vyos/vyos-documentation
1
0
Fork 0
mirror of https://github.com/vyos/vyos-documentation.git synced 2025-10-26 08:41:46 +01:00
Code Issues Packages Projects Releases Wiki Activity

pppoe: restructure op-mode examples

Browse Source
This commit is contained in:
Christian Poessinger 2019-11-24 20:24:35 +01:00
parent d9c14434ab
commit 46fa911c52
1 changed files with 19 additions and 37 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
docs/interfaces/pppoe.rst
View File

@ -16,7 +16,7 @@ predominately via the PAP protocol and less often via CHAP.
Operating Modes Operating Modes
--------------- ---------------
VyOS supports setting up PPPoe in two different ways to a PPPoE internet VyOS supports setting up PPPoE in two different ways to a PPPoE internet
connection. This is due to most ISPs provide a modem that is also a wireless connection. This is due to most ISPs provide a modem that is also a wireless
router. router.
@ -97,9 +97,9 @@ assigning it to the pppoe0 itself as shown here:
VLAN Example VLAN Example
++++++++++++ ++++++++++++
Some recent ISPs require you to build the PPPoe connection through a VLAN Some recent ISPs require you to build the PPPoE connection through a VLAN
interface. One of those ISPs is e.g. Deutsche Telekom in Germany. VyOS interface. One of those ISPs is e.g. Deutsche Telekom in Germany. VyOS
can easily create a PPPoe session through an encapsulated VLAN interface. can easily create a PPPoE session through an encapsulated VLAN interface.
The following configuration will run your PPPoE connection through VLAN7 The following configuration will run your PPPoE connection through VLAN7
which is the default VLAN for Deutsche Telekom: which is the default VLAN for Deutsche Telekom:
@ -118,46 +118,28 @@ which is the default VLAN for Deutsche Telekom:
Troubleshooting Troubleshooting
--------------- ---------------
Connect/Disconnect .. opcmd:: disconnect interface <interface>
******************
You can test connecting and disconnecting with the below commands issued Test disconnecting given connection-oriented interface. `<interface>` can be
on the operational level of your VyOS isntallation: ``pppoe0`` as example.
.. code-block:: sh .. opcmd:: connect interface <interface>
disconnect interface 0 Test connecting given connection-oriented interface. `<interface>` can be
connect interface 0 ``pppoe0`` as example.
Logs .. opcmd:: show interfaces pppoe <interface>
****
You can check the PPPoE connection logs with the following command which Check PPPoE connection logs with the following command which shows the current
shows the current statistics, status and some of the settings (i.e. MTU) statistics, status and some of the settings (i.e. MTU) for the current
for the current connection on pppoe0. connection on <interface> (e.g. ``pppoe0``)
.. code-block:: sh .. opcmd:: show interfaces pppoe <interface> log
show interfaces pppoe 0 Show entire log for the PPPoE connection starting with the oldest data. Scroll
down with the <space> key to reach the end where the current data is.
Full Log .. opcmd:: show interfaces pppoe <interface> log tail
~~~~~~~~
This command shows the entire log for the PPPoE connection starting with the Shows the same log as without the 'tail' option but start with the last few
oldest data. Scroll down with the <space> key to reach the end where the lines and continues to show added lines until you exit with ``Ctrl + x``
current data is.
.. code-block:: sh
show interfaces pppoe 0 log
Recent Log
~~~~~~~~~~
This command shows the same log as without the 'tail' option but only starts
with the last few lines and continues to show added lines until you exit with
``Ctrl + x``
.. code-block:: sh
show interfaces pppoe 0 log tail