Firewall: update firewall bridge docs, and general diagram. Add minor fix to ipv4 firewall doc, and update ipv6

docs/configuration/firewall/bridge.rst

@@ -39,4 +39,363 @@ for this layer is shown next:
 
 For traffic that needs to be forwared internally by the bridge, base chain is
 is **forward**, and it's base command for filtering is ``set firewall bridge
-forward filter ...``
+forward filter ...``, which happens in stage 4, highlightened with red color.
+
+Custom bridge firewall chains can be create with command ``set firewall bridge
+name <name> ...``. In order to use such custom chain, a rule with action jump,
+and the appropiate target should be defined in a base chain.
+
+.. note:: **Layer 3 bridge**:
+      When an IP address is assigned to the bridge interface, and if traffic
+      is sent to the router to this IP (for example using such IP as
+      default gateway), then rules defined for **bridge firewall** won't
+      match, and firewall analysis continues at **IP layer**.
+
+************
+Bridge Rules
+************
+
+For firewall filtering, firewall rules needs to be created. Each rule is
+numbered, has an action to apply if the rule is matched, and the ability
+to specify multiple criteria matchers. Data packets go through the rules
+from 1 - 999999, so order is crucial. At the first match the action of the
+rule will be executed.
+
+Actions
+=======
+
+If a rule is defined, then an action must be defined for it. This tells the
+firewall what to do if all criteria matchers defined for such rule do match.
+
+In firewall bridge rules, the action can be:
+
+   * ``accept``: accept the packet.
+
+   * ``continue``: continue parsing next rule.
+
+   * ``drop``: drop the packet.
+
+   * ``jump``: jump to another custom chain.
+
+   * ``return``: Return from the current chain and continue at the next rule
+     of the last chain.
+
+   * ``queue``: Enqueue packet to userspace.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999> action
+   [accept | continue | drop | jump | queue | return]
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999> action
+   [accept | continue | drop | jump | queue | return]
+
+   This required setting defines the action of the current rule. If action is
+   set to jump, then jump-target is also needed.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   jump-target <text>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   jump-target <text>
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   queue <0-65535>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   queue <0-65535>
+
+   To be used only when action is set to ``queue``. Use this command to specify
+   queue target to use. Queue range is also supported.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   queue-options bypass
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   queue-options bypass
+
+   To be used only when action is set to ``queue``. Use this command to let
+   packet go through firewall when no userspace software is connected to the
+   queue.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   queue-options fanout
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   queue-options fanout
+
+   To be used only when action is set to ``queue``. Use this command to
+   distribute packets between several queues.
+
+Also, **default-action** is an action that takes place whenever a packet does
+not match any rule in it's chain. For base chains, possible options for
+**default-action** are **accept** or **drop**.
+
+.. cfgcmd:: set firewall bridge forward filter default-action
+   [accept | drop]
+.. cfgcmd:: set firewall bridge name <name> default-action
+   [accept | continue | drop | jump | queue | return]
+
+   This set the default action of the rule-set if no rule matched a packet
+   criteria. If default-action is set to ``jump``, then
+   ``default-jump-target`` is also needed. Note that for base chains, default
+   action can only be set to ``accept`` or ``drop``, while on custom chain,
+   more actions are available.
+
+.. cfgcmd:: set firewall bridge name <name> default-jump-target <text>
+
+   To be used only when ``defult-action`` is set to ``jump``. Use this
+   command to specify jump target for default rule.
+
+.. note:: **Important note about default-actions:**
+   If default action for any base chain is not defined, then the default
+   action is set to **accept** for that chain. For custom chains, if default
+   action is not defined, then the default-action is set to **drop**.
+
+Firewall Logs
+=============
+
+Logging can be enable for every single firewall rule. If enabled, other
+log options can be defined.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999> log
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999> log
+
+   Enable logging for the matched packet. If this configuration command is not
+   present, then log is not enabled.
+
+.. cfgcmd:: set firewall bridge forward filter enable-default-log
+.. cfgcmd:: set firewall bridge name <name> enable-default-log
+
+   Use this command to enable the logging of the default action on
