mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-10-26 08:41:46 +01:00
vxlan: use documented section style guide
This commit is contained in:
parent
158b50d247
commit
5a09b36ecb
@ -1,7 +1,8 @@
|
|||||||
.. _vxlan-interface:
|
.. _vxlan-interface:
|
||||||
|
|
||||||
|
#####
|
||||||
VXLAN
|
VXLAN
|
||||||
-----
|
#####
|
||||||
|
|
||||||
:abbr:`VXLAN (Virtual Extensible LAN)` is a network virtualization technology
|
:abbr:`VXLAN (Virtual Extensible LAN)` is a network virtualization technology
|
||||||
that attempts to address the scalability problems associated with large cloud
|
that attempts to address the scalability problems associated with large cloud
|
||||||
@ -33,7 +34,7 @@ may be blocked by the hypervisor.
|
|||||||
per VXLAN interface basis to get it working accross multiple vendors.
|
per VXLAN interface basis to get it working accross multiple vendors.
|
||||||
|
|
||||||
Multicast VXLAN
|
Multicast VXLAN
|
||||||
^^^^^^^^^^^^^^^^
|
===============
|
||||||
|
|
||||||
Example Topology:
|
Example Topology:
|
||||||
|
|
||||||
@ -65,8 +66,8 @@ For optimal scalability Multicast shouldn't be used at all, but instead use BGP
|
|||||||
to signal all connected devices between leafs. Unfortunately, VyOS does not yet
|
to signal all connected devices between leafs. Unfortunately, VyOS does not yet
|
||||||
support this.
|
support this.
|
||||||
|
|
||||||
Configuration commands
|
Configuration
|
||||||
^^^^^^^^^^^^^^^^^^^^^^
|
=============
|
||||||
|
|
||||||
.. code-block:: none
|
.. code-block:: none
|
||||||
|
|
||||||
@ -83,8 +84,8 @@ Configuration commands
|
|||||||
remote # Remote address of the VXLAN tunnel, used for PTP instead of multicast
|
remote # Remote address of the VXLAN tunnel, used for PTP instead of multicast
|
||||||
vni <1-16777215> # Virtual Network Identifier (required)
|
vni <1-16777215> # Virtual Network Identifier (required)
|
||||||
|
|
||||||
Configuration Example
|
Example
|
||||||
^^^^^^^^^^^^^^^^^^^^^
|
-------
|
||||||
|
|
||||||
The setup is this:
|
The setup is this:
|
||||||
|
|
||||||
@ -239,7 +240,7 @@ configuration directive to support a user-specified destination port to override
|
|||||||
that behavior is available using the above command.
|
that behavior is available using the above command.
|
||||||
|
|
||||||
Older Examples
|
Older Examples
|
||||||
^^^^^^^^^^^^^^
|
--------------
|
||||||
|
|
||||||
Example for bridging normal L2 segment and vxlan overlay network, and using a
|
Example for bridging normal L2 segment and vxlan overlay network, and using a
|
||||||
vxlan interface as routing interface.
|
vxlan interface as routing interface.
|
||||||
@ -304,7 +305,7 @@ gateway. You can add an IP to a bridge to create a gateway.
|
|||||||
}
|
}
|
||||||
|
|
||||||
Unicast VXLAN
|
Unicast VXLAN
|
||||||
^^^^^^^^^^^^^
|
=============
|
||||||
|
|
||||||
Alternative to multicast, the remote IPv4 address of the VXLAN tunnel can set directly.
|
Alternative to multicast, the remote IPv4 address of the VXLAN tunnel can set directly.
|
||||||
Let's change the Multicast example from above:
|
Let's change the Multicast example from above:
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user