mirror of
https://github.com/vyos/vyos-documentation.git
synced 2025-11-04 00:02:05 +01:00
pim: igmp: T5733: adjust to latest CLI syntax
(cherry picked from commit 2de650e60c84c70e26cc02341c07fe84e6d1c1fa)
This commit is contained in:
Christian Breunig
parent
d0c971118c
commit
21f0d774b5
77
docs/configuration/protocols/igmp-proxy.rst
Normal file
77
docs/configuration/protocols/igmp-proxy.rst
Normal file
@ -0,0 +1,77 @@
|
||||
:lastproofread: 2023-11-13
|
||||
|
||||
.. _igmp_proxy:
|
||||
|
||||
##########
|
||||
IGMP Proxy
|
||||
##########
|
||||
|
||||
:abbr:`IGMP (Internet Group Management Protocol)` proxy sends IGMP host messages
|
||||
on behalf of a connected client. The configuration must define one, and only one
|
||||
upstream interface, and one or more downstream interfaces.
|
||||
|
||||
Configuration
|
||||
=============
|
||||
|
||||
.. cfgcmd:: set protocols igmp-proxy interface <interface> role
|
||||
<upstream | downstream>
|
||||
|
||||
* **upstream:** The upstream network interface is the outgoing interface
|
||||
which is responsible for communicating to available multicast data sources.
|
||||
There can only be one upstream interface.
|
||||
|
||||
* **downstream:** Downstream network interfaces are the distribution
|
||||
interfaces to the destination networks, where multicast clients can join
|
||||
groups and receive multicast data. One or more downstream interfaces must
|
||||
be configured.
|
||||
|
||||
.. cfgcmd:: set protocols igmp-proxy interface <interface> alt-subnet <network>
|
||||
|
||||
Defines alternate sources for multicasting and IGMP data. The network address
|
||||
must be on the following format 'a.b.c.d/n'. By default, the router will
|
||||
accept data from sources on the same network as configured on an interface.
|
||||
If the multicast source lies on a remote network, one must define from where
|
||||
traffic should be accepted.
|
||||
|
||||
This is especially useful for the upstream interface, since the source for
|
||||
multicast traffic is often from a remote location.
|
||||
|
||||
This option can be supplied multiple times.
|
||||
|
||||
.. cfgcmd:: set protocols igmp-proxy disable-quickleave
|
||||
|
||||
Disables quickleave mode. In this mode the daemon will not send a Leave IGMP
|
||||
message upstream as soon as it receives a Leave message for any downstream
|
||||
interface. The daemon will not ask for Membership reports on the downstream
|
||||
interfaces, and if a report is received the group is not joined again the
|
||||
upstream.
|
||||
|
||||
If it's vital that the daemon should act exactly like a real multicast client
|
||||
on the upstream interface, this function should be enabled.
|
||||
|
||||
Enabling this function increases the risk of bandwidth saturation.
|
||||
|
||||
.. cfgcmd:: set protocols igmp-proxy disable
|
||||
|
||||
Disable this service.
|
||||
|
||||
.. _igmp:proxy_example:
|
||||
|
||||
Example
|
||||
-------
|
||||
|
||||
Interface `eth1` LAN is behind NAT. In order to subscribe `10.0.0.0/23` subnet
|
||||
multicast which is in `eth0` WAN we need to configure igmp-proxy.
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
set protocols igmp-proxy interface eth0 role upstream
|
||||
set protocols igmp-proxy interface eth0 alt-subnet 10.0.0.0/23
|
||||
set protocols igmp-proxy interface eth1 role downstream
|
||||
|
||||
Operation
|
||||
=========
|
||||
|
||||
.. opcmd:: restart igmp-proxy
|
||||
|
||||
Restart the IGMP proxy process.
|
||||
@ -1,249 +0,0 @@
|
||||
:lastproofread: 2023-01-27
|
||||
|
||||
.. _multicast:
|
||||
|
||||
#########
|
||||
Multicast
|
||||
#########
|
||||
|
||||
VyOS facilitates IP Multicast by supporting **PIM Sparse Mode**,
|
||||
**IGMP** and **IGMP-Proxy**.
|
||||
|
||||
************
|
||||
PIM and IGMP
|
||||
************
|
||||
|
||||
PIM (Protocol Independent Multicast) must be configured in every
|
||||
interface of every participating router. Every router must also have the
|
||||
location of the Rendevouz Point manually configured. Then,
|
||||
unidirectional shared trees rooted at the Rendevouz Point will
|
||||
automatically be built for multicast distribution.
|
||||
|
||||
Traffic from multicast sources will go to the Rendezvous Point, and
|
||||
receivers will pull it from a shared tree using IGMP (Internet Group
|
||||
Management Protocol).
|
||||
|
||||
Multicast receivers will talk IGMP to their local router, so, besides
|
||||
having PIM configured in every router, IGMP must also be configured in
|
||||
any router where there could be a multicast receiver locally connected.
|
||||
|
||||
VyOS supports both IGMP version 2 and version 3 (which allows
|
||||
source-specific multicast).
|
||||
|
||||
|
||||
Example
|
||||
=======
|
||||
|
||||
In the following example we can see a basic multicast setup:
|
||||
|
||||
.. image:: /_static/images/multicast-basic.png
|
||||
:width: 90%
|
||||
:align: center
|
||||
:alt: Network Topology Diagram
|
||||
|
||||
|
||||
|
||||
**Router 1**
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
set interfaces ethernet eth2 address '172.16.0.2/24'
|
||||
set interfaces ethernet eth1 address '100.64.0.1/24'
|
||||
set protocols ospf area 0 network '172.16.0.0/24'
|
||||
set protocols ospf area 0 network '100.64.0.0/24'
|
||||
set protocols igmp interface eth1
|
||||
set protocols pim interface eth1
|
||||
set protocols pim interface eth2
|
||||
set protocols pim rp address 172.16.255.1 group '224.0.0.0/4'
|
||||
|
||||
**Router 3**
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
set interfaces dummy dum0 address '172.16.255.1/24'
|
||||
set interfaces ethernet eth0 address '172.16.0.1/24'
|
||||
set interfaces ethernet eth1 address '172.16.1.1/24'
|
||||
set protocols ospf area 0 network '172.16.0.0/24'
|
||||
set protocols ospf area 0 network '172.16.255.0/24'
|
||||
set protocols ospf area 0 network '172.16.1.0/24'
|
||||
set protocols pim interface dum0
|
||||
set protocols pim interface eth0
|
||||
set protocols pim interface eth1
|
||||
set protocols pim rp address 172.16.255.1 group '224.0.0.0/4'
|
||||
|
||||
**Router 2**
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
set interfaces ethernet eth1 address '10.0.0.1/24'
|
||||
set interfaces ethernet eth2 address '172.16.1.2/24'
|
||||
set protocols ospf area 0 network '10.0.0.0/24'
|
||||
set protocols ospf area 0 network '172.16.1.0/24'
|
||||
set protocols pim interface eth1
|
||||
set protocols pim interface eth2
|
||||
set protocols pim rp address 172.16.255.1 group '224.0.0.0/4'
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Basic commands
|
||||
==============
|
||||
|
||||
These are the commands for a basic setup.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface-name>
|
||||
|
||||
Use this command to enable PIM in the selected interface so that it
|
||||
can communicate with PIM neighbors.
|
||||
|
||||
|
||||
.. cfgcmd:: set protocols pim rp address <address> group
|
||||
<multicast-address/mask-bits>
|
||||
|
||||
Use this command to manually configure a Rendezvous Point for PIM so
|
||||
that join messages can be sent there. Set the Rendevouz Point address
|
||||
and the matching prefix of group ranges covered. These values must
|
||||
be shared with every router participating in the PIM network.
|
||||
|
||||
|
||||
.. cfgcmd:: set protocols igmp interface eth1
|
||||
|
||||
Use this command to configure an interface with IGMP so that PIM can
|
||||
receive IGMP reports and query on the selected interface. By default
|
||||
IGMP version 3 will be used.
|
||||
|
||||
|
||||
|
||||
Tuning commands
|
||||
===============
|
||||
|
||||
You can also tune multicast with the following commands.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> dr-priority <value>
|
||||
|
||||
Use this PIM command in the selected interface to set the priority
|
||||
(1-4294967295) you want to influence in the election of a node to
|
||||
become the Designated Router for a LAN segment. The default priority
|
||||
is 1, set a higher value to give the router more preference in the
|
||||
DR election process.
|
||||
|
||||
|
||||
.. cfgcmd:: set protocols pim int <interface> hello <seconds>
|
||||
|
||||
Use this command to configure the PIM hello interval in seconds
|
||||
(1-180) for the selected interface.