+   the specified chain.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   log-options level [emerg | alert | crit | err | warn | notice
+   | info | debug]
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   log-options level [emerg | alert | crit | err | warn | notice
+   | info | debug]
+
+   Define log-level. Only applicable if rule log is enable.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   log-options group <0-65535>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   log-options group <0-65535>
+
+   Define log group to send message to. Only applicable if rule log is enable.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   log-options snapshot-length <0-9000>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   log-options snapshot-length <0-9000>
+
+   Define length of packet payload to include in netlink message. Only
+   applicable if rule log is enable and log group is defined.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   log-options queue-threshold <0-65535>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   log-options queue-threshold <0-65535>
+
+   Define number of packets to queue inside the kernel before sending them to
+   userspace. Only applicable if rule log is enable and log group is defined.
+
+Firewall Description
+====================
+
+For reference, a description can be defined for every defined custom chain.
+
+.. cfgcmd:: set firewall bridge name <name> description <text>
+
+   Provide a rule-set description to a custom firewall chain.
+
+Rule Status
+===========
+
+When defining a rule, it is enable by default. In some cases, it is useful to
+just disable the rule, rather than removing it.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999> disable
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999> disable
+
+   Command for disabling a rule but keep it in the configuration.
+
+Matching criteria
+=================
+
+There are a lot of matching criteria against which the packet can be tested.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   destination mac-address <mac-address>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   destination mac-address <mac-address>
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   source mac-address <mac-address>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   source mac-address <mac-address>
+
+   Match criteria based on source and/or destination mac-address.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   inbound-interface name <iface>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   inbound-interface name <iface>
+
+   Match based on inbound interface. Wilcard ``*`` can be used.
+   For example: ``eth2*``. Prepending character ``!`` for inverted matching
+   criteria is also supportd. For example ``!eth2``
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   inbound-interface group <iface_group>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   inbound-interface group <iface_group>
+
+   Match based on inbound interface group. Prepending character ``!`` for
+   inverted matching criteria is also supportd. For example ``!IFACE_GROUP``
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   outbound-interface name <iface>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   outbound-interface name <iface>
+
+   Match based on outbound interface. Wilcard ``*`` can be used.
+   For example: ``eth2*``. Prepending character ``!`` for inverted matching
+   criteria is also supportd. For example ``!eth2``
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   outbound-interface group <iface_group>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   outbound-interface group <iface_group>
+
+   Match based on outbound interface group. Prepending character ``!`` for
+   inverted matching criteria is also supportd. For example ``!IFACE_GROUP``
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   vlan id <0-4096>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   vlan id <0-4096>
+
+   Match based on vlan ID. Range is also supported.
+
+.. cfgcmd:: set firewall bridge forward filter rule <1-999999>
+   vlan priority <0-7>
+.. cfgcmd:: set firewall bridge name <name> rule <1-999999>
+   vlan priority <0-7>
+
+   Match based on vlan priority(pcp). Range is also supported.
+
+***********************
+Operation-mode Firewall
+***********************
+
+Rule-set overview
+=================
+
+In this section you can find all useful firewall op-mode commands.
+
+General commands for firewall configuration, counter and statiscits:
+
+.. opcmd:: show firewall
+.. opcmd:: show firewall summary
+.. opcmd:: show firewall statistics
+
+And, to print only bridge firewall information:
+
+.. opcmd:: show firewall bridge
+.. opcmd:: show firewall bridge forward filter
+.. opcmd:: show firewall bridge forward filter rule <rule>
+.. opcmd:: show firewall bridge name <name>
+.. opcmd:: show firewall bridge name <name> rule <rule>
+
+Show Firewall log
+=================
+
+.. opcmd:: show log firewall
+.. opcmd:: show log firewall bridge
