wifi: add infos about Intel AX200 card

This commit is contained in:
Christian Poessinger 2022-07-04 19:38:21 +02:00
parent 44b2e41714
commit 38f0adb324
2 changed files with 23 additions and 0 deletions

View File

@ -590,3 +590,24 @@ To get it to work as an access point with this configuration you will need
to set up a DHCP server to work with that network. You can - of course - also
bridge the Wireless interface with any configured bridge
(:ref:`bridge-interface`) on the system.
.. _wireless-interface-intel-ax200:
Intel AX200
===========
The Intel AX200 card does not work out of the box in AP mode, see
https://unix.stackexchange.com/questions/598275/intel-ax200-ap-mode. You can
still put this card into AP mode using the following configuration:
.. stop_vyoslinter
.. code-block:: none
set interfaces wireless wlan0 channel '1'
set interfaces wireless wlan0 country-code 'us'
set interfaces wireless wlan0 mode 'n'
set interfaces wireless wlan0 physical-device 'phy0'
set interfaces wireless wlan0 ssid 'VyOS'
set interfaces wireless wlan0 type 'access-point'
.. start_vyoslinter

View File

@ -115,6 +115,8 @@ Refer to :ref:`wireless-interface` for additional information, below listed
modules have been tested successfully on this Hardware platform:
* Compex WLE900VX mini-PCIe WiFi module, only supported in mPCIe slot 1.
* Intel Corporation AX200 mini-PCIe WiFi module, only supported in mPCIe slot 1.
(see :ref:`wireless-interface-intel-ax200`)
WWAN
""""