|
||||
|
||||
|
||||
.. cfgcmd:: set protocols pim rp keep-alive-timer <seconds>
|
||||
|
||||
Use this PIM command to modify the time out value (31-60000
|
||||
seconds) for an `(S,G) <https://tools.ietf.org/html/rfc7761#section-4.1>`_
|
||||
flow. 31 seconds is chosen for a lower bound as some hardware
|
||||
platforms cannot see data flowing in better than 30 seconds chunks.
|
||||
|
||||
|
||||
.. cfgcmd:: set protocols igmp interface <interface> join <multicast-address>
|
||||
source <IP-address>
|
||||
|
||||
Use this command to allow the selected interface to join a multicast
|
||||
group defining the multicast address you want to join and the source
|
||||
IP address too.
|
||||
|
||||
|
||||
.. cfgcmd:: set protocols igmp interface <interface> query-interval <seconds>
|
||||
|
||||
Use this command to configure in the selected interface the IGMP
|
||||
host query interval (1-1800) in seconds that PIM will use.
|
||||
|
||||
|
||||
.. cfgcmd:: set protocols igmp interface <interface> query-max-response-time
|
||||
<deciseconds>
|
||||
|
||||
Use this command to configure in the selected interface the IGMP
|
||||
query response timeout value (10-250) in deciseconds. If a report is
|
||||
not returned in the specified time, it will be assumed the `(S,G) or
|
||||
(*,G) state <https://tools.ietf.org/html/rfc7761#section-4.1>`_ has
|
||||
timed out.
|
||||
|
||||
|
||||
.. cfgcmd:: set protocols igmp interface <interface> version <version-number>
|
||||
|
||||
Use this command to define in the selected interface whether you
|
||||
choose IGMP version 2 or 3. The default value is 3.
|
||||
|
||||
|
||||
|
||||
**********
|
||||
IGMP Proxy
|
||||
**********
|
||||
|
||||
:abbr:`IGMP (Internet Group Management Protocol)` proxy sends IGMP host messages
|
||||
on behalf of a connected client. The configuration must define one, and only one
|
||||
upstream interface, and one or more downstream interfaces.
|
||||
|
||||
Configuration
|
||||
=============
|
||||
|
||||
.. cfgcmd:: set protocols igmp-proxy interface <interface> role
|
||||
<upstream | downstream>
|
||||
|
||||
* **upstream:** The upstream network interface is the outgoing interface
|
||||
which is responsible for communicating to available multicast data sources.
|
||||
There can only be one upstream interface.
|
||||
|
||||
* **downstream:** Downstream network interfaces are the distribution
|
||||
interfaces to the destination networks, where multicast clients can join
|
||||
groups and receive multicast data. One or more downstream interfaces must
|
||||
be configured.
|
||||
|
||||
.. cfgcmd:: set protocols igmp-proxy interface <interface> alt-subnet <network>
|
||||
|
||||
Defines alternate sources for multicasting and IGMP data. The network address
|
||||
must be on the following format 'a.b.c.d/n'. By default, the router will
|
||||
accept data from sources on the same network as configured on an interface.
|
||||
If the multicast source lies on a remote network, one must define from where
|
||||
traffic should be accepted.
|
||||
|
||||
This is especially useful for the upstream interface, since the source for
|
||||
multicast traffic is often from a remote location.
|
||||
|
||||
This option can be supplied multiple times.
|
||||
|
||||
.. cfgcmd:: set protocols igmp-proxy disable-quickleave
|
||||
|
||||
Disables quickleave mode. In this mode the daemon will not send a Leave IGMP
|
||||
message upstream as soon as it receives a Leave message for any downstream
|
||||
interface. The daemon will not ask for Membership reports on the downstream
|
||||
interfaces, and if a report is received the group is not joined again the
|
||||
upstream.
|
||||
|
||||
If it's vital that the daemon should act exactly like a real multicast client
|
||||
on the upstream interface, this function should be enabled.
|
||||
|
||||
Enabling this function increases the risk of bandwidth saturation.
|
||||
|
||||
.. cfgcmd:: set protocols igmp-proxy disable
|
||||
|
||||
Disable this service.
|
||||
|
||||
.. _igmp:proxy_example:
|
||||
|
||||
Example
|
||||
-------
|
||||
|
||||
Interface `eth1` LAN is behind NAT. In order to subscribe `10.0.0.0/23` subnet
|
||||
multicast which is in `eth0` WAN we need to configure igmp-proxy.