+.. opcmd:: show log firewall bridge forward
+.. opcmd:: show log firewall bridge forward filter
+.. opcmd:: show log firewall bridge name <name>
+.. opcmd:: show log firewall bridge forward filter rule <rule>
+.. opcmd:: show log firewall bridge name <name> rule <rule>
+
+   Show the logs of all firewall; show all bridge firewall logs; show all logs
+   for forward hook; show all logs for forward hook and priority filter; show
+   all logs for particular custom chain; show logs for specific Rule-Set.
+
+Example
+=======
+
+Configuration example:
+
+.. code-block:: none
+
+   set firewall bridge forward filter default-action 'drop'
+   set firewall bridge forward filter enable-default-log
+   set firewall bridge forward filter rule 10 action 'continue'
+   set firewall bridge forward filter rule 10 inbound-interface name 'eth2'
+   set firewall bridge forward filter rule 10 vlan id '22'
+   set firewall bridge forward filter rule 20 action 'drop'
+   set firewall bridge forward filter rule 20 inbound-interface group 'TRUNK-RIGHT'
+   set firewall bridge forward filter rule 20 vlan id '60'
+   set firewall bridge forward filter rule 30 action 'jump'
+   set firewall bridge forward filter rule 30 jump-target 'TEST'
+   set firewall bridge forward filter rule 30 outbound-interface name '!eth1'
+   set firewall bridge forward filter rule 35 action 'accept'
+   set firewall bridge forward filter rule 35 vlan id '11'
+   set firewall bridge forward filter rule 40 action 'continue'
+   set firewall bridge forward filter rule 40 destination mac-address '66:55:44:33:22:11'
+   set firewall bridge forward filter rule 40 source mac-address '11:22:33:44:55:66'
+   set firewall bridge name TEST default-action 'accept'
+   set firewall bridge name TEST enable-default-log
+   set firewall bridge name TEST rule 10 action 'continue'
+   set firewall bridge name TEST rule 10 log
+   set firewall bridge name TEST rule 10 vlan priority '0'
+
+And op-mode commands:
+
+.. code-block:: none
+
+      vyos@BRI:~$ show firewall bridge
+      Rulesets bridge Information
+
+      ---------------------------------
+      bridge Firewall "forward filter"
+
+      Rule     Action    Protocol      Packets    Bytes  Conditions
+      -------  --------  ----------  ---------  -------  ---------------------------------------------------------------------
+      10       continue  all                 0        0  iifname "eth2" vlan id 22  continue
+      20       drop      all                 0        0  iifname @I_TRUNK-RIGHT vlan id 60
+      30       jump      all              2130   170688  oifname != "eth1"  jump NAME_TEST
+      35       accept    all              2080   168616  vlan id 11  accept
+      40       continue  all                 0        0  ether daddr 66:55:44:33:22:11 ether saddr 11:22:33:44:55:66  continue
+      default  drop      all                 0        0
+
+      ---------------------------------
+      bridge Firewall "name TEST"
+
+      Rule     Action    Protocol      Packets    Bytes  Conditions
+      -------  --------  ----------  ---------  -------  --------------------------------------------------
+      10       continue  all              2130   170688  vlan pcp 0  prefix "[bri-NAM-TEST-10-C]"  continue
+      default  accept    all              2130   170688
+
+      vyos@BRI:~$
+      vyos@BRI:~$ show firewall bridge name TEST
+      Ruleset Information
+
+      ---------------------------------
+      bridge Firewall "name TEST"
+
+      Rule     Action    Protocol      Packets    Bytes  Conditions
+      -------  --------  ----------  ---------  -------  --------------------------------------------------
+      10       continue  all              2130   170688  vlan pcp 0  prefix "[bri-NAM-TEST-10-C]"  continue
+      default  accept    all              2130   170688
+
+      vyos@BRI:~$
+
+Inspect logs:
+
+.. code-block:: none
+
+      vyos@BRI:~$ show log firewall bridge
+      Dec 05 14:37:47 kernel: [bri-NAM-TEST-10-C]IN=eth1 OUT=eth2 ARP HTYPE=1 PTYPE=0x0800 OPCODE=1 MACSRC=50:00:00:04:00:00 IPSRC=10.11.11.101 MACDST=00:00:00:00:00:00 IPDST=10.11.11.102
+      Dec 05 14:37:48 kernel: [bri-NAM-TEST-10-C]IN=eth1 OUT=eth2 ARP HTYPE=1 PTYPE=0x0800 OPCODE=1 MACSRC=50:00:00:04:00:00 IPSRC=10.11.11.101 MACDST=00:00:00:00:00:00 IPDST=10.11.11.102
+      Dec 05 14:37:49 kernel: [bri-NAM-TEST-10-C]IN=eth1 OUT=eth2 ARP HTYPE=1 PTYPE=0x0800 OPCODE=1 MACSRC=50:00:00:04:00:00 IPSRC=10.11.11.101 MACDST=00:00:00:00:00:00 IPDST=10.11.11.102
+      ...
+      vyos@BRI:~$ show log firewall bridge forward filter
+      Dec 05 14:42:22 kernel: [bri-FWD-filter-default-D]IN=eth2 OUT=eth1 MAC=33:33:00:00:00:16:50:00:00:06:00:00:86:dd SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=96 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=ICMPv6 TYPE=143 CODE=0
+      Dec 05 14:42:22 kernel: [bri-FWD-filter-default-D]IN=eth2 OUT=eth1 MAC=33:33:00:00:00:16:50:00:00:06:00:00:86:dd SRC=0000:0000:0000:0000:0000:0000:0000:0000 DST=ff02:0000:0000:0000:0000:0000:0000:0016 LEN=96 TC=0 HOPLIMIT=1 FLOWLBL=0 PROTO=ICMPv6 TYPE=143 CODE=0

