cloudstack/client/WEB-INF/classes/resources/messages.properties

# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied.  See the License for the
# specific language governing permissions and limitations
# under the License.


#new labels (begin) **********************************************************************************************
label.isolation.uri=Isolation URI
label.broadcast.uri=Broadcast URI
#new labels (end) ************************************************************************************************


#modified labels (begin) *****************************************************************************************
message.zoneWizard.enable.local.storage=WARNING: If you enable local storage for this zone, you must do the following, depending on where you would like your system VMs to launch:<br/><br/>1. If system VMs need to be launched in primary storage, primary storage needs to be added to the zone after creation. You must also start the zone in a disabled state.<br/><br/>2. If system VMs need to be launched in local storage, system.vm.use.local.storage needs to be set to true before you enable the zone.<br/><br/><br/>Would you like to continue?
#modified labels (end) *******************************************************************************************

label.configure.network.ACLs=Configure Network ACLs
label.network.ACLs=Network ACLs
label.add.network.ACL=Add network ACL
label.private.Gateway=Private Gateway
label.VPC.router.details=VPC router details
label.VMs.in.tier=VMs in tier
label.local.storage.enabled=Local storage enabled
label.tier.details=Tier details
label.edit.tags=Edit tags
label.action.enable.physical.network=Enable physical network
label.action.disable.physical.network=Disable physical network
message.action.enable.physical.network=Please confirm that you want to enable this physical network.
message.action.disable.physical.network=Please confirm that you want to disable this physical network.

label.select.tier=Select Tier
label.add.ACL=Add ACL
label.remove.ACL=Remove ACL
label.tier=Tier
label.network.ACL=Network ACL
label.network.ACL.total=Network ACL Total
label.add.new.gateway=Add new gateway
message.add.new.gateway.to.vpc=Please specify the information to add a new gateway to this VPC.
label.delete.gateway=delete gateway
message.delete.gateway=Please confirm you want to delete the gateway
label.CIDR.of.destination.network=CIDR of destination network
label.add.route=Add route
label.add.static.route=Add static route
label.remove.static.route=Remove static route
label.site.to.site.VPN=site-to-site VPN
label.add.VPN.gateway=Add VPN Gateway
message.add.VPN.gateway=Please confirm that you want to add a VPN Gateway
label.VPN.gateway=VPN Gateway
label.delete.VPN.gateway=delete VPN Gateway
message.delete.VPN.gateway=Please confirm that you want to delete this VPN Gateway
label.VPN.connection=VPN Connection
label.IPsec.preshared.key=IPsec Preshared-Key
label.IKE.policy=IKE policy
label.ESP.policy=ESP policy
label.create.VPN.connection=Create VPN Connection
label.VPN.customer.gateway=VPN Customer Gateway
label.CIDR.list=CIDR list
label.IKE.lifetime=IKE Lifetime (second)
label.ESP.lifetime=ESP Lifetime(second)
label.dead.peer.detection=Dead Peer Detection
label.reset.VPN.connection=Reset VPN connection
message.reset.VPN.connection=Please confirm that you want to reset VPN connection
label.delete.VPN.connection=delete VPN connection
message.delete.VPN.connection=Please confirm that you want to delete VPN connection
label.add.new.tier=Add new tier
label.add.VM.to.tier=Add VM to tier
label.remove.tier=Remove tier

label.local.storage.enabled=Local Storage Enabled
label.associated.network=Associated Network
label.add.port.forwarding.rule=Add port forwarding rule
label.dns=DNS

label.vpc=VPC
label.vpc.id=VPC ID
label.tier=Tier
label.add.vpc=Add VPC
label.super.cidr.for.guest.networks=Super CIDR for Guest Networks
label.DNS.domain.for.guest.networks=DNS domain for Guest Networks
label.configure.vpc=Configure VPC
label.edit.vpc=Edit VPC
label.restart.vpc=restart VPC
message.restart.vpc=Please confirm that you want to restart the VPC
label.remove.vpc=remove VPC
message.remove.vpc=Please confirm that you want to remove the VPC
label.vpn.customer.gateway=VPN Customer Gateway
label.add.vpn.customer.gateway=Add VPN Customer Gateway
label.IKE.encryption=IKE Encryption
label.IKE.hash=IKE Hash
label.IKE.DH=IKE DH
label.ESP.encryption=ESP Encryption
label.ESP.hash=ESP Hash
label.perfect.forward.secrecy=Perfect Forward Secrecy
label.IKE.lifetime=IKE lifetime (second)
label.ESP.lifetime=ESP Lifetime (second)
label.dead.peer.detection=Dead Peer Detection
label.delete.VPN.customer.gateway=delete VPN Customer Gateway
message.delete.VPN.customer.gateway=Please confirm that you want to delete this VPN Customer Gateway

label.network.domain.text=Network domain
label.memory.mb=Memory (in MB)
label.cpu.mhz=CPU (in MHz)

message.action.remove.host=Please confirm that you want to remove this host.

message.action.reboot.router=All services provided by this virtual router will be interrupted. Please confirm that you want to reboot this router.
message.action.stop.router=All services provided by this virtual router will be interrupted. Please confirm that you want to stop this router.
message.restart.network=All services provided by this network will be interrupted. Please confirm that you want to restart this network.


label.ipaddress=IP Address
label.vcdcname=vCenter DC name
label.vcipaddress=vCenter IP Address
label.vsmctrlvlanid=Control VLAN ID
label.vsmpktvlanid=Packet VLAN ID
label.vsmstoragevlanid=Storage VLAN ID
label.nexusVswitch=Nexus 1000v
label.action.delete.nexusVswitch=Delete Nexus 1000v
label.action.enable.nexusVswitch=Enable Nexus 1000v
label.action.disable.nexusVswitch=Disable Nexus 1000v
label.action.list.nexusVswitch=List Nexus 1000v
message.action.delete.nexusVswitch=Please confirm that you want to delete this nexus 1000v
message.action.enable.nexusVswitch=Please confirm that you want to enable this nexus 1000v
message.action.disable.nexusVswitch=Please confirm that you want to disable this nexus 1000v
message.specify.url=Please specify URL
label.select.instance.to.attach.volume.to=Select instance to attach volume to
label.upload=Upload
label.upload.volume=Upload volume
label.virtual.routers=Virtual Routers
label.primary.storage.count=Primary Storage Pools
label.secondary.storage.count=Secondary Storage Pools
label.number.of.system.vms=Number of System VMs
label.number.of.virtual.routers=Number of Virtual Routers
label.action.register.iso=Register ISO
label.isolation.method=Isolation method
label.action.register.template=Register template
label.checksum=MD5 checksum
label.vpn=VPN
label.vlan=VLAN