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
set protocols igmp-proxy interface eth0 role upstream
|
||||
set protocols igmp-proxy interface eth0 alt-subnet 10.0.0.0/23
|
||||
set protocols igmp-proxy interface eth1 role downstream
|
||||
|
||||
Operation
|
||||
=========
|
||||
|
||||
.. opcmd:: restart igmp-proxy
|
||||
|
||||
Restart the IGMP proxy process.
|
||||
@ -2,7 +2,6 @@
|
||||
Protocols
|
||||
#########
|
||||
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
:includehidden:
|
||||
@ -11,11 +10,12 @@ Protocols
|
||||
bfd
|
||||
bgp
|
||||
failover
|
||||
igmp
|
||||
igmp-proxy
|
||||
isis
|
||||
mpls
|
||||
segment-routing
|
||||
ospf
|
||||
pim
|
||||
pim6
|
||||
rip
|
||||
rpki
|
||||
|
||||
@ -1,2 +0,0 @@
|
||||
PIM
|
||||
###
|
||||
264
docs/configuration/protocols/pim.rst
Normal file
264
docs/configuration/protocols/pim.rst
Normal file
@ -0,0 +1,264 @@
|
||||
:lastproofread: 2023-11-13
|
||||
|
||||
.. _pim:
|
||||
|
||||
####################################
|
||||
PIM – Protocol Independent Multicast
|
||||
####################################
|
||||
|
||||
VyOS supports :abbr:`PIM-SM (PIM Sparse Mode)` as well as
|
||||
:abbr:`IGMP (Internet Group Management Protocol)` v2 and v3
|
||||
|
||||
:abbr:`PIM (Protocol Independent Multicast)` must be configured in every
|
||||
interface of every participating router. Every router must also have the
|
||||
location of the Rendevouz Point manually configured. Then, unidirectional
|
||||
shared trees rooted at the Rendevouz Point will automatically be built
|
||||
for multicast distribution.
|
||||
|
||||
Traffic from multicast sources will go to the Rendezvous Point, and
|
||||
receivers will pull it from a shared tree using :abbr:`IGMP (Internet
|
||||
Group Management Protocol)`.
|
||||
|
||||
Multicast receivers will talk IGMP to their local router, so, besides
|
||||
having PIM configured in every router, IGMP must also be configured in
|
||||
any router where there could be a multicast receiver locally connected.
|
||||
|
||||
VyOS supports both IGMP version 2 and version 3 (which allows
|
||||
source-specific multicast).
|
||||
|
||||
************************
|
||||
PIM-SM - PIM Sparse Mode
|
||||
************************
|
||||
|
||||
.. cfgcmd:: set protocols pim ecmp
|
||||
|
||||
If PIM has the a choice of ECMP nexthops for a particular
|
||||
:abbr:`RPF (Reverse Path Forwarding)`, PIM will cause S,G flows to be
|
||||
spread out amongst the nexthops. If this command is not specified then
|
||||
the first nexthop found will be used.
|
||||
|
||||
.. cfgcmd:: set protocols pim ecmp rebalance
|
||||
|
||||
If PIM is using ECMP and an interface goes down, cause PIM to rebalance all
|
||||
S,G flows across the remaining nexthops. If this command is not configured
|
||||
PIM only modifies those S,G flows that were using the interface that went
|
||||
down.
|
||||
|
||||
.. cfgcmd:: set protocols pim join-prune-interval <n>
|
||||
|
||||
Modify the join/prune interval that PIM uses to the new value. Time is
|
||||
specified in seconds.
|
||||
|
||||
The default time is 60 seconds.
|
||||
|
||||
If you enter a value smaller than 60 seconds be aware that this can and
|
||||
will affect convergence at scale.
|
||||
|
||||
.. cfgcmd:: set protocols pim keep-alive-timer <n>
|
||||
|
||||
Modify the time out value for a S,G flow from 1-65535 seconds. If choosing
|
||||
a value below 31 seconds be aware that some hardware platforms cannot see
|
||||
data flowing in better than 30 second chunks.
|
||||
|
||||
.. cfgcmd:: set protocols pim packets <n>
|
||||
|
||||
When processing packets from a neighbor process the number of packets
|
||||
incoming at one time before moving on to the next task.