docs/configuration/firewall/ipv4.rst

@@ -123,9 +123,46 @@ The action can be :
 .. cfgcmd:: set firewall ipv4 name <name> rule <1-999999>
    jump-target <text>
 
-   To be used only when action is set to jump. Use this command to specify
+   To be used only when action is set to ``jump``. Use this command to specify
    jump target.
 
+.. cfgcmd:: set firewall ipv4 forward filter rule <1-999999>
+   queue <0-65535>
+.. cfgcmd:: set firewall ipv4 input filter rule <1-999999>
+   queue <0-65535>
+.. cfgcmd:: set firewall ipv4 output filter rule <1-999999>
+   queue <0-65535>
+.. cfgcmd:: set firewall ipv4 name <name> rule <1-999999>
+   queue <0-65535>
+
+   To be used only when action is set to ``queue``. Use this command to specify
+   queue target to use. Queue range is also supported.
+
+.. cfgcmd:: set firewall ipv4 forward filter rule <1-999999>
+   queue-options bypass
+.. cfgcmd:: set firewall ipv4 input filter rule <1-999999>
+   queue-options bypass
+.. cfgcmd:: set firewall ipv4 output filter rule <1-999999>
+   queue-options bypass
+.. cfgcmd:: set firewall ipv4 name <name> rule <1-999999>
+   queue-options bypass
+
+   To be used only when action is set to ``queue``. Use this command to let
+   packet go through firewall when no userspace software is connected to the
+   queue.
+
+.. cfgcmd:: set firewall ipv4 forward filter rule <1-999999>
+   queue-options fanout
+.. cfgcmd:: set firewall ipv4 input filter rule <1-999999>
+   queue-options fanout
+.. cfgcmd:: set firewall ipv4 output filter rule <1-999999>
+   queue-options fanout
+.. cfgcmd:: set firewall ipv4 name <name> rule <1-999999>
+   queue-options fanout
+
+   To be used only when action is set to ``queue``. Use this command to
+   distribute packets between several queues.
+
 Also, **default-action** is an action that takes place whenever a packet does
 not match any rule in it's chain. For base chains, possible options for
 **default-action** are **accept** or **drop**. 
@@ -140,7 +177,7 @@ not match any rule in it's chain. For base chains, possible options for
    [accept | drop | jump | queue | reject | return]
 
    This set the default action of the rule-set if no rule matched a packet
-   criteria. If defacult-action is set to ``jump``, then
+   criteria. If default-action is set to ``jump``, then
    ``default-jump-target`` is also needed. Note that for base chains, default
    action can only be set to ``accept`` or ``drop``, while on custom chain,
    more actions are available.
@@ -153,7 +190,7 @@ not match any rule in it's chain. For base chains, possible options for
 .. note:: **Important note about default-actions:**
    If default action for any base chain is not defined, then the default
    action is set to **accept** for that chain. For custom chains, if default
-   action is not defined, then the default-action is set to **drop**
+   action is not defined, then the default-action is set to **drop**.
 
 Firewall Logs
 =============
@@ -162,15 +199,12 @@ Logging can be enable for every single firewall rule. If enabled, other
 log options can be defined. 
 