label.management.ips=Management IP Addresses
label.devices=Devices
label.rules=Rules
label.traffic.label=Traffic label
label.vm.state=VM state
message.setup.physical.network.during.zone.creation.basic=When adding a basic zone, you can set up one physical network, which corresponds to a NIC on the hypervisor. The network carries several types of traffic.<br/><br/>You may also <strong>drag and drop</strong> other traffic types onto the physical network.
label.domain.router=Domain router
label.console.proxy=Console proxy
label.secondary.storage.vm=Secondary storage VM
label.add.netScaler.device=Add Netscaler device
label.add.F5.device=Add F5 device
label.add.SRX.device=Add SRX device
label.account.and.security.group=Account, Security group
label.fetch.latest=Fetch latest
label.system.offering=System Offering
message.validate.instance.name=Instance name can not be longer than 63 characters. Only ASCII letters a~z, A~Z, digits 0~9, hyphen are allowed. Must start with a letter and end with a letter or a digit.


label.isolated.networks=Isolated networks
label.latest.events=Latest events
state.Enabled=Enabled
label.system.wide.capacity=System-wide capacity
label.network.service.providers=Network Service Providers
message.launch.zone=Zone is ready to launch; please proceed to the next step.
error.unable.to.reach.management.server=Unable to reach Management Server
label.internal.name=Internal name
message.configure.all.traffic.types=You have multiple physical networks; please configure labels for each traffic type by clicking on the Edit button.
message.edit.traffic.type=Please specify the traffic label you want associated with this traffic type.
label.edit.traffic.type=Edit traffic type
label.label=Label
label.max.networks=Max. networks
error.invalid.username.password=Invalid username or password
message.enabling.security.group.provider=Enabling Security Group provider
message.adding.Netscaler.provider=Adding Netscaler provider
message.creating.guest.network=Creating guest network
label.action.delete.physical.network=Delete physical network
message.action.delete.physical.network=Please confirm that you want to delete this physical network
message.installWizard.copy.whatIsAHost=A host is a single computer. Hosts provide the computing resources that run the guest virtual machines. Each host has hypervisor software installed on it to manage the guest VMs (except for bare metal hosts, which are a special case discussed in the Advanced Installation Guide). For example, a Linux KVM-enabled server, a Citrix XenServer server, and an ESXi server are hosts. In a Basic Installation, we use a single host running XenServer or KVM.<br/><br/>The host is the smallest organizational unit within a CloudStack&#8482; deployment. Hosts are contained within clusters, clusters are contained within pods, and pods are contained within zones. 


label.add.compute.offering=Add compute offering
label.compute.offering=Compute offering
label.compute.offerings=Compute offerings
label.select.offering=Select offering
label.menu.infrastructure=Infrastructure
label.sticky.tablesize=Table size
label.sticky.expire=Expires
label.sticky.cookie-name=Cookie name
label.sticky.mode=Mode
label.sticky.length=Length
label.sticky.holdtime=Hold time
label.sticky.request-learn=Request learn
label.sticky.prefix=Prefix
label.sticky.nocache=No cache
label.sticky.indirect=Indirect
label.sticky.postonly=Post only
label.sticky.domain=Domain
state.Allocating=Allocating
state.Migrating=Migrating
error.please.specify.physical.network.tags=Network offerings is not available until you specify tags for this physical network.