|
||||
|
||||
The default value is 3 packets.
|
||||
|
||||
This command is only useful at scale when you can possibly have a large
|
||||
number of PIM control packets flowing.
|
||||
|
||||
.. cfgcmd:: set protocols pim register-accept-list <prefix-list>
|
||||
|
||||
When PIM receives a register packet the source of the packet will be compared
|
||||
to the prefix-list specified, and if a permit is received normal processing
|
||||
continues. If a deny is returned for the source address of the register packet
|
||||
a register stop message is sent to the source.
|
||||
|
||||
.. cfgcmd:: set protocols pim register-suppress-time <n>
|
||||
|
||||
Modify the time that pim will register suppress a FHR will send register
|
||||
notifications to the kernel.
|
||||
|
||||
.. cfgcmd:: set protocols pim rp <address> group <group>
|
||||
|
||||
In order to use PIM, it is necessary to configure a :abbr:`RP (Rendezvous Point)`
|
||||
for join messages to be sent to. Currently the only methodology to do this is
|
||||
via static rendezvous point commands.
|
||||
|
||||
All routers in the PIM network must agree on these values.
|
||||
|
||||
The first ip address is the RP's address and the second value is the matching
|
||||
prefix of group ranges covered.
|
||||
|
||||
.. cfgcmd:: set protocols pim rp keep-alive-timer <n>
|
||||
|
||||
Modify the time out value for a S,G flow from 1-65535 seconds at
|
||||
:abbr:`RP (Rendezvous Point)`. The normal keepalive period for the KAT(S,G)
|
||||
defaults to 210 seconds. However, at the :abbr:`RP (Rendezvous Point)`, the
|
||||
keepalive period must be at least the Register_Suppression_Time, or the RP
|
||||
may time out the (S,G) state before the next Null-Register arrives.
|
||||
Thus, the KAT(S,G) is set to max(Keepalive_Period, RP_Keepalive_Period)
|
||||
when a Register-Stop is sent.
|
||||
|
||||
If choosing a value below 31 seconds be aware that some hardware platforms
|
||||
cannot see data flowing in better than 30 second chunks.
|
||||
|
||||
See :rfc:`7761#section-4.1` for details.
|
||||
|
||||
.. cfgcmd:: set protocols pim no-v6-secondary
|
||||
|
||||
When sending PIM hello packets tell PIM to not send any v6 secondary
|
||||
addresses on the interface. This information is used to allow PIM to use v6
|
||||
nexthops in it's decision for :abbr:`RPF (Reverse Path Forwarding)` lookup
|
||||
if this option is not set (default).
|
||||
|
||||
.. cfgcmd:: set protocols pim spt-switchover infinity-and-beyond [prefix-list <list>]
|
||||
|
||||
On the last hop router if it is desired to not switch over to the SPT tree
|
||||
configure this command.
|
||||
|
||||
Optional parameter prefix-list can be use to control which groups to switch or
|
||||
not switch. If a group is PERMIT as per the prefix-list, then the SPT switchover
|
||||
does not happen for it and if it is DENY, then the SPT switchover happens.
|
||||
|
||||
.. cfgcmd:: set protocols pim ssm prefix-list <list>
|
||||
|
||||
Specify a range of group addresses via a prefix-list that forces PIM to never
|
||||
do :abbr:`SSM (Source-Specific Multicast)` over.
|
||||
|
||||
Interface specific commands
|
||||
===========================
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> bfd [profile <name>]
|
||||
|
||||
Automatically create BFD session for each RIP peer discovered in this
|
||||
interface. When the BFD session monitor signalize that the link is down
|
||||
the RIP peer is removed and all the learned routes associated with that
|
||||
peer are removed.
|
||||
|
||||
If optional profile parameter is used, select a BFD profile for the BFD
|
||||
sessions created via this interface.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> dr-priority <n>
|
||||
|
||||
Set the :abbr:`DR (Designated Router)` Priority for the interface.