 .. cfgcmd:: set firewall ipv4 forward filter rule <1-999999> log
-   [disable | enable]
 .. cfgcmd:: set firewall ipv4 input filter rule <1-999999> log
-   [disable | enable]
 .. cfgcmd:: set firewall ipv4 output filter rule <1-999999> log
-   [disable | enable]
 .. cfgcmd:: set firewall ipv4 name <name> rule <1-999999> log
-   [disable | enable]
 
-   Enable or disable logging for the matched packet.
+   Enable logging for the matched packet. If this configuration command is not
+   present, then log is not enabled.
 
 .. cfgcmd:: set firewall ipv4 forward filter enable-default-log
 .. cfgcmd:: set firewall ipv4 input filter enable-default-log
@@ -266,7 +300,7 @@ just disable the rule, rather than removing it.
 Matching criteria
 =================
 
-There are a lot of matching criteria against which the package can be tested.
+There are a lot of matching criteria against which the packet can be tested.
 
 .. cfgcmd:: set firewall ipv4 forward filter rule <1-999999>
    connection-status nat [destination | source]

docs/configuration/firewall/ipv6.rst

@@ -123,9 +123,46 @@ The action can be :
 .. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
    jump-target <text>
 
-   To be used only when action is set to jump. Use this command to specify
+   To be used only when action is set to ``jump``. Use this command to specify
    jump target.
 
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   queue <0-65535>
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   queue <0-65535>
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   queue <0-65535>
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   queue <0-65535>
+
+   To be used only when action is set to ``queue``. Use this command to specify
+   queue target to use. Queue range is also supported.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   queue-options bypass
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   queue-options bypass
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   queue-options bypass
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   queue-options bypass
+
+   To be used only when action is set to ``queue``. Use this command to let
+   packet go through firewall when no userspace software is connected to the
+   queue.
+
+.. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
+   queue-options fanout
+.. cfgcmd:: set firewall ipv6 input filter rule <1-999999>
+   queue-options fanout
+.. cfgcmd:: set firewall ipv6 output filter rule <1-999999>
+   queue-options fanout
+.. cfgcmd:: set firewall ipv6 name <name> rule <1-999999>
+   queue-options fanout
+
+   To be used only when action is set to ``queue``. Use this command to
+   distribute packets between several queues.
+
 Also, **default-action** is an action that takes place whenever a packet does
 not match any rule in it's chain. For base chains, possible options for
 **default-action** are **accept** or **drop**. 
@@ -140,7 +177,7 @@ not match any rule in it's chain. For base chains, possible options for
    [accept | drop | jump | queue | reject | return]
 
    This set the default action of the rule-set if no rule matched a packet
-   criteria. If defacult-action is set to ``jump``, then
+   criteria. If default-action is set to ``jump``, then
    ``default-jump-target`` is also needed. Note that for base chains, default
    action can only be set to ``accept`` or ``drop``, while on custom chain,
    more actions are available.
@@ -153,7 +190,7 @@ not match any rule in it's chain. For base chains, possible options for
 .. note:: **Important note about default-actions:**
    If default action for any base chain is not defined, then the default
    action is set to **accept** for that chain. For custom chains, if default
-   action is not defined, then the default-action is set to **drop**
+   action is not defined, then the default-action is set to **drop**.
 
 Firewall Logs
 =============
@@ -162,15 +199,12 @@ Logging can be enable for every single firewall rule. If enabled, other
 log options can be defined. 
 
 .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999> log
-   [disable | enable]
 .. cfgcmd:: set firewall ipv6 input filter rule <1-999999> log
-   [disable | enable]
 .. cfgcmd:: set firewall ipv6 output filter rule <1-999999> log
-   [disable | enable]
 .. cfgcmd:: set firewall ipv6 name <name> rule <1-999999> log
-   [disable | enable]
 
-   Enable or disable logging for the matched packet.
+   Enable logging for the matched packet. If this configuration command is not
+   present, then log is not enabled.
 
 .. cfgcmd:: set firewall ipv6 forward filter enable-default-log
 .. cfgcmd:: set firewall ipv6 input filter enable-default-log
@@ -266,7 +300,7 @@ just disable the rule, rather than removing it.
 Matching criteria
 =================
 
-There are a lot of matching criteria against which the package can be tested.
+There are a lot of matching criteria against which the packet can be tested.
 
 .. cfgcmd:: set firewall ipv6 forward filter rule <1-999999>
    connection-status nat [destination | source]
@@ -936,7 +970,7 @@ Rule-set overview
 
    .. code-block:: none
 
-      vyos@vyos:~$ show firewall 
+      vyos@vyos:~$ show firewall
       Rulesets Information
 
       ---------------------------------
@@ -999,7 +1033,7 @@ Rule-set overview
 
    .. code-block:: none
 
-      vyos@vyos:~$ show firewall summary 
+      vyos@vyos:~$ show firewall summary
       Ruleset Summary
 
       IPv6 Ruleset:
@@ -1049,29 +1083,30 @@ Rule-set overview
 
 .. opcmd:: show firewall ipv6 [forward | input | output] filter
 
-.. opcmd:: show firewall ipv4 name <name>
-
 .. opcmd:: show firewall ipv6 ipv6-name <name>
 
    This command will give an overview of a single rule-set.
 
    .. code-block:: none
 
-      vyos@vyos:~$ show firewall ipv4 input filter 
+      vyos@vyos:~$ show firewall ipv6 input filter
       Ruleset Information
 
       ---------------------------------
-      IPv4 Firewall "input filter"
+      ipv6 Firewall "input filter"
 
       Rule     Action    Protocol      Packets    Bytes  Conditions
-      -------  --------  ----------  ---------  -------  -----------------------------------------
+      -------  --------  ----------  ---------  -------  ------------------------------------------------------------------------------
-      5        jump      all                 0        0  iifname "eth2"  jump NAME_VyOS_MANAGEMENT
+      10       jump      all                13     1456  iifname "eth1"  jump NAME6_INP-ETH1
-      default  accept    all
+      20       accept    ipv6-icmp          10     1112  meta l4proto ipv6-icmp iifname "eth0"  prefix "[ipv6-INP-filter-20-A]"  accept
+      default  accept    all                14     1584
+
+      vyos@vyos:~$
 
 .. opcmd:: show firewall ipv6 [forward | input | output]
    filter rule <1-999999>
 
-.. opcmd:: show firewall ipv4 name <name> rule <1-999999>
+.. opcmd:: show firewall ipv6 name <name> rule <1-999999>
 
 .. opcmd:: show firewall ipv6 ipv6-name <name> rule <1-999999>
 
@@ -1084,7 +1119,7 @@ Rule-set overview
 
    .. code-block:: none
 
-      vyos@vyos:~$ show firewall group LAN 
+      vyos@vyos:~$ show firewall group LAN
       Firewall Groups
 
       Name          Type                References               Members
@@ -1119,45 +1154,38 @@ Example Partial Config
 
 .. code-block:: none
 
-  firewall {
+      firewall {
-      group {
+          ipv6 {
-          network-group BAD-NETWORKS {
+              input {
-              network 198.51.100.0/24
+                  filter {
-              network 203.0.113.0/24
+                      rule 10 {
-          }
+                          action jump
-          network-group GOOD-NETWORKS {
+                          inbound-interface {
-              network 192.0.2.0/24
+                              name eth1
-          }
-          port-group BAD-PORTS {
-              port 65535
-          }
-      }
-      ipv4 {
-          forward {
-              filter {
-                  default-action accept
-                  rule 5 {
-                      action accept
-                      source {
-                          group {
-                              network-group GOOD-NETWORKS
                           }
+                          jump-target INP-ETH1
+                      }
+                      rule 20 {
+                          action accept
+                          inbound-interface {
+                              name eth0
+                          }
+                          log
+                          protocol ipv6-icmp
                       }
                   }
+              }
+              name INP-ETH1 {
+                  default-action drop
+                  enable-default-log
                   rule 10 {
-                      action drop
+                      action accept
-                      description "Bad Networks"
+                      protocol tcp_udp
-                      protocol all
-                      source {
-                          group {
-                              network-group BAD-NETWORKS
-                          }
-                      }
                   }
               }
           }
       }
-  }
+
 
 Update geoip database
 =====================