state.Stopping=Stopping
message.add.load.balancer.under.ip=The load balancer rule has been added under IP:
message.select.instance=Please select an instance.
label.select=Select
label.select.vm.for.static.nat=Select VM for static NAT
label.select.instance=Select instance
label.nat.port.range=NAT Port Range
label.static.nat.vm.details=Static NAT VM Details
label.edit.lb.rule=Edit LB rule
message.migrate.instance.to.host=Please confirm that you want to migrate instance to another host.
label.migrate.instance.to.host=Migrate instance to another host
message.migrate.instance.to.ps=Please confirm that you want to migrate instance to another primary storage.
label.migrate.instance.to.ps=Migrate instance to another primary storage
label.corrections.saved=Corrections saved
message.installWizard.copy.whatIsSecondaryStorage=Secondary storage is associated with a zone, and it stores the following:<ul><li>Templates - OS images that can be used to boot VMs and can include additional configuration information, such as installed applications</li><li>ISO images - OS images that can be bootable or non-bootable</li><li>Disk volume snapshots - saved copies of VM data which can be used for data recovery or to create new templates</ul>
message.installWizard.copy.whatIsPrimaryStorage=A CloudStack&#8482; cloud infrastructure makes use of two types of storage: primary storage and secondary storage. Both of these can be iSCSI or NFS servers, or localdisk.<br/><br/><strong>Primary storage</strong> is associated with a cluster, and it stores the disk volumes of each guest VM for all the VMs running on hosts in that cluster. The primary storage server is typically located close to the hosts. 
message.installWizard.copy.whatIsACluster=A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Virtual machine instances (VMs) can be live-migrated from one host to another within the same cluster, without interrupting service to the user. A cluster is the third-largest organizational unit within a CloudStack&#8482; deployment. Clusters are contained within pods, and pods are contained within zones.<br/><br/>CloudStack&#8482; allows multiple clusters in a cloud deployment, but for a Basic Installation, we only need one cluster. 
message.installWizard.copy.whatIsAPod=A pod often represents a single rack. Hosts in the same pod are in the same subnet.<br/><br/>A pod is the second-largest organizational unit within a CloudStack&#8482; deployment. Pods are contained within zones. Each zone can contain one or more pods; in the Basic Installation, you will have just one pod in your zone.
message.installWizard.copy.whatIsAZone=A zone is the largest organizational unit within a CloudStack&#8482; deployment. A zone typically corresponds to a single datacenter, although it is permissible to have multiple zones in a datacenter. The benefit of organizing infrastructure into zones is to provide physical isolation and redundancy. For example, each zone can have its own power supply and network uplink, and the zones can be widely separated geographically (though this is not required).
message.installWizard.copy.whatIsCloudStack=CloudStack&#8482 is a software platform that pools computing resources to build public, private, and hybrid Infrastructure as a Service (IaaS) clouds. CloudStack&#8482 manages the network, storage, and compute nodes that make up a cloud infrastructure. Use CloudStack&#8482 to deploy, manage, and configure cloud computing environments.<br/><br/>Extending beyond individual virtual machine images running on commodity hardware, CloudStack&#8482 provides a turnkey cloud infrastructure software stack for delivering virtual datacenters as a service - delivering all of the essential components to build, deploy, and manage multi-tier and multi-tenant cloud applications. Both open-source and Premium versions are available, with the open-source version offering nearly identical features. 
message.installWizard.tooltip.addSecondaryStorage.path=The exported path, located on the server you specified above
message.installWizard.tooltip.addSecondaryStorage.nfsServer=The IP address of the NFS server hosting the secondary storage
message.installWizard.tooltip.addPrimaryStorage.path=(for NFS) In NFS this is the exported path from the server. Path (for SharedMountPoint).  With KVM this is the path on each host that is where this primary storage is mounted.  For example, "/mnt/primary".
message.installWizard.tooltip.addPrimaryStorage.server=(for NFS, iSCSI, or PreSetup) The IP address or DNS name of the storage device.
message.installWizard.tooltip.addPrimaryStorage.name=The name for the storage device.
message.installWizard.tooltip.addHost.password=This is the password for the user named above (from your XenServer install).
message.installWizard.tooltip.addHost.username=Usually root.
message.installWizard.tooltip.addHost.hostname=The DNS name or IP address of the host.
message.installWizard.tooltip.addCluster.name=A name for the cluster.  This can be text of your choosing and is not used by CloudStack.
message.installWizard.tooltip.addPod.reservedSystemEndIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers.
message.installWizard.tooltip.addPod.reservedSystemStartIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers.
message.installWizard.tooltip.addPod.reservedSystemNetmask=The netmask in use on the subnet the guests will use.
message.installWizard.tooltip.addPod.reservedSystemGateway=The gateway for the hosts in that pod.
message.installWizard.tooltip.addPod.name=A name for the pod
message.installWizard.tooltip.configureGuestTraffic.guestEndIp=The range of IP addresses that will be available for allocation to guests in this zone.  If one NIC is used, these IPs should be in the same CIDR as the pod CIDR.
message.installWizard.tooltip.configureGuestTraffic.guestStartIp=The range of IP addresses that will be available for allocation to guests in this zone.  If one NIC is used, these IPs should be in the same CIDR as the pod CIDR.
message.installWizard.tooltip.configureGuestTraffic.guestNetmask=The netmask in use on the subnet that the guests should use
message.installWizard.tooltip.configureGuestTraffic.guestGateway=The gateway that the guests should use
message.installWizard.tooltip.configureGuestTraffic.description=A description for your network
message.installWizard.tooltip.configureGuestTraffic.name=A name for your network
message.installWizard.tooltip.addZone.internaldns2=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here.
message.installWizard.tooltip.addZone.internaldns1=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here.
message.installWizard.tooltip.addZone.dns2=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here.
message.installWizard.tooltip.addZone.name=A name for the zone
message.installWizard.tooltip.addZone.dns1=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here.
message.setup.successful=Cloud setup successful!
label.may.continue=You may now continue.
error.installWizard.message=Something went wrong; you may go back and correct any errors
message.installWizard.now.building=Now building your cloud... 
message.installWizard.click.retry=Click the button to retry launch.
label.launch=Launch
label.installWizard.click.launch=Click the launch button.
label.congratulations=Congratulations!
label.installWizard.addSecondaryStorageIntro.subtitle=What is secondary storage?
label.installWizard.addSecondaryStorageIntro.title=Let&rsquo;s add secondary storage
label.installWizard.addPrimaryStorageIntro.subtitle=What is primary storage?
label.installWizard.addPrimaryStorageIntro.title=Let&rsquo;s add primary storage
label.installWizard.addHostIntro.subtitle=What is a host?
label.installWizard.addHostIntro.title=Let&rsquo;s add a host
label.installWizard.addClusterIntro.subtitle=What is a cluster?
label.installWizard.addClusterIntro.title=Let&rsquo;s add a cluster
label.installWizard.addPodIntro.subtitle=What is a pod?
label.installWizard.addPodIntro.title=Let&rsquo;s add a pod
label.installWizard.addZone.title=Add zone
label.installWizard.addZoneIntro.subtitle=What is a zone?
label.installWizard.addZoneIntro.title=Let&rsquo;s add a zone
error.password.not.match=The password fields do not match
label.confirm.password=Confirm password
message.change.password=Please change your password.
label.save.and.continue=Save and continue
label.skip.guide=I have used CloudStack before, skip this guide
label.continue.basic.install=Continue with basic installation
label.introduction.to.cloudstack=Introduction to CloudStack&#8482
label.what.is.cloudstack=What is CloudStack&#8482?
label.hints=Hints
label.installWizard.subtitle=This tour will aid you in setting up your CloudStack&#8482 installation
label.continue=Continue
label.installWizard.title=Hello and Welcome to CloudStack&#8482
label.agree=Agree
label.license.agreement=License Agreement
label.license.agreement.subtitle=Please accept the CloudStack&#8482 EULA before installing.
label.manage.resources=Manage Resources
label.port.forwarding.policies=Port forwarding policies
label.load.balancing.policies=Load balancing policies
label.networking.and.security=Networking and security
label.bandwidth=Bandwidth
label.virtual.machines=Virtual machines
label.compute.and.storage=Compute and Storage
label.task.completed=Task completed
label.update.project.resources=Update project resources
label.remove.project.account=Remove project account
label.item.listing=Item listing
message.select.item=Please select an item.
label.removing=Removing
label.invite=Invite
label.add.by=Add by
label.max.vms=Max. user VMs
label.max.public.ips=Max. public IPs
label.max.volumes=Max. volumes
label.max.snapshots=Max. snapshots
label.max.templates=Max. templates
label.max.vpcs=Max. VPCs
label.project.dashboard=Project dashboard
label.remind.later=Remind me later
label.invited.accounts=Invited accounts
label.invite.to=Invite to
label.add.accounts.to=Add accounts to
label.add.accounts=Add accounts
label.project.name=Project name
label.create.project=Create project
label.networks=Networks
label.launch.vm=Launch VM
label.new.vm=New VM
label.previous=Previous
label.add.to.group=Add to group
message.vm.review.launch=Please review the following information and confirm that your virtual instance is correct before launch.
message.select.security.groups=Please select security group(s) for your new VM
label.new=New
message.please.select.networks=Please select networks for your virtual machine.
message.please.proceed=Please proceed to the next step.
message.zone.no.network.selection=The zone you selected does not have any choices for network selection.
label.no.thanks=No thanks
label.my.templates=My templates
message.select.template=Please select a template for your new virtual instance.
message.select.iso=Please select an ISO for your new virtual instance.
message.template.desc=OS image that can be used to boot VMs
message.iso.desc=Disc image containing data or bootable media for OS
label.select.iso.or.template=Select ISO or template
message.select.a.zone=A zone typically corresponds to a single datacenter. Multiple zones help make the cloud more reliable by providing physical isolation and redundancy.
label.select.a.zone=Select a zone
label.review=Review
label.select.a.template=Select a template
label.setup=Setup
state.Allocated=Allocated
changed.item.properties=Changed item properties
label.apply=Apply
label.default=Default
label.viewing=Viewing
label.move.to.top=Move to top
label.move.up.row=Move up one row
label.move.down.row=Move down one row
label.move.to.bottom=Move to bottom
label.drag.new.position=Drag to new position
label.order=Order
label.no.data=No data to show
label.change.value=Change value
label.clear.list=Clear list
label.full.path=Full path
message.add.domain=Please specify the subdomain you want to create under this domain
message.delete.user=Please confirm that you would like to delete this user.
message.enable.user=Please confirm that you would like to enable this user.
message.disable.user=Please confirm that you would like to disable this user.
message.generate.keys=Please confirm that you would like to generate new keys for this user.
message.update.resource.count=Please confirm that you want to update resource counts for this account.
message.edit.account=Edit ("-1" indicates no limit to the amount of resources create)
label.total.of.vm=Total of VM
label.total.of.ip=Total of IP Address
state.enabled=Enabled
message.action.download.iso=Please confirm that you want to download this ISO.
message.action.download.template=Please confirm that you want to download this template.
label.destination.zone=Destination Zone
label.keyboard.type=Keyboard type
label.nic.adapter.type=NIC adapter type
label.root.disk.controller=Root disk controller
label.community=Community
label.remove.egress.rule=Remove egress rule
label.add.egress.rule=Add egress rule
label.egress.rule=Egress rule
label.remove.ingress.rule=Remove ingress rule
label.delete.vpn.user=Delete VPN user
label.add.vpn.user=Add VPN user
label.remove.pf=Remove port forwarding rule
label.remove.vm.from.lb=Remove VM from load balancer rule
label.add.vms.to.lb=Add VM(s) to load balancer rule
label.add.vm=Add VM
label.remove.static.nat.rule=Remove static NAT rule
label.remove.rule=Remove rule
label.add.static.nat.rule=Add static NAT rule
label.add.rule=Add rule
label.configuration=Configuration
message.disable.vpn=Are you sure you want to disable VPN?
label.disable.vpn=Disable VPN
message.enable.vpn=Please confirm that you want VPN access enabled for this IP address.
label.enable.vpn=Enable VPN
message.acquire.new.ip=Please confirm that you would like to acquire a new IP for this network.
label.elastic=Elastic
label.my.network=My network
label.add.vms=Add VMs
label.configure=Configure
label.stickiness=Stickiness
label.source=Source
label.least.connections=Least connections
label.round.robin=Round-robin
label.restart.required=Restart required
label.clean.up=Clean up
label.restart.network=Restart network
label.edit.network.details=Edit network details
label.add.guest.network=Add guest network
label.guest.networks=Guest networks
message.ip.address.changed=Your IP addresses may have changed; would you like to refresh the listing? Note that in this case the details pane will close.
state.BackingUp=Backing Up
state.BackedUp=Backed Up
label.done=Done
label.vm.name=VM name
message.migrate.volume=Please confirm that you want to migrate volume to another primary storage.
label.migrate.volume=Migrate volume to another primary storage
message.create.template=Are you sure you want to create template?
label.create.template=Create template
message.download.volume.confirm=Please confirm that you want to download this volume
message.detach.disk=Are you sure you want to detach this disk?
state.ready=Ready
state.Ready=Ready
label.vm.display.name=VM display name
label.select-view=Select view
label.local.storage=Local Storage
label.direct.ips=Shared Network IPs
label.view.all=View all
label.zone.details=Zone details
message.alert.state.detected=Alert state detected
state.Starting=Starting
state.Expunging=Expunging
state.Creating=Creating
message.decline.invitation=Are you sure you want to decline this project invitation?
label.decline.invitation=Decline invitation
message.confirm.join.project=Please confirm you wish to join this project.
message.join.project=You have now joined a project. Please switch to Project view to see the project.
label.accept.project.invitation=Accept project invitation
label.token=Token
label.project.id=Project ID
message.enter.token=Please enter the token that you were given in your invite e-mail.
label.enter.token=Enter token
state.Accepted=Accepted
state.Pending=Pending
state.Completed=Completed
state.Declined=Declined
label.project=Project
label.invitations=Invitations
label.delete.project=Delete project
message.delete.project=Are you sure you want to delete this project?
message.activate.project=Are you sure you want to activate this project?
label.activate.project=Activate Project
label.suspend.project=Suspend Project
message.suspend.project=Are you sure you want to suspend this project?
state.Suspended=Suspended
label.edit.project.details=Edit project details
label.new.project=New Project
state.Active=Active
state.Disabled=Disabled
label.projects=Projects
label.make.project.owner=Make account project owner
label.remove.project.account=Remove account from project
message.project.invite.sent=Invite sent to user; they will be added to the project once they accept the invitation
label.add.account.to.project=Add account to project
label.revoke.project.invite=Revoke invitation
label.project.invite=Invite to project
label.select.project=Select Project
message.no.projects=You do not have any projects.<br/>Please create a new one from the projects section.
message.no.projects.adminOnly=You do not have any projects.<br/>Please ask your administrator to create a new project.
message.pending.projects.1=You have pending project invitations:
message.pending.projects.2=To view, please go to the projects section, then select invitations from the drop-down.
message.instanceWizard.noTemplates=You do not have any templates available; please add a compatible template, and re-launch the instance wizard.
label.view=View
instances.actions.reboot.label=Reboot instance
label.filterBy=Filter by
label.ok=OK
notification.reboot.instance=Reboot instance
notification.start.instance=Start instance
notification.stop.instance=Stop instance
label.display.name=Display name
label.zone.name=Zone name
ui.listView.filters.all=All
ui.listView.filters.mine=Mine
state.Running=Running
state.Stopped=Stopped
state.Destroyed=Destroyed
state.Error=Error
message.reset.password.warning.notPasswordEnabled=The template of this instance was created without password enabled
message.reset.password.warning.notStopped=Your instance must be stopped before attempting to change its current password
label.notifications=Notifications
label.default.view=Default View
label.project.view=Project View

