vyos/vyos-documentation
1
0
Fork 0
mirror of https://github.com/vyos/vyos-documentation.git synced 2025-12-20 20:42:11 +01:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #1147 from indrajitr/avahi-doc

Browse Source 
mdns: T5227, T5615, T5719: Update mDNS documentation for additional options
This commit is contained in:
Robert Göhler 2023-11-12 21:16:22 +01:00 committed by GitHub
commit 611faea0a8
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 58 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

69
docs/configuration/service/mdns.rst
View File

@ -5,33 +5,49 @@ Starting with VyOS 1.2 a :abbr:`mDNS (Multicast DNS)` repeater functionality is
provided. Additional information can be obtained from
https://en.wikipedia.org/wiki/Multicast_DNS.
Multicast DNS uses the 224.0.0.251 address, which is "administratively scoped"
and does not leave the subnet. It retransmits mDNS packets from one interface
to other interfaces. This enables support for e.g. Apple Airplay devices across
multiple VLANs.
Multicast DNS uses the reserved address ``224.0.0.251``, which is
`"administratively scoped"` and does not leave the subnet. mDNS repeater
retransmits mDNS packets from one interface to other interfaces. This enables
support for devices using mDNS discovery (like network printers, Apple Airplay,
Chromecast, various IP based home-automation devices etc) across multiple VLANs.
Since the mDNS protocol sends the AA records in the packet itself, the repeater
does not need to forge the source address. Instead, the source address is of
the interface that repeats the packet.
Since the mDNS protocol sends the :abbr:`AA(Authoritative Answer)` records in
the packet itself, the repeater does not need to forge the source address.
Instead, the source address is of the interface that repeats the packet.
Configuration
=============
.. cfgcmd:: set service mdns repeater interface <interface>
To enable mDNS repeater you need to configure at least two interfaces. To
re-broadcast all incoming mDNS packets from any interface configured here to
any other interface configured under this section.
To enable mDNS repeater you need to configure at least two interfaces so that
all incoming mDNS packets from one interface configured here can be
re-broadcasted to any other interface(s) configured under this section.
.. cfgcmd:: set service mdns repeater disable
mDNS repeater can be temporarily disabled without deleting the service using
.. cfgcmd:: set service mdns repeater ip-version <ipv4 | ipv6 | both>
mDNS repeater can be enabled either on IPv4 socket or on IPv6 socket or both
to re-broadcast. By default, mDNS repeater will listen on both IPv4 and IPv6.
.. cfgcmd:: set service mdns repeater allow-service <service>
mDNS repeater can be configured to re-broadcast only specific services. By
default, all services are re-broadcasted.
.. cfgcmd:: set service mdns repeater browse-domain <domain>
Allow listing additional custom domains to be browsed (in addition to the
default ``local``) so that they can be reflected.
.. note:: You can not run this in a VRRP setup, if multiple mDNS repeaters
are launched in a subnet you will experience the mDNS packet storm death!
Example
=======
-------
To listen on both `eth0` and `eth1` mDNS packets and also repeat packets
received on `eth0` to `eth1` (and vice-versa) use the following commands:
@ -41,4 +57,35 @@ received on `eth0` to `eth1` (and vice-versa) use the following commands:
set service mdns repeater interface 'eth0'
set service mdns repeater interface 'eth1'
To allow only specific services, for example ``_airplay._tcp`` or ``_ipp._tcp``,
(instead of all services) to be re-broadcasted, use the following command:
.. code-block:: none
set service mdns repeater allow-service '_airplay._tcp'
set service mdns repeater allow-service '_ipp._tcp'
To allow listing additional custom domain, for example
``openthread.thread.home.arpa``, so that it can reflected in addition to the
default ``local``, use the following command:
.. code-block:: none
set service mdns repeater browse-domain 'openthread.thread.home.arpa'
.. _`Multicast DNS`: https://en.wikipedia.org/wiki/Multicast_DNS
Operation
=========
.. opcmd:: restart mdns repeater
Restart mDNS repeater service.
.. opcmd:: show log mdns repeater
Show logs for mDNS repeater service.
.. opcmd:: monitor log mdns repeater
Follow the logs for mDNS repeater service.