cloud: backport aws, azure and gcp

docs/installation/cloud/aws.rst

@@ -0,0 +1,57 @@
+##########
+Amazon AWS
+##########
+
+Deploy VM
+---------
+
+Deploy VyOS on Amazon :abbr:`AWS (Amazon Web Services)`
+
+1. Click to ``Instances`` and ``Launch Instance``
+
+.. figure:: /_static/images/cloud-aws-01.png
+
+2. On the marketplace search "VyOS"
+
+.. figure:: /_static/images/cloud-aws-02.png
+
+3. Choose the instance type. Minimum recommendation start from ``m3.medium``
+
+.. figure:: /_static/images/cloud-aws-03.png
+
+4. Configure instance for your requirements. Select number of
+   instances / network / subnet
+
+.. figure:: /_static/images/cloud-aws-04.png
+
+5. Additional storage. You can remove additional storage ``/dev/sdb``. First
+   root device will be ``/dev/xvda``. You can skeep this step.
+
+.. figure:: /_static/images/cloud-aws-05.png
+
+6. Configure Security Group. It's recommended that you configure ssh access
+   only from certain address sources. Or permit any (by default).
+
+.. figure:: /_static/images/cloud-aws-06.png
+
+7. Select SSH key pair and click ``Launch Instances``
+
+.. figure:: /_static/images/cloud-aws-07.png
+
+8. Find out your public IP address.
+
+.. figure:: /_static/images/cloud-aws-08.png
+
+9. Connect to the instance by SSH key.
+
+  .. code-block:: none
+
+    ssh -i ~/.ssh/amazon.pem vyos@203.0.113.3
+    vyos@ip-192-0-2-10:~$
+
+
+
+
+References
+----------
+https://console.aws.amazon.com/

docs/installation/cloud/azure.rst

@@ -0,0 +1,72 @@
+#####
+Azure
+#####
+
+Deploy VM
+---------
+
+Deploy VyOS on Azure.
+
+1. Go to the Azure services and Click to **Add new Virtual machine**
+
+2. Choose vm name, resource group, region and click **Browse all public and
+   private images**
+
+.. figure:: /_static/images/cloud-azure-01.png
+
+3. On the marketplace search ``VyOS`` and choose the appropriate subscription
+
+.. figure:: /_static/images/cloud-azure-02.png
+
+4. Generate new SSH key pair or use existing.
+
+.. figure:: /_static/images/cloud-azure-03.png
+
+5. Define network, subnet, Public IP. Or it will be created by default.
+
+.. figure:: /_static/images/cloud-azure-04.png
+
+6. Click ``Review + create``. After a few seconds your deployment will be complete
+
+.. figure:: /_static/images/cloud-azure-05.png
+
+7. Click to your new vm and find out your Public IP address.
+
+.. figure:: /_static/images/cloud-azure-06.png
+
+8. Connect to the instance by SSH key.
+
+  .. code-block:: none
+
+    ssh -i ~/.ssh/vyos_azure vyos@203.0.113.3
+    vyos@vyos-doc-r1:~$
+
+Add interface
+-------------
+
+If instance was deployed with one **eth0** ``WAN`` interface and want to add
+new one. To add new interface an example **eth1** ``LAN`` you need shutdown the
+instance. Attach the interface in the Azure portal and then start the instance.
+
+.. note:: Azure does not allow you attach interface when the instance in the
+   **Running** state.
+
+Absorbing Routes
+----------------
+
+If using as a router, you will want your LAN interface to absorb some or all of the traffic from your VNET by using a route table applied to the subnet.
+
+1. Create a route table and browse to **Configuration**
+
+2. Add one or more routes for networks you want to pass through the VyOS VM. Next hop type **Virtual Appliance** with the **Next Hop Address** of the VyOS ``LAN`` interface.
+
+.. note:: If you want to create a new default route for VMs on the subnet, use **Address Prefix** ``0.0.0.0/0`` Also note that if you want to use this as a typical edge device, you'll want masquerade NAT for the ``WAN`` interface.
+
+Serial Console
+--------------
+
+Azure has a way to access the serial console of a VM, but this needs to be configured on the VyOS. It's there by default, but keep it in mind if you are replacing config.boot and rebooting: ``set system console device ttyS0 speed '9600'``
+
+References
+----------
+https://azure.microsoft.com

docs/installation/cloud/gcp.rst

@@ -0,0 +1,58 @@
+#####################
+Google Cloud Platform
+#####################
+
+Deploy VM
+---------
+
+To deploy VyOS on GCP (Google Cloud Platform)
+
+1. Generate SSH key pair type **ssh-rsa** from the host that will connect to
+   VyOS.
+
+  Example:
+
+  .. code-block:: none
+
+    ssh-keygen -t rsa -f ~/.ssh/vyos_gcp -C "vyos@mypc"
+
+
+.. note:: In name "vyos@mypc" The first value must be "**vyos**". Because
+   default user is vyos and google api uses this option.
+
+
+2. Open GCP console and navigate to the menu **Metadata**. Choose
+   **SSH Keys** and click ``edit``.
+
+.. figure:: /_static/images/cloud-gcp-01.png
+
+
+Click **Add item** and paste your public ssh key. Click ``Save``.
+
+.. figure:: /_static/images/cloud-gcp-02.png
+
+
+2. On marketplace search "VyOS"
+
+3. Change Deployment name/Zone/Machine type and click ``Deploy``
+
+.. figure:: /_static/images/cloud-gcp-03.png
+
+4. After fiew seconds click to ``instance``
+
+.. figure:: /_static/images/cloud-gcp-04.png
+
+5. Find out your external IP address
+
+.. figure:: /_static/images/cloud-gcp-05.png
+
+6. Connect to the instance. SSH key was generated in the first step.
+
+  .. code-block:: none
+
+    ssh -i ~/.ssh/vyos_gcp vyos@203.0.113.3
+    vyos@vyos-r1-vm:~$
+
+References
+----------
+https://console.cloud.google.com/

docs/installation/cloud/index.rst

@@ -8,4 +8,7 @@ Running VyOS in Cloud Environments
    :maxdepth: 1
    :caption: Content
    
+   aws
+   azure
+   gcp
    cloud-init