message.add.system.service.offering=Please fill in the following data to add a new system service offering.
message.action.delete.system.service.offering=Please confirm that you want to delete this system service offering.
label.action.delete.system.service.offering=Delete System Service Offering
label.hypervisor.capabilities=Hypervisor capabilities
label.hypervisor.version=Hypervisor version
label.max.guest.limit=Max guest limit
label.add.network.offering=Add network offering
label.supported.services=Supported Services
label.service.capabilities=Service Capabilities
label.guest.type=Guest Type
label.specify.IP.ranges=Specify IP ranges
label.conserve.mode=Conserve mode
label.created.by.system=Created by system
label.menu.system.service.offerings=System Offerings
label.add.system.service.offering=Add System Service Offering
label.redundant.router.capability=Redundant router capability
label.supported.source.NAT.type=Supported Source NAT type
label.elastic.LB=Elastic LB
label.LB.isolation=LB isolation
label.elastic.IP=Elastic IP
label.network.label.display.for.blank.value=Use default gateway
label.xen.traffic.label=XenServer traffic label
label.kvm.traffic.label=KVM traffic label
label.vmware.traffic.label=VMware traffic label
label.start.IP=Start IP
label.end.IP=End IP
label.remove.ip.range=Remove IP range
label.ip.ranges=IP Ranges
label.start.vlan=Start Vlan
label.end.vlan=End Vlan
label.broadcast.domain.range=Broadcast domain range
label.compute=Compute
message.add.guest.network=Please confirm that you would like to add a guest network
label.subdomain.access=Subdomain Access
label.guest.start.ip=Guest start IP
label.guest.end.ip=Guest end IP
label.virtual.router=Virtual Router
label.physical.network.ID=Physical network ID
label.destination.physical.network.id=Destination physical network ID
label.dhcp=DHCP
label.destroy.router=Destroy router
message.confirm.destroy.router=Please confirm that you would like to destroy this router
label.change.service.offering=Change service offering
label.view.console=View console
label.redundant.state=Redundant state
label.enable.provider=Enable provider
message.confirm.enable.provider=Please confirm that you would like to enable this provider
label.disable.provider=Disable provider
message.confirm.disable.provider=Please confirm that you would like to disable this provider
label.shutdown.provider=Shutdown provider
message.confirm.shutdown.provider=Please confirm that you would like to shutdown this provider
label.netScaler=NetScaler
label.add.new.NetScaler=Add new NetScaler
label.capacity=Capacity
label.dedicated=Dedicated
label.f5=F5
label.add.new.F5=Add new F5
label.srx=SRX
label.providers=Providers
label.add.new.SRX=Add new SRX
label.timeout=Timeout
label.public.network=Public network
label.private.network=Private network
label.enable.swift=Enable Swift
confirm.enable.swift=Please fill in the following information to enable support for Swift
message.after.enable.swift=Swift configured. Note: When you leave this page, you will not be able to re-configure Swift again.
label.key=Key
label.delete.NetScaler=Delete NetScaler
message.confirm.delete.NetScaler=Please confirm that you would like to delete NetScaler
label.delete.F5=Delete F5
message.confirm.delete.F5=Please confirm that you would like to delete F5
label.delete.SRX=Delete SRX
message.confirm.delete.SRX=Please confirm that you would like to delete SRX
label.pods=Pods
label.pod.name=Pod name
label.reserved.system.gateway=Reserved system gateway
label.reserved.system.netmask=Reserved system netmask
label.start.reserved.system.IP=Start Reserved system IP
label.end.reserved.system.IP=End Reserved system IP
label.clusters=Clusters
label.cluster.name=Cluster Name
label.host.MAC=Host MAC
label.agent.username=Agent Username
label.agent.password=Agent Password
message.confirm.action.force.reconnect=Please confirm that you want to force reconnect this host.
label.resource.state=Resource state
label.LUN.number=LUN #
message.confirm.remove.IP.range=Please confirm that you would like to remove this IP range.
message.tooltip.zone.name=A name for the zone.
message.tooltip.dns.1=Name of a DNS server for use by VMs in the zone. The public IP addresses for the zone must have a route to this server.
message.tooltip.dns.2=A second DNS server name for use by VMs in the zone. The public IP addresses for the zone must have a route to this server.
message.tooltip.internal.dns.1=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server.
message.tooltip.internal.dns.2=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server.
message.tooltip.network.domain=A DNS suffix that will create a custom domain name for the network that is accessed by guest VMs.
message.tooltip.pod.name=A name for this pod.
message.tooltip.reserved.system.gateway=The gateway for the hosts in the pod.
message.tooltip.reserved.system.netmask=The network prefix that defines the pod subnet. Uses CIDR notation.
message.creating.zone=Creating zone
message.creating.physical.networks=Creating physical networks
message.configuring.physical.networks=Configuring physical networks
message.adding.Netscaler.device=Adding Netscaler device
message.creating.pod=Creating pod
message.configuring.public.traffic=Configuring public traffic
message.configuring.storage.traffic=Configuring storage traffic
message.configuring.guest.traffic=Configuring guest traffic
message.creating.cluster=Creating cluster
message.adding.host=Adding host
message.creating.primary.storage=Creating primary storage
message.creating.secondary.storage=Creating secondary storage
message.Zone.creation.complete=Zone creation complete
message.enabling.zone=Enabling zone
error.something.went.wrong.please.correct.the.following=Something went wrong; please correct the following
error.could.not.enable.zone=Could not enable zone
message.zone.creation.complete.would.you.like.to.enable.this.zone=Zone creation complete. Would you like to enable this zone?
message.please.add.at.lease.one.traffic.range=Please add at least one traffic range.
message.you.must.have.at.least.one.physical.network=You must have at least one physical network
message.please.select.a.different.public.and.management.network.before.removing=Please select a different public and management network before removing

