vyos/vyos-documentation
1
0
Fork 0
mirror of https://github.com/vyos/vyos-documentation.git synced 2025-10-26 08:41:46 +01:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #157 from rebortg/addresspace

Browse Source 
Addresspace
This commit is contained in:
Christian Poessinger 2019-12-01 22:20:01 +01:00 committed by GitHub
commit b3d9344a7e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
11 changed files with 36 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
docs/appendix/commandtree/configmode.rst
View File

@ -389,7 +389,7 @@ See here how to move the configuration entrys from vlanid 3 to 2
[edit interfaces ethernet eth1]
vyos@vyos# show
duplex auto
hw-id 08:00:27:81:c6:59
hw-id 00:53:22:81:c6:59
smp-affinity auto
speed auto
vif 3 {
@ -400,7 +400,7 @@ See here how to move the configuration entrys from vlanid 3 to 2
[edit interfaces ethernet eth1]
vyos@vyos# show
duplex auto
hw-id 08:00:27:81:c6:59
hw-id 00:53:22:81:c6:59
smp-affinity auto
speed auto
+vif 2 {
@ -488,7 +488,7 @@ Show the hole config, the address and description of eth1 is moving to vlan 2 if
ethernet eth0 {
address dhcp
duplex auto
hw-id 08:00:27:2b:c0:0b
hw-id 00:53:22:2b:c0:0b
smp-affinity auto
speed auto
}
@ -496,7 +496,7 @@ Show the hole config, the address and description of eth1 is moving to vlan 2 if
- address 10.1.1.1/32
- description "MGMT Interface"
duplex auto
hw-id 08:00:27:81:c6:59
hw-id 00:53:22:81:c6:59
smp-affinity auto
speed auto
+ vif 2 {

10
docs/appendix/examples/dmvpn.rst
View File

@ -13,7 +13,7 @@ Configuration
set interfaces tunnel tun100 address '172.16.253.134/29'
set interfaces tunnel tun100 encapsulation 'gre'
set interfaces tunnel tun100 local-ip '11.22.33.44'
set interfaces tunnel tun100 local-ip '203.0.113.44'
set interfaces tunnel tun100 multicast 'enable'
set interfaces tunnel tun100 parameters ip key '1'
@ -69,7 +69,7 @@ Use this configuration on your Cisco device:
crypto pki token default removal timeout 0
crypto keyring DMVPN
pre-shared-key address 1.2.3.4 key <secretkey>
pre-shared-key address 198.51.100.2 key <secretkey>
!
crypto isakmp policy 10
encr aes 256
@ -80,7 +80,7 @@ Use this configuration on your Cisco device:
crypto isakmp keepalive 30 30 periodic
crypto isakmp profile DMVPN
keyring DMVPN
match identity address 11.22.33.44 255.255.255.255
match identity address 203.0.113.44 255.255.255.255
!
crypto ipsec transform-set DMVPN-AES256 esp-aes 256 esp-sha-hmac
mode transport
@ -95,8 +95,8 @@ Use this configuration on your Cisco device:
ip address 172.16.253.129 255.255.255.248
no ip redirects
ip nhrp authentication <nhrp secret key>
ip nhrp map multicast 11.22.33.44
ip nhrp map 172.16.253.134 11.22.33.44
ip nhrp map multicast 203.0.113.44
ip nhrp map 172.16.253.134 203.0.113.44
ip nhrp network-id 1
ip nhrp holdtime 600
ip nhrp nhs 172.16.253.134

2
docs/interfaces/addresses.rst
View File

@ -32,7 +32,7 @@ The command is ``set interfaces $type $name address $address``. Examples:
set interfaces ethernet eth0 address 192.0.2.1/24
set interfaces tunnel tun0 address 10.0.0.1/30
set interfaces bridge br0 address 203.0.113.45/26
set interfaces ethernet eth0 vif 30 address 192.0.30.254/24
set interfaces ethernet eth0 vif 30 address 198.51.100.254/24
DHCP
****

2
docs/interfaces/bridge.rst
View File

@ -109,4 +109,4 @@ The MAC address-table for a bridge can be displayed using the
vyos@vyos:~$ show bridge br100 macs
port no mac addr is local? ageing timer
1 00:0c:29:44:3b:19 yes 0.00
1 00:53:29:44:3b:19 yes 0.00

2
docs/interfaces/ethernet.rst
View File

@ -23,7 +23,7 @@ Resulting in:
address 2001:db8:1::ffff/64
description INSIDE
duplex auto
hw-id 00:0c:29:44:3b:19
hw-id 00:53:29:44:3b:19
smp_affinity auto
speed auto
}

2
docs/interfaces/index.rst
View File

@ -25,7 +25,7 @@ command.
vyos@vyos:~$ show interfaces ethernet eth0
eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:0c:29:44:3b:0f brd ff:ff:ff:ff:ff:ff
link/ether 00:53:29:44:3b:0f brd ff:ff:ff:ff:ff:ff
inet 172.16.51.129/24 brd 172.16.51.255 scope global eth0
inet6 fe80::20c:29ff:fe44:3b0f/64 scope link
valid_lft forever preferred_lft forever

2
docs/interfaces/vlan.rst
View File

@ -45,7 +45,7 @@ Resulting in:
address 2001:db8:100::1/64
description INSIDE
duplex auto
hw-id 00:0c:29:44:3b:19
hw-id 00:53:29:44:3b:19
smp_affinity auto
speed auto
vif 100 {

22
docs/interfaces/wireless.rst
View File

@ -39,7 +39,7 @@ to as :abbr:`SSID (Service Set Identifier)`, and MAC addresses.
The WAP in this example has the following characteristics:
* IP address ``192.0.2.1/24``
* IP address ``192.168.2.1/24``
* Network ID (SSID) ``TEST``
* WPA passphrase ``12345678``
* Use 802.11n protocol
@ -47,7 +47,7 @@ The WAP in this example has the following characteristics:
.. code-block:: none
set interfaces wireless wlan0 address '192.0.2.1/24'
set interfaces wireless wlan0 address '192.168.2.1/24'
set interfaces wireless wlan0 type access-point
set interfaces wireless wlan0 channel 1
set interfaces wireless wlan0 mode n
@ -63,7 +63,7 @@ Resulting in
interfaces {
[...]
wireless wlan0 {
address 192.0.2.1/24
address 192.168.2.1/24
channel 1
mode n
security {
@ -103,24 +103,24 @@ is responsible for authenticating the users.
The WAP in this example has the following characteristics:
* IP address ``192.0.2.1/24``
* IP address ``192.168.2.1/24``
* Network ID (SSID) ``Enterprise-TEST``
* WPA passphrase ``12345678``
* Use 802.11n protocol
* Wireless channel ``1``
* RADIUS server at ``192.0.3.10`` with shared-secret ``VyOSPassword``
* RADIUS server at ``192.168.3.10`` with shared-secret ``VyOSPassword``
.. code-block:: none
set interfaces wireless wlan0 address '192.0.2.1/24'
set interfaces wireless wlan0 address '192.168.2.1/24'
set interfaces wireless wlan0 type access-point
set interfaces wireless wlan0 channel 1
set interfaces wireless wlan0 mode n
set interfaces wireless wlan0 ssid 'TEST'
set interfaces wireless wlan0 security wpa mode wpa2
set interfaces wireless wlan0 security wpa cipher CCMP
set interfaces wireless wlan0 security wpa radius server 192.0.3.10 key 'VyOSPassword'
set interfaces wireless wlan0 security wpa radius server 192.0.3.10 port 1812
set interfaces wireless wlan0 security wpa radius server 192.168.3.10 key 'VyOSPassword'
set interfaces wireless wlan0 security wpa radius server 192.168.3.10 port 1812
Resulting in
@ -129,7 +129,7 @@ Resulting in
interfaces {
[...]
wireless wlan0 {
address 192.0.2.1/24
address 192.168.2.1/24
channel 1
mode n
security {
@ -137,7 +137,7 @@ Resulting in
cipher CCMP
mode wpa2
radius {
server 192.0.3.10 {
server 192.168.3.10 {
key 'VyOSPassword'
port 1812
}
@ -263,7 +263,7 @@ The wireless interface identifier can range from wlan0 to wlan999.
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
wlan0 192.0.2.254/24 u/u
wlan0 192.168.2.254/24 u/u
.. opcmd:: show interfaces wireless <wlanX> queue

