vyos/vyos-documentation
1
0
Fork 0
mirror of https://github.com/vyos/vyos-documentation.git synced 2025-10-26 08:41:46 +01:00
Code Issues Packages Projects Releases Wiki Activity

ospf: reword using 80 character line breaks

Browse Source
This commit is contained in:
Christian Poessinger 2019-11-17 20:09:07 +01:00
parent 813a89208a
commit 4e3fd8b583
1 changed files with 14 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
docs/routing/ospf.rst
View File

@ -1,21 +1,23 @@
.. _routing-ospf:
Open Shortest Path First (OSPF)
-------------------------------
OSPF
----
Open Shortest Path First (OSPF) is a routing protocol for Internet Protocol
(IP) networks. It uses a link state routing (LSR) algorithm and falls into the
group of interior gateway protocols (IGPs), operating within a single autonomous
system (AS). It is defined as OSPF Version 2 in RFC2328_ (1998) for IPv4. Updates
for IPv6 are specified as OSPF Version 3 in RFC5340_ (2008). OSPF supports the
Classless Inter-Domain Routing (CIDR) addressing model.
:abbr:`OSPF (Open Shortest Path First)` is a routing protocol for Internet
Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls
into the group of interior gateway protocols (IGPs), operating within a single
autonomous system (AS). It is defined as OSPF Version 2 in :rfc:`2328` (1998)
for IPv4. Updates for IPv6 are specified as OSPF Version 3 in :rfc:`5340`
(2008). OSPF supports the :abbr:`CIDR (Classless Inter-Domain Routing)`
addressing model.
OSPF is a widely used IGP in large enterprise networks.
OSPFv2 (IPv4)
^^^^^^^^^^^^^
In order to have a VyOS system exchanging routes with OSPF neighbors, you will at least need to configure the area and a network,
In order to have a VyOS system exchanging routes with OSPF neighbors, you will
at least need to configure the area and a network,
.. code-block:: sh
@ -29,7 +31,8 @@ as well as the router ID.
That is the minimum configuration you will need.
Below you can see a typical configuration using 2 nodes, redistribute loopback address and the node 1 sending the default route:
Below you can see a typical configuration using 2 nodes, redistribute loopback
address and the node 1 sending the default route:
**Node 1**
@ -133,7 +136,5 @@ Example configuration for WireGuard interfaces:
Neighbor ID Pri DeadTime State/IfState Duration I/F[State]
192.168.0.1 1 00:00:39 Full/PointToPoint 00:19:44 wg01[PointToPoint]
.. _RFC2328: https://tools.ietf.org/html/rfc2328
.. _RFC5340: https://tools.ietf.org/html/rfc2340
.. _T1483: https://phabricator.vyos.net/T1483