label.zone.type=Zone Type
label.setup.zone=Setup Zone
label.setup.network=Setup Network
label.add.resources=Add Resources
label.launch=Launch
label.set.up.zone.type=Set up zone type
message.please.select.a.configuration.for.your.zone=Please select a configuration for your zone.
message.desc.basic.zone=Provide a single network where each VM instance is assigned an IP directly from the network. Guest isolation can be provided through layer-3 means such as security groups (IP address source filtering).
label.basic=Basic
message.desc.advanced.zone=For more sophisticated network topologies. This network model provides the most flexibility in defining guest networks and providing custom network offerings such as firewall, VPN, or load balancer support.
label.advanced=Advanced
message.desc.zone=A zone is the largest organizational unit in CloudStack, and it typically corresponds to a single datacenter. Zones provide physical isolation and redundancy. A zone consists of one or more pods (each of which contains hosts and primary storage servers) and a secondary storage server which is shared by all pods in the zone.
label.physical.network=Physical Network        
label.public.traffic=Public traffic     
label.guest.traffic=Guest Traffic
label.storage.traffic=Storage Traffic
message.setup.physical.network.during.zone.creation=When adding an advanced zone, you need to set up one or more physical networks. Each network corresponds to a NIC on the hypervisor. Each physical network can carry one or more types of traffic, with certain restrictions on how they may be combined.<br/><br/><strong>Drag and drop one or more traffic types</strong> onto each physical network.
label.add.physical.network=Add physical network
label.traffic.types=Traffic Types
label.management=Management
label.guest=Guest
label.please.specify.netscaler.info=Please specify Netscaler info
message.public.traffic.in.advanced.zone=Public traffic is generated when VMs in the cloud access the internet. Publicly-accessible IPs must be allocated for this purpose. End users can use the CloudStack UI to acquire these IPs to implement NAT between their guest network and their public network.<br/><br/>Provide at least one range of IP addresses for internet traffic.
message.public.traffic.in.basic.zone=Public traffic is generated when VMs in the cloud access the Internet or provide services to clients over the Internet. Publicly accessible IPs must be allocated for this purpose. When a instance is created, an IP from this set of Public IPs will be allocated to the instance in addition to the guest IP address. Static 1-1 NAT will be set up automatically between the public IP and the guest IP. End users can also use the CloudStack UI to acquire additional IPs to implement static NAT between their instances and the public IP.
message.add.pod.during.zone.creation=Each zone must contain in one or more pods, and we will add the first pod now. A pod contains hosts and primary storage servers, which you will add in a later step. First, configure a range of reserved IP addresses for CloudStack's internal management traffic. The reserved IP range must be unique for each zone in the cloud.
message.guest.traffic.in.advanced.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of VLAN IDs to carry guest traffic for each physical network.
message.guest.traffic.in.basic.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of IP addresses that CloudStack can assign to guest VMs. Make sure this range does not overlap the reserved system IP range.
message.storage.traffic=Traffic between CloudStack's internal resources, including any components that communicate with the Management Server, such as hosts and CloudStack system VMs. Please configure storage traffic here.
message.desc.cluster=Each pod must contain one or more clusters, and we will add the first cluster now. A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Each cluster consists of one or more hosts and one or more primary storage servers.
message.desc.host=Each cluster must contain at least one host (computer) for guest VMs to run on, and we will add the first host now. For a host to function in CloudStack, you must install hypervisor software on the host, assign an IP address to the host, and ensure the host is connected to the CloudStack management server.<br/><br/>Give the host's DNS or IP address, the user name (usually root) and password, and any labels you use to categorize hosts.
message.desc.primary.storage=Each cluster must contain one or more primary storage servers, and we will add the first one now. Primary storage contains the disk volumes for all the VMs running on hosts in the cluster. Use any standards-compliant protocol that is supported by the underlying hypervisor.
message.desc.secondary.storage=Each zone must have at least one NFS or secondary storage server, and we will add the first one now. Secondary storage stores VM templates, ISO images, and VM disk volume snapshots. This server must be available to all hosts in the zone.<br/><br/>Provide the IP address and exported path.
label.launch.zone=Launch zone 
message.please.wait.while.zone.is.being.created=Please wait while your zone is being created; this may take a while...

label.load.balancing=Load Balancing
label.static.nat.enabled=Static NAT Enabled
label.zones=Zones
label.view.more=View more
label.number.of.zones=Number of Zones
label.number.of.pods=Number of Pods
label.number.of.clusters=Number of Clusters
label.number.of.hosts=Number of Hosts
label.total.hosts=Total Hosts
label.total.CPU=Total CPU
label.total.memory=Total Memory
label.total.storage=Total Storage
label.purpose=Purpose




label.action.migrate.router=Migrate Router
label.action.migrate.router.processing=Migrating Router....
message.migrate.router.confirm=Please confirm the host you wish to migrate the router to:
label.migrate.router.to=Migrate Router to

label.action.migrate.systemvm=Migrate System VM
label.action.migrate.systemvm.processing=Migrating System VM....
message.migrate.systemvm.confirm=Please confirm the host you wish to migrate the system VM to:
label.migrate.systemvm.to=Migrate System VM to


mode=Mode
side.by.side=Side by Side
inline=Inline

extractable=Extractable

label.ocfs2=OCFS2

label.action.edit.host=Edit Host

network.rate=Network Rate

ICMP.type=ICMP Type
ICMP.code=ICMP Code

image.directory=Image Directory

label.action.create.template.from.vm=Create Template from VM
label.action.create.template.from.volume=Create Template from Volume

message.vm.create.template.confirm=Create Template will reboot the VM automatically.

label.action.manage.cluster=Manage Cluster
message.action.manage.cluster=Please confirm that you want to manage the cluster.
label.action.manage.cluster.processing=Managing Cluster....

label.action.unmanage.cluster=Unmanage Cluster
message.action.unmanage.cluster=Please confirm that you want to unmanage the cluster.
label.action.unmanage.cluster.processing=Unmanaging Cluster....

label.allocation.state=Allocation State
managed.state=Managed State

label.default.use=Default Use
label.host.tags=Host Tags 

label.cidr=CIDR
label.cidr.list=Source CIDR

label.storage.tags=Storage Tags

label.redundant.router=Redundant Router
label.is.redundant.router=Redundant

force.delete=Force Delete
force.delete.domain.warning=Warning: Choosing this option will cause the deletion of all child domains and all associated accounts and their resources.

force.remove=Force Remove
force.remove.host.warning=Warning: Choosing this option will cause CloudStack to forcefully stop all running virtual machines before removing this host from the cluster.

force.stop=Force Stop
force.stop.instance.warning=Warning: Forcing a stop on this instance should be your last option. It can lead to data loss as well as inconsistent behavior of the virtual machine state.

label.PreSetup=PreSetup
label.SR.name = SR Name-Label
label.SharedMountPoint=SharedMountPoint
label.clvm=CLVM
label.volgroup=Volume Group
label.VMFS.datastore=VMFS datastore

label.network.device=Network Device
label.add.network.device=Add Network Device
label.network.device.type=Network Device Type
label.DHCP.server.type=DHCP Server Type
label.Pxe.server.type=Pxe Server Type
label.PING.storage.IP=PING storage IP
label.PING.dir=PING Directory
label.TFTP.dir=TFTP Directory
label.PING.CIFS.username=PING CIFS username
label.PING.CIFS.password=PING CIFS password
label.CPU.cap=CPU Cap


label.action.enable.zone=Enable Zone
label.action.enable.zone.processing=Enabling Zone....
message.action.enable.zone=Please confirm that you want to enable this zone.
label.action.disable.zone=Disable Zone
label.action.disable.zone.processing=Disabling Zone....
message.action.disable.zone=Please confirm that you want to disable this zone.

