changelog: fix lint errors

This commit is contained in:
rebortg 2020-12-11 22:39:04 +01:00
parent 64161ff044
commit ac6b335b1a
2 changed files with 43 additions and 21 deletions

View File

@ -8,21 +8,26 @@ Resolved issues
* :vytask:`T258` Can not configure wan load-balancing on vyos-1.2
* :vytask:`T818` SNMP v3 - remove required engineid from user node
* :vytask:`T1030` Upgrade ddclient from 3.8.2 to 3.9.0 (support Cloudflare API v4)
* :vytask:`T1030` Upgrade ddclient from 3.8.2 to 3.9.
(support Cloudflare API v4)
* :vytask:`T1183` BFD Support via FRR
* :vytask:`T1299` Allow SNMPd to be extended with custom scripts
* :vytask:`T1351` accel-pppoe adding CIDR based IP pool option
* :vytask:`T1391` In route-map set community additive
* :vytask:`T1394` syslog systemd and host_name.py race condition
* :vytask:`T1401` Copying files with the FTP protocol fails if the password contains special characters
* :vytask:`T1421` OpenVPN client push-route stopped working, needs added quotes to fix
* :vytask:`T1401` Copying files with the FTP protocol fails if the passwor
contains special characters
* :vytask:`T1421` OpenVPN client push-route stopped working, needs added quotes
to fix
* :vytask:`T1430` Add options for custom DHCP client-id and hostname
* :vytask:`T1447` Python subprocess called without import in host_name.py
* :vytask:`T1470` improve output of "show dhcpv6 server leases"
* :vytask:`T1485` Enable 'AdvIntervalOpt' option in for radvd.conf
* :vytask:`T1496` Separate rolling release and LTS kernel builds
* :vytask:`T1560` "set load-balancing wan rule 0" causes segfault and prevents load balancing from starting
* :vytask:`T1568` strip-private command improvement for additional masking of IPv6 and MAC address
* :vytask:`T1560` "set load-balancing wan rule 0" causes segfault and prevent
load balancing from starting
* :vytask:`T1568` strip-private command improvement for additional masking o
IPv6 and MAC address
* :vytask:`T1578` completion offers "show table", but show table does not exist
* :vytask:`T1593` Support ip6gre
* :vytask:`T1597` /usr/sbin/rsyslogd after deleting "system syslog"
@ -35,29 +40,36 @@ Resolved issues
* :vytask:`T1708` Update Rolling Release Kernel to 4.19.76
* :vytask:`T1709` Update WireGuard to 0.0.20190913
* :vytask:`T1716` Update Intel NIC drivers to recent versions
* :vytask:`T1726` Update Linux Firmware binaries to a more recent version 2019-03-14 -> 2019-10-07
* :vytask:`T1726` Update Linux Firmware binaries to a more recen
version 2019-03-14 -> 2019-10-07
* :vytask:`T1728` Update Linux Kernel to 4.19.79
* :vytask:`T1737` SNMP tab completion missing
* :vytask:`T1738` Copy SNMP configuration from node to node raises exception
* :vytask:`T1740` Broken OSPFv2 virtual-link authentication
* :vytask:`T1742` NHRP unable to commit.
* :vytask:`T1745` dhcp-server commit fails with "DHCP range stop address x must be greater or equal to the range start address y!" when static mapping has same IP as range stop
* :vytask:`T1745` dhcp-server commit fails with "DHCP range stop address
must be greater or equal to the range start address y!" when static mapping
has same IP as range stop
* :vytask:`T1749` numeric validator doesn't support multiple ranges
* :vytask:`T1769` Remove complex SNMPv3 Transport Security Model (TSM)
* :vytask:`T1772` <regex> constraints in XML are partially broken
* :vytask:`T1778` Kilobits/Megabits difference in configuration Vyos/FRR
* :vytask:`T1780` Adding ipsec ike closeaction
* :vytask:`T1786` disable-dhcp-nameservers is missed in current host_name.py implementation
* :vytask:`T1786` disable-dhcp-nameservers is missed in current host_name.p
implementation
* :vytask:`T1788` Intel QAT (QuickAssist Technology ) implementation
* :vytask:`T1792` Update WireGuard to Debian release 0.0.20191012-1
* :vytask:`T1800` Update Linux Kernel to v4.19.84
* :vytask:`T1809` Wireless: SSID scan does not work in AP mode
* :vytask:`T1811` Upgrade from 1.1.8: Config file migration failed: module=l2tp
* :vytask:`T1812` DHCP: hostnames of clients not resolving after update v1.2.3 -> 1.2-rolling
* :vytask:`T1811` Upgrade from 1.1.8: Config file migratio
failed: module=l2tp
* :vytask:`T1812` DHCP: hostnames of clients not resolving afte
update v1.2.3 -> 1.2-rolling
* :vytask:`T1819` Reboot kills SNMPv3 configuration
* :vytask:`T1822` Priority inversion wireless interface dhcpv6
* :vytask:`T1825` Improve DHCP configuration error message
* :vytask:`T1836` import-conf-mode-commands in vyos-1x/scripts fails to create an xml
* :vytask:`T1836` import-conf-mode-commands in vyos-1x/scripts fails
to create an xml
* :vytask:`T1839` LLDP shows "VyOS unknown" instead of "VyOS"
* :vytask:`T1841` PPP ipv6-up.d direcotry missing
* :vytask:`T1893` igmp-proxy: Do not allow adding unknown interface

View File

@ -11,23 +11,32 @@ Resolved issues
* :vytask:`1301` bgp peer-groups don't work when "no-ipv4-unicast" is enabled.
* :vytask:`1341` Adding rate-limiter for pppoe server users
* :vytask:`1376` Incorrect DHCP lease counting
* :vytask:`1392` Large firewall rulesets cause the system to lose configuration and crash at startup
* :vytask:`1416` 2 dhcp server run in failover mode can't sync hostname with each other
* :vytask:`1392` Large firewall rulesets cause the system to lose configuration
and crash at startup
* :vytask:`1416` 2 dhcp server run in failover mode can't sync hostname with
each other
* :vytask:`1452` accel-pppoe - add vendor option to shaper
* :vytask:`1490` BGP configuration (is lost|not applied) when updating 1.1.8 -> 1.2.1
* :vytask:`1490` BGP configuration (is lost|not applied) when updating
1.1.8 -> 1.2.1
* :vytask:`1780` Adding ipsec ike closeaction
* :vytask:`1803` Unbind NTP while it's not requested...
* :vytask:`1821` "authentication mode radius" has no effect for PPPoE server
* :vytask:`1827` Increase default gc_thresh
* :vytask:`1828` Missing completion helper for "set system syslog host 192.0.2.1 facility all protocol"
* :vytask:`1832` radvd adding feature DNSSL branch.example.com example.com to existing package
* :vytask:`1828` Missing completion helper for "set system syslog host
192.0.2.1 facility all protocol"
* :vytask:`1832` radvd adding feature DNSSL branch.example.com example.com to
existing package
* :vytask:`1837` PPPoE unrecognized option 'replacedefaultroute'
* :vytask:`1851` wireguard - changing the pubkey on an existing peer seems to destroy the running config.
* :vytask:`1851` wireguard - changing the pubkey on an existing peer seems to
destroy the running config.
* :vytask:`1858` l2tp: Delete depricated outside-nexthop and add gateway-address
* :vytask:`1864` Lower IPSec DPD timeout lower limit from 10s -> 2s
* :vytask:`1879` Extend Dynamic DNS XML definition value help strings and validators
* :vytask:`1881` Execute permissions are removed from custom SNMP scripts at commit time
* :vytask:`1884` Keeping VRRP transition-script native behaviour and adding stop-script
* :vytask:`1879` Extend Dynamic DNS XML definition value help strings and
validators
* :vytask:`1881` Execute permissions are removed from custom SNMP scripts at
commit time
* :vytask:`1884` Keeping VRRP transition-script native behaviour and adding
stop-script
* :vytask:`1891` Router announcements broken on boot
* :vytask:`1900` Enable SNMP for VRRP.
* :vytask:`1902` Add redistribute non main table in bgp
@ -38,7 +47,8 @@ Resolved issues
* :vytask:`1934` Change default hostname when deploy from OVA without params.
* :vytask:`1935` NIC identification and usage problem in Hyper-V environments
* :vytask:`1936` pppoe-server CLI control features
* :vytask:`1964` SNMP Script-extensions allows names with spaces, but commit fails
* :vytask:`1964` SNMP Script-extensions allows names with spaces, but commit
fails
* :vytask:`1967` BGP parameter "enforce-first-as" does not work anymore
* :vytask:`1970` Correct adding interfaces on boot
* :vytask:`1971` Missing modules in initrd.img for PXE boot