tftp: sync branches

This commit is contained in:
rebortg 2023-01-31 15:43:57 +01:00
parent a18e7d46e7
commit 7d3fa73deb

View File

@ -15,8 +15,8 @@ Configuration
.. cfgcmd:: set service tftp-server directory <directory>
Enable TFTP service by specifying the `<directory>` which will be used to serve
files.
Enable TFTP service by specifying the `<directory>` which will be used to serve
files.
.. hint:: Choose your ``directory`` location carefully or you will loose the
content on image upgrades. Any directory under ``/config`` is save at this
@ -24,9 +24,9 @@ files.
.. cfgcmd:: set service tftp-server listen-address <address>
Configure the IPv4 or IPv6 listen address of the TFTP server. Multiple IPv4 and
IPv6 addresses can be given. There will be one TFTP server instances listening
on each IP address.
Configure the IPv4 or IPv6 listen address of the TFTP server. Multiple IPv4 and
IPv6 addresses can be given. There will be one TFTP server instances listening
on each IP address.
.. cfgcmd:: set service tftp-server listen-address <address> vrf <name>
@ -40,15 +40,15 @@ Additional option to run TFTP server in the :abbr:`VRF (Virtual Routing and Forw
.. cfgcmd:: set service tftp-server allow-upload
Optional, if you want to enable uploads, else TFTP server will act as read-only
server.
Optional, if you want to enable uploads, else TFTP server will act as a
read-only server.
Example
-------
Provide TFTP server listening on both IPv4 and IPv6 addresses ``192.0.2.1`` and
``2001:db8::1`` serving the content from ``/config/tftpboot``. Uploading via
TFTP to this server is not allowed!
TFTP to this server is disabled.
The resulting configuration will look like: