vyos/vyos-documentation
1
0
Fork 0
mirror of https://github.com/vyos/vyos-documentation.git synced 2025-10-26 08:41:46 +01:00
Code Issues Packages Projects Releases Wiki Activity

ospfv3 /mpls : worng commannds and description

Browse Source
This commit is contained in:
fett0 2022-08-25 17:03:55 -03:00
parent 3c37e69994
commit 6b99162a0b
2 changed files with 15 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/configuration/protocols/mpls.rst
View File

@ -27,12 +27,14 @@ network transport of data packets.
For more information on how MPLS label switching works, please go visit
`Wikipedia (MPLS)`_.
.. note:: MPLS support in VyOS is not finished yet, and therefore its
functionality is limited. Currently there is no support for MPLS enabled VPN
services such as L3VPNs, L2VPNs, and mVPNs. RSVP support is also not present
as the underlying routing stack (FRR) does not implement it. Currently VyOS
can be configured as a label switched router (MPLS P router), in both
penultimate and ultimate hop popping operations.
.. note:: MPLS support in VyOS is not finished yet, and therefore its
functionality is limited. Currently there is no support for MPLS enabled VPN
services such as L2VPNs and mVPNs. RSVP support is also not present as the
underlying routing stack (FRR) does not implement it. Currently VyOS
implements LDP as described in RFC 5036; other LDP standard are the
following ones: RFC 6720, RFC 6667, RFC 5919, RFC 5561, RFC 7552, RFC 4447.
Because MPLS is already available (FRR also supports RFC 3031).
Label Distribution Protocol
===========================

14
docs/configuration/protocols/ospf.rst
View File

@ -790,7 +790,7 @@ General
VyOS does not have a special command to start the OSPFv3 process. The OSPFv3
process starts when the first ospf enabled interface is configured.
.. cfgcmd:: set protocols ospfv3 area <number> interface <interface>
.. cfgcmd:: set protocols ospfv3 interface <interface> area <number>
This command specifies the OSPFv3 enabled interface. This command is also
used to enable the OSPF process. The area number can be specified in
@ -987,7 +987,7 @@ A typical configuration using 2 nodes.
.. code-block:: none
set protocols ospfv3 area 0.0.0.0 interface eth1
set protocols ospfv3 interface eth1 area 0.0.0.0
set protocols ospfv3 area 0.0.0.0 range 2001:db8:1::/64
set protocols ospfv3 parameters router-id 192.168.1.1
set protocols ospfv3 redistribute connected
@ -996,7 +996,7 @@ A typical configuration using 2 nodes.
.. code-block:: none
set protocols ospfv3 area 0.0.0.0 interface eth1
set protocols ospfv3 interface eth1 area 0.0.0.0
set protocols ospfv3 area 0.0.0.0 range 2001:db8:2::/64
set protocols ospfv3 parameters router-id 192.168.2.1
set protocols ospfv3 redistribute connected
@ -1025,8 +1025,8 @@ Example configuration for WireGuard interfaces:
set interfaces wireguard wg01 peer ospf02 pubkey 'ie3...='
set interfaces wireguard wg01 port '12345'
set protocols ospfv3 parameters router-id 192.168.1.1
set protocols ospfv3 area 0.0.0.0 interface 'wg01'
set protocols ospfv3 area 0.0.0.0 interface 'lo'
set protocols ospfv3 interface 'wg01' area 0.0.0.0
set protocols ospfv3 interface 'lo' area 0.0.0.0
**Node 2**
@ -1040,8 +1040,8 @@ Example configuration for WireGuard interfaces:
set interfaces wireguard wg01 peer ospf01 pubkey 'NHI...='
set interfaces wireguard wg01 port '12345'
set protocols ospfv3 parameters router-id 192.168.1.2
set protocols ospfv3 area 0.0.0.0 interface 'wg01'
set protocols ospfv3 area 0.0.0.0 interface 'lo'
set protocols ospfv3 interface 'wg01' area 0.0.0.0
set protocols ospfv3 interface 'lo' area 0.0.0.0
**Status**