vyos/vyos-documentation
1
0
Fork 0
mirror of https://github.com/vyos/vyos-documentation.git synced 2025-10-26 08:41:46 +01:00
Code Issues Packages Projects Releases Wiki Activity

pppoe: correct spelling and grammar

Browse Source
This commit is contained in:
rebortg 2021-07-09 21:15:57 +02:00
parent 1fee56ba74
commit 380db029d2
1 changed files with 8 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/configuration/interfaces/pppoe.rst
View File

@ -1,3 +1,5 @@
:lastproofread: 2021-07-09
.. _pppoe-interface: .. _pppoe-interface:
##### #####
@ -19,7 +21,7 @@ Operating Modes
*************** ***************
VyOS supports setting up PPPoE in two different ways to a PPPoE internet VyOS supports setting up PPPoE in two different ways to a PPPoE internet
connection. This is due to most ISPs provide a modem that is also a wireless connection. This is because most ISPs provide a modem that is also a wireless
router. router.
Home Users Home Users
@ -45,7 +47,7 @@ your DSL Modem/Router switch into a Bridged Mode so it only acts as a DSL
Transceiver device to connect between the Ethernet link of your VyOS and the Transceiver device to connect between the Ethernet link of your VyOS and the
phone cable. Once your DSL Transceiver is in Bridge Mode, you should get no phone cable. Once your DSL Transceiver is in Bridge Mode, you should get no
IP address from it. Please make sure you connect to the Ethernet Port 1 if IP address from it. Please make sure you connect to the Ethernet Port 1 if
your DSL Transeiver has a switch, as some of them only work this way. your DSL Transceiver has a switch, as some of them only work this way.
Once you have an Ethernet device connected, i.e. `eth0`, then you can Once you have an Ethernet device connected, i.e. `eth0`, then you can
configure it to open the PPPoE session for you and your DSL Transceiver configure it to open the PPPoE session for you and your DSL Transceiver
@ -101,7 +103,7 @@ PPPoE options
When set the interface is enabled for "dial-on-demand". When set the interface is enabled for "dial-on-demand".
Use this command to instruct the system to establish a PPPoE connections Use this command to instruct the system to establish a PPPoE connection
automatically once traffic passes through the interface. A disabled on-demand automatically once traffic passes through the interface. A disabled on-demand
connection is established at boot time and remains up. If the link fails for connection is established at boot time and remains up. If the link fails for
any reason, the link is brought back up immediately. any reason, the link is brought back up immediately.
@ -225,12 +227,12 @@ Connect/Disconnect
.. opcmd:: disconnect interface <interface> .. opcmd:: disconnect interface <interface>
Test disconnecting given connection-oriented interface. `<interface>` can be Test disconnecting given connection-oriented interface. `<interface>` can be
``pppoe0`` as example. ``pppoe0`` as the example.
.. opcmd:: connect interface <interface> .. opcmd:: connect interface <interface>
Test connecting given connection-oriented interface. `<interface>` can be Test connecting given connection-oriented interface. `<interface>` can be
``pppoe0`` as example. ``pppoe0`` as the example.
******* *******
Example Example
@ -253,7 +255,7 @@ Requirements:
change the ``default-route`` option to ``force``. You could also install change the ``default-route`` option to ``force``. You could also install
a static route and set the ``default-route`` option to ``none``. a static route and set the ``default-route`` option to ``none``.
* With the ``name-server`` option set to ``none``, VyOS will ignore the * With the ``name-server`` option set to ``none``, VyOS will ignore the
nameservers your ISP sens you and thus you can fully rely on the ones you nameservers your ISP sends you and thus you can fully rely on the ones you
have configured statically. have configured statically.
.. note:: Syntax has changed from VyOS 1.2 (crux) and it will be automatically .. note:: Syntax has changed from VyOS 1.2 (crux) and it will be automatically