|
||||
This command is useful to allow the user to influence what node becomes
|
||||
the DR for a LAN segment.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> hello <n>
|
||||
|
||||
Set the PIM hello and hold interval for a interface.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> no-bsm
|
||||
|
||||
Tell PIM that we would not like to use this interface to process
|
||||
bootstrap messages.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> no-unicast-bsm
|
||||
|
||||
Tell PIM that we would not like to use this interface to process
|
||||
unicast bootstrap messages.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> passive
|
||||
|
||||
Disable sending and receiving PIM control packets on the interface.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> source-address <ip-address>
|
||||
|
||||
If you have multiple addresses configured on a particular interface and would
|
||||
like PIM to use a specific source address associated with that interface.
|
||||
|
||||
******************************************
|
||||
IGMP - Internet Group Management Protocol)
|
||||
******************************************
|
||||
|
||||
.. cfgcmd:: set protocols pim igmp watermark-warning <n>
|
||||
|
||||
Configure watermark warning generation for an IGMP group limit. Generates
|
||||
warning once the configured group limit is reached while adding new groups.
|
||||
|
||||
Interface specific commands
|
||||
===========================
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> igmp
|
||||
join <multicast-address> source-address <IP-address>
|
||||
|
||||
Use this command to allow the selected interface to join a multicast
|
||||
group defining the multicast address you want to join and the source
|
||||
IP address too.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> igmp
|
||||
query-interval <seconds>
|
||||
|
||||
Use this command to configure in the selected interface the IGMP
|
||||
host query interval (1-1800) in seconds that PIM will use.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> igmp
|
||||
query-max-response-time <n>
|
||||
|
||||
Use this command to configure in the selected interface the IGMP
|
||||
query response timeout value (10-250) in deciseconds. If a report is
|
||||
not returned in the specified time, it will be assumed the (S,G) or
|
||||
(*,G) state :rfc:`7761#section-4.1` has timed out.
|
||||
|
||||
.. cfgcmd:: set protocols pim interface <interface> igmp version <version-number>
|
||||
|
||||
Use this command to define in the selected interface whether you
|
||||
choose IGMP version 2 or 3.
|
||||
|
||||
The default value is 3.
|
||||
|
||||
Example
|
||||
-------
|
||||
|
||||
In the following example we can see a basic multicast setup:
|
||||
|
||||
.. image:: /_static/images/multicast-basic.png
|
||||
:width: 90%
|
||||
:align: center
|
||||
:alt: Network Topology Diagram
|
||||
|
||||
|
||||
|
||||
**Router 1**
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
set interfaces ethernet eth2 address '172.16.0.2/24'
|
||||
set interfaces ethernet eth1 address '100.64.0.1/24'
|
||||
set protocols ospf area 0 network '172.16.0.0/24'
|
||||
set protocols ospf area 0 network '100.64.0.0/24'
|
||||
set protocols igmp interface eth1
|
||||
set protocols pim interface eth1
|
||||
set protocols pim interface eth2
|
||||
set protocols pim rp address 172.16.255.1 group '224.0.0.0/4'
|
||||
|
||||
**Router 3**
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
set interfaces dummy dum0 address '172.16.255.1/24'
|
||||
set interfaces ethernet eth0 address '172.16.0.1/24'
|
||||
set interfaces ethernet eth1 address '172.16.1.1/24'
|
||||
set protocols ospf area 0 network '172.16.0.0/24'
|
||||
set protocols ospf area 0 network '172.16.255.0/24'
|
||||
set protocols ospf area 0 network '172.16.1.0/24'
|
||||
set protocols pim interface dum0
|
||||
set protocols pim interface eth0
|
||||
set protocols pim interface eth1
|
||||
set protocols pim rp address 172.16.255.1 group '224.0.0.0/4'
|
||||
|
||||
**Router 2**
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
set interfaces ethernet eth1 address '10.0.0.1/24'
|
||||
set interfaces ethernet eth2 address '172.16.1.2/24'
|
||||
set protocols ospf area 0 network '10.0.0.0/24'
|
||||
set protocols ospf area 0 network '172.16.1.0/24'
|
||||
set protocols pim interface eth1
|
||||
set protocols pim interface eth2
|
||||
set protocols pim rp address 172.16.255.1 group '224.0.0.0/4'
|
||||
@ -1,8 +1,8 @@
|
||||
.. _pim6:
|
||||
|
||||
##############
|
||||
IPv6 Multicast
|
||||
##############
|
||||
##############################################
|
||||
PIM6 - Protocol Independent Multicast for IPv6
|
||||
##############################################
|
||||
|
||||
VyOS facilitates IPv6 Multicast by supporting **PIMv6** and **MLD**.
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user