vyos/vyos-documentation
1
0
Fork 0
mirror of https://github.com/vyos/vyos-documentation.git synced 2025-12-15 18:12:02 +01:00
Code Issues Packages Projects Releases Wiki Activity

Modified old option from 'enable-default-log' to new one 'default-log'

Browse Source
This commit is contained in:
srividya0208 2024-05-06 13:49:48 -04:00
parent 377ab20c2e
commit 0e98fdb641
5 changed files with 20 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
docs/configexamples/zone-policy.rst
View File

@ -145,7 +145,7 @@ To add logging to the default rule, do:
.. code-block:: none
set firewall name <ruleSet> enable-default-log
set firewall name <ruleSet> default-log
By default, iptables does not allow traffic for established sessions to
@ -251,7 +251,7 @@ Since we have 4 zones, we need to setup the following rulesets.
Dmz-local
Even if the two zones will never communicate, it is a good idea to
create the zone-pair-direction rulesets and set enable-default-log. This
create the zone-pair-direction rulesets and set default-log. This
will allow you to log attempts to access the networks. Without it, you
will never see the connection attempts.
@ -261,7 +261,7 @@ This is an example of the three base rules.
name wan-lan {
default-action drop
enable-default-log
default-log
rule 1 {
action accept
state {
@ -285,7 +285,7 @@ Here is an example of an IPv6 DMZ-WAN ruleset.
ipv6-name dmz-wan-6 {
default-action drop
enable-default-log
default-log
rule 1 {
action accept
state {

8
docs/configuration/firewall/bridge.rst
View File

@ -157,8 +157,8 @@ log options can be defined.
Enable logging for the matched packet. If this configuration command is not
present, then log is not enabled.
.. cfgcmd:: set firewall bridge forward filter enable-default-log
.. cfgcmd:: set firewall bridge name <name> enable-default-log
.. cfgcmd:: set firewall bridge forward filter default-log
.. cfgcmd:: set firewall bridge name <name> default-log
Use this command to enable the logging of the default action on
the specified chain.
@ -325,7 +325,7 @@ Configuration example:
.. code-block:: none
set firewall bridge forward filter default-action 'drop'
set firewall bridge forward filter enable-default-log
set firewall bridge forward filter default-log
set firewall bridge forward filter rule 10 action 'continue'
set firewall bridge forward filter rule 10 inbound-interface name 'eth2'
set firewall bridge forward filter rule 10 vlan id '22'
@ -341,7 +341,7 @@ Configuration example:
set firewall bridge forward filter rule 40 destination mac-address '66:55:44:33:22:11'
set firewall bridge forward filter rule 40 source mac-address '11:22:33:44:55:66'
set firewall bridge name TEST default-action 'accept'
set firewall bridge name TEST enable-default-log
set firewall bridge name TEST default-log
set firewall bridge name TEST rule 10 action 'continue'
set firewall bridge name TEST rule 10 log
set firewall bridge name TEST rule 10 vlan priority '0'

8
docs/configuration/firewall/ipv4.rst
View File

@ -206,10 +206,10 @@ log options can be defined.
Enable logging for the matched packet. If this configuration command is not
present, then log is not enabled.
.. cfgcmd:: set firewall ipv4 forward filter enable-default-log
.. cfgcmd:: set firewall ipv4 input filter enable-default-log
.. cfgcmd:: set firewall ipv4 output filter enable-default-log
.. cfgcmd:: set firewall ipv4 name <name> enable-default-log
.. cfgcmd:: set firewall ipv4 forward filter default-log
.. cfgcmd:: set firewall ipv4 input filter default-log
.. cfgcmd:: set firewall ipv4 output filter default-log
.. cfgcmd:: set firewall ipv4 name <name> default-log
Use this command to enable the logging of the default action on
the specified chain.

10
docs/configuration/firewall/ipv6.rst
View File

@ -206,10 +206,10 @@ log options can be defined.
Enable logging for the matched packet. If this configuration command is not
present, then log is not enabled.
.. cfgcmd:: set firewall ipv6 forward filter enable-default-log
.. cfgcmd:: set firewall ipv6 input filter enable-default-log
.. cfgcmd:: set firewall ipv6 output filter enable-default-log
.. cfgcmd:: set firewall ipv6 name <name> enable-default-log
.. cfgcmd:: set firewall ipv6 forward filter default-log
.. cfgcmd:: set firewall ipv6 input filter default-log
.. cfgcmd:: set firewall ipv6 output filter default-log
.. cfgcmd:: set firewall ipv6 name <name> default-log
Use this command to enable the logging of the default action on
the specified chain.
@ -1177,7 +1177,7 @@ Example Partial Config
}
name INP-ETH1 {
default-action drop
enable-default-log
default-log
rule 10 {
action accept
protocol tcp_udp

6
docs/configuration/policy/route.rst
View File

@ -19,8 +19,8 @@ from 1 - 999999, at the first match the action of the rule will be executed.
Provide a rule-set description.
.. cfgcmd:: set policy route <name> enable-default-log
.. cfgcmd:: set policy route6 <name> enable-default-log
.. cfgcmd:: set policy route <name> default-log
.. cfgcmd:: set policy route6 <name> default-log
Option to log packets hitting default-action.
@ -271,4 +271,4 @@ setting a different routing table.
.. cfgcmd:: set policy route <name> rule <n> set tcp-mss <500-1460>
.. cfgcmd:: set policy route6 <name> rule <n> set tcp-mss <500-1460>
Set packet modifications: Explicitly set TCP Maximum segment size value.
Set packet modifications: Explicitly set TCP Maximum segment size value.