. cfgcmd:: set protocols mpls ldp discovery transport-ipv6-address <IPv6 address>
.. cfgcmd:: set protocols mpls ldp neighbor <IPv4 address> password <password>
Use this command to configure authentication for LDP peers. Set the
IP address of the LDP peer and a password that should be shared in
order to become neighbors.
.. cfgcmd:: set protocols mpls ldp neighbor <IPv4 address> password <password>
.. cfgcmd:: set protocols mpls ldp discovery hello-interval <seconds>
.. cfgcmd:: set protocols mpls ldp discovery hello-holdtime <seconds>
Use this command if you would like to set the discovery hello and hold time
parameters.
.. cfgcmd:: set protocols mpls ldp discovery hello-interval <seconds>
.. cfgcmd:: set protocols mpls ldp discovery hello-holdtime <seconds>
Use this command if you would like to set the TCP session hold time intervals.
.. cfgcmd:: set protocols mpls ldp discovery session-ipv4-holdtime <seconds>
.. cfgcmd:: set protocols mpls ldp discovery session-ipv6-holdtime <seconds>
Use this command if you would like for the router to advertise FECs with a label
of 0 for explicit null operations.
Use this command if you would like to set the TCP session hold time intervals.
.. cfgcmd:: set protocols mpls ldp export ipv4 explicit-null
.. cfgcmd:: set protocols mpls ldp export ipv6 explicit-null
Use this command if you would like for the router to advertise FECs with a label
of 0 for explicit null operations.
Sample configuration to setup LDP on VyOS
-----------------------------------------