label.action.enable.pod=Enable Pod
label.action.enable.pod.processing=Enabling Pod....
message.action.enable.pod=Please confirm that you want to enable this pod.
label.action.disable.pod=Disable Pod
label.action.disable.pod.processing=Disabling Pod....
message.action.disable.pod=Please confirm that you want to disable this pod.

label.action.enable.cluster=Enable Cluster
label.action.enable.cluster.processing=Enabling Cluster....
message.action.enable.cluster=Please confirm that you want to enable this cluster.
label.action.disable.cluster=Disable Cluster
label.action.disable.cluster.processing=Disabling Cluster....
message.action.disable.cluster=Please confirm that you want to disable this cluster.

label.account.id=Account ID
label.account.name=Account Name
label.account.specific=Account-Specific
label.account=Account
label.accounts=Accounts
label.acquire.new.ip=Acquire New IP
label.show.ingress.rule=Show Ingress Rule
label.hide.ingress.rule=Hide Ingress Rule
label.action.attach.disk.processing=Attaching Disk....
label.action.attach.disk=Attach Disk
label.action.attach.iso.processing=Attaching ISO....
label.action.attach.iso=Attach ISO
label.action.cancel.maintenance.mode.processing=Cancelling Maintenance Mode....
label.action.cancel.maintenance.mode=Cancel Maintenance Mode
label.action.change.password=Change Password
label.action.change.service.processing=Changing Service....
label.action.change.service=Change Service
label.action.copy.ISO.processing=Coping ISO....
label.action.copy.ISO=Copy ISO
label.action.copy.template.processing=Coping Template....
label.action.copy.template=Copy Template
label.action.create.template.processing=Creating Template....
label.action.create.template=Create Template
label.action.create.vm.processing=Creating VM....
label.action.create.vm=Create VM
label.action.create.volume.processing=Creating Volume....
label.action.create.volume=Create Volume
label.action.delete.IP.range.processing=Deleting IP Range....
label.action.delete.IP.range=Delete IP Range
label.action.delete.ISO.processing=Deleting ISO....
label.action.delete.ISO=Delete ISO
label.action.delete.account.processing=Deleting account....
label.action.delete.account=Delete account
label.action.delete.cluster.processing=Deleting Cluster....
label.action.delete.cluster=Delete Cluster
label.action.delete.disk.offering.processing=Deleting Disk Offering....
label.action.delete.disk.offering=Delete Disk Offering

label.action.update.resource.count=Update Resource Count
label.action.update.resource.count.processing=Updating Resource Count....

label.action.delete.domain=Delete Domain
label.action.delete.domain.processing=Deleting Domain....

label.action.delete.firewall.processing=Deleting Firewall....
label.action.delete.firewall=Delete firewall rule
label.action.delete.ingress.rule.processing=Deleting Ingress Rule....
label.action.delete.ingress.rule=Delete Ingress Rule
label.action.delete.load.balancer.processing=Deleting Load Balancer....
label.action.delete.load.balancer=Delete load balancer rule
label.action.edit.network.processing=Editing Network....
label.action.edit.network=Edit Network
label.action.delete.network.processing=Deleting Network....
label.action.delete.network=Delete Network
label.action.delete.pod.processing=Deleting Pod....
label.action.delete.pod=Delete Pod
label.action.delete.primary.storage.processing=Deleting Primary Storage....
label.action.delete.primary.storage=Delete Primary Storage
label.action.delete.secondary.storage.processing=Deleting Secondary Storage....
label.action.delete.secondary.storage=Delete Secondary Storage
label.action.delete.security.group.processing=Deleting Security Group....
label.action.delete.security.group=Delete Security Group
label.action.delete.service.offering.processing=Deleting Service Offering....
label.action.delete.service.offering=Delete Service Offering
label.action.delete.snapshot.processing=Deleting Snapshot....
label.action.delete.snapshot=Delete Snapshot
label.action.delete.template.processing=Deleting Template....
label.action.delete.template=Delete Template
label.action.delete.user.processing=Deleting User....
label.action.delete.user=Delete User
label.action.delete.volume.processing=Deleting Volume....
label.action.delete.volume=Delete Volume
label.action.delete.zone.processing=Deleting Zone....
label.action.delete.zone=Delete Zone
label.action.destroy.instance.processing=Destroying Instance....
label.action.destroy.instance=Destroy Instance
label.action.destroy.systemvm.processing=Destroying System VM....
label.action.destroy.systemvm=Destroy System VM
label.action.detach.disk.processing=Detaching Disk....
label.action.detach.disk=Detach Disk
label.action.detach.iso.processing=Detaching ISO....
label.action.detach.iso=Detach ISO
label.action.disable.account.processing=Disabling account....
label.action.disable.account=Disable account
label.action.disable.static.NAT.processing=Disabling Static NAT....
label.action.disable.static.NAT=Disable Static NAT
label.action.disable.user.processing=Disabling User....
label.action.disable.user=Disable User
label.action.download.ISO=Download ISO
label.action.download.template=Download Template
label.action.download.volume.processing=Downloading Volume....
label.action.download.volume=Download Volume
label.action.edit.ISO=Edit ISO
label.action.edit.account=Edit account
label.action.edit.disk.offering=Edit Disk Offering
label.action.edit.domain=Edit Domain
label.action.edit.global.setting=Edit Global Setting
label.action.edit.instance=Edit Instance
label.action.edit.network.offering=Edit Network Offering
label.action.edit.pod=Edit Pod
label.action.edit.primary.storage=Edit Primary Storage
label.action.edit.resource.limits=Edit Resource Limits
label.action.edit.service.offering=Edit Service Offering
label.action.edit.template=Edit Template
label.action.edit.user=Edit User
label.action.edit.zone=Edit Zone
label.action.enable.account.processing=Enabling account....
label.action.enable.account=Enable account
label.action.enable.maintenance.mode.processing=Enabling Maintenance Mode....
label.action.enable.maintenance.mode=Enable Maintenance Mode
label.action.enable.static.NAT.processing=Enabling Static NAT....
label.action.enable.static.NAT=Enable Static NAT
label.action.enable.user.processing=Enabling User....
label.action.enable.user=Enable User
label.action.force.reconnect.processing=Reconnecting....
label.action.force.reconnect=Force Reconnect
label.action.generate.keys.processing=Generate Keys....
label.action.generate.keys=Generate Keys
label.action.lock.account.processing=Locking account....
label.action.lock.account=Lock account
label.action.migrate.instance=Migrate Instance
label.action.migrate.instance.processing=Migrating Instance....
label.action.reboot.instance.processing=Rebooting Instance....
label.action.reboot.instance=Reboot Instance
label.action.reboot.router.processing=Rebooting Router....
label.action.reboot.router=Reboot Router
label.action.reboot.systemvm.processing=Rebooting System VM....
label.action.reboot.systemvm=Reboot System VM
label.action.recurring.snapshot=Recurring Snapshots
label.action.release.ip.processing=Releasing IP....
label.action.release.ip=Release IP
label.action.remove.host.processing=Removing Host....
label.action.remove.host=Remove Host
label.action.reset.password.processing=Resetting Password....
label.action.reset.password=Reset Password
label.action.resource.limits=Resource limits
label.action.restore.instance.processing=Restoring Instance....
label.action.restore.instance=Restore Instance
label.action.start.instance.processing=Starting Instance....
label.action.start.instance=Start Instance
label.action.start.router.processing=Starting Router....
label.action.start.router=Start Router
label.action.start.systemvm.processing=Starting System VM....
label.action.start.systemvm=Start System VM
label.action.stop.instance.processing=Stopping Instance....
label.action.stop.instance=Stop Instance
label.action.stop.router.processing=Stopping Router....
label.action.stop.router=Stop Router
label.action.stop.systemvm.processing=Stopping System VM....
label.action.stop.systemvm=Stop System VM
label.action.take.snapshot.processing=Taking Snapshot....
label.action.take.snapshot=Take Snapshot
label.action.update.OS.preference.processing=Updating OS Preference....
label.action.update.OS.preference=Update OS Preference
label.actions=Actions
label.active.sessions=Active Sessions
label.add.account=Add Account
label.add.by.cidr=Add By CIDR
label.add.by.group=Add By Group
label.add.cluster=Add Cluster
label.add.direct.iprange=Add Direct Ip Range
label.add.disk.offering=Add Disk Offering
label.add.domain=Add Domain
label.add.firewall=Add firewall rule
label.add.host=Add Host
label.add.ingress.rule=Add Ingress Rule
label.add.ip.range=Add IP Range
label.add.load.balancer=Add Load Balancer
label.add.more=Add More
label.add.network=Add Network
label.add.pod=Add Pod
label.add.primary.storage=Add Primary Storage
label.add.secondary.storage=Add Secondary Storage
label.add.security.group=Add Security Group
label.add.service.offering=Add Service Offering
label.add.template=Add Template
label.add.user=Add User
label.add.vlan=Add VLAN
label.add.volume=Add Volume
label.add.zone=Add Zone
label.add=Add
label.adding.cluster=Adding Cluster
label.adding.failed=Adding Failed
label.adding.pod=Adding Pod
label.adding.processing=Adding....
label.adding.succeeded=Adding Succeeded
label.adding.user=Adding User
label.adding.zone=Adding Zone
label.adding=Adding
label.additional.networks=Additional Networks
label.admin.accounts=Admin Accounts
label.admin=Admin
label.advanced.mode=Advanced Mode
label.advanced.search=Advance Search
label.advanced=Advanced
label.alert=Alert
label.algorithm=Algorithm
label.allocated=Allocated
label.api.key=API Key
label.assign.to.load.balancer=Assigning instance to load balancer
label.assign=Assign
label.associated.network.id=Associated Network ID
label.attached.iso=Attached ISO
label.availability.zone=Availability Zone
label.availability=Availability
label.available.public.ips=Available Public IP Addresses
label.available=Available
label.back=Back
label.basic.mode=Basic Mode
label.bootable=Bootable
label.broadcast.domain.type=Broadcast Domain Type
label.by.account=By Account
label.by.availability=By Availability
label.by.domain=By Domain
label.by.end.date=By End Date
label.by.level=By Level
label.by.pod=By Pod
label.by.role=By Role
label.by.start.date=By Start Date
label.by.state=By State
label.by.traffic.type=By Traffic Type
label.by.type.id=By Type ID
label.by.type=By Type
label.by.zone=By Zone
label.bytes.received=Bytes Received
label.bytes.sent=Bytes Sent
label.cancel=Cancel
label.certificate=Certificate
label.privatekey=PKCS#8 Private Key
label.domain.suffix=DNS Domain Suffix (i.e., xyz.com)
label.character=Character
label.cidr.account=CIDR or Account/Security Group
label.close=Close
label.cloud.console=Cloud Management Console
label.cloud.managed=Cloud.com Managed
label.cluster.type=Cluster Type
label.cluster=Cluster
label.code=Code
label.confirmation=Confirmation
label.cpu.allocated.for.VMs=CPU Allocated for VMs
label.cpu.allocated=CPU Allocated
label.cpu.utilized=CPU Utilized
label.cpu=CPU
label.created=Created
label.cross.zones=Cross Zones
label.custom.disk.size=Custom Disk Size
label.daily=Daily
label.data.disk.offering=Data Disk Offering
label.date=Date
label.day.of.month=Day of Month
label.day.of.week=Day of Week
label.delete=Delete
label.deleting.failed=Deleting Failed
label.deleting.processing=Deleting....
label.description=Description
label.detaching.disk=Detaching Disk
label.details=Details
label.device.id=Device ID
label.disabled=Disabled
label.disabling.vpn.access=Disabling VPN Access
label.disk.allocated=Disk Allocated
label.disk.offering=Disk Offering
label.disk.size.gb=Disk Size (in GB)
label.disk.size=Disk Size
label.disk.total=Disk Total
label.disk.volume=Disk Volume
label.display.text=Display Text
label.dns.1=DNS 1
label.dns.2=DNS 2
label.domain.admin=Domain Admin
label.domain.id=Domain ID
label.domain.name=Domain Name
label.domain=Domain
label.double.quotes.are.not.allowed=Double quotes are not allowed
label.download.progress=Download Progress
label.edit=Edit
label.email=Email
label.enabling.vpn.access=Enabling VPN Access
label.enabling.vpn=Enabling VPN
label.end.port=End Port
label.endpoint.or.operation=Endpoint or Operation
label.error.code=Error Code
label.error=Error
label.esx.host=ESX/ESXi Host
label.example=Example
label.failed=Failed
label.featured=Featured
label.firewall=Firewall
label.first.name=First Name
label.format=Format
label.friday=Friday
label.full=Full
label.gateway=Gateway
label.general.alerts=General Alerts
label.generating.url=Generating URL
label.go.step.2=Go to Step 2
label.go.step.3=Go to Step 3
label.go.step.4=Go to Step 4
label.go.step.5=Go to Step 5
label.group.optional=Group (Optional)
label.group=Group
label.guest.cidr=Guest CIDR