8
docs/routing/arp.rst
View File

@ -35,8 +35,8 @@ Display all known ARP table entries spanning accross all interfaces
vyos@vyos:~$ show protocols static arp
Address HWtype HWaddress Flags Mask Iface
10.1.1.1 ether 08:00:27:de:23:2e C eth1
10.1.1.100 ether 08:00:27:de:23:aa CM eth1
10.1.1.1 ether 00:53:00:de:23:2e C eth1
10.1.1.100 ether 00:53:00:de:23:aa CM eth1
.. opcmd:: show protocols static arp interface eth1
@ -47,7 +47,7 @@ Display all known ARP table entries on a given interface only (`eth1`):
vyos@vyos:~$ show protocols static arp interface eth1
Address HWtype HWaddress Flags Mask Iface
10.1.1.1 ether 08:00:27:de:23:2e C eth1
10.1.1.100 ether 08:00:27:de:23:aa CM eth1
10.1.1.1 ether 00:53:00:de:23:2e C eth1
10.1.1.100 ether 00:53:00:de:23:aa CM eth1
.. _ARP: https://en.wikipedia.org/wiki/Address_Resolution_Protocol

8
docs/routing/routing-policy.rst
View File

@ -22,8 +22,8 @@ Routing Policy Example
set policy route-map setmet rule 2 set as-path-prepend '2 2 2'
#Apply policy to BGP
set protocols bgp 1 neighbor 1.1.1.2 address-family ipv4-unicast route-map import 'setmet'
set protocols bgp 1 neighbor 1.1.1.2 address-family ipv4-unicast soft-reconfiguration 'inbound' <<<< ***
set protocols bgp 1 neighbor 203.0.113.2 address-family ipv4-unicast route-map import 'setmet'
set protocols bgp 1 neighbor 203.0.113.2 address-family ipv4-unicast soft-reconfiguration 'inbound' <<<< ***
*** get policy update without bouncing the neighbor
@ -38,7 +38,7 @@ Routing Policy Example
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 22.22.22.22/32 1.1.1.2 1 0 2 i < Path
*> 198.51.100.3/32 203.0.113.2 1 0 2 i < Path
Total number of prefixes 1
@ -53,7 +53,7 @@ Routing Policy Example
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 22.22.22.22/32 1.1.1.2 1 0 2 2 2 2 i < longer AS_path length
*> 198.51.100.3/32 203.0.113.2 1 0 2 2 2 2 i < longer AS_path length
Total number of prefixes 1
vyos@vos1:~$

6
docs/services/pppoe-server.rst
View File

@ -35,7 +35,7 @@ Connections can be locally checked via the command
show pppoe-server sessions
ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
-------+----------+------------+-------------------+-------------+--------+----------+----------+----------
ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
ppp0 | foo | 10.1.1.100 | 00:53:00:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
Client IP address pools
@ -163,7 +163,7 @@ Once the user is connected, the user session is using the set limits and can be
show pppoe-server sessions
ifname | username | ip | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
-------+----------+------------+-------------------+-------------+--------+----------+----------+----------
ppp0 | foo | 10.1.1.100 | 08:00:27:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
ppp0 | foo | 10.1.1.100 | 00:53:00:ba:db:15 | 20480/10240 | active | 00:00:11 | 214 B | 76 B
RADIUS based shaper setup
@ -212,6 +212,6 @@ The client, once successfully authenticated, will receive an IPv4 and an IPv6 /6
vyos@pppoe-server:~$ sh pppoe-server sessions
ifname | username | ip | ip6 | ip6-dp | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes
--------+----------+-------------+--------------------------+---------------------+-------------------+------------+--------+----------+----------+----------
ppp0 | test | 192.168.0.1 | 2001:db8:8002:0:200::/64 | 2001:db8:8003::1/56 | 08:00:27:12:42:eb | | active | 00:00:49 | 875 B | 2.1 KiB
ppp0 | test | 192.168.0.1 | 2001:db8:8002:0:200::/64 | 2001:db8:8003::1/56 | 00:53:00:12:42:eb | | active | 00:00:49 | 875 B | 2.1 KiB
.. _`accel-ppp`: https://accel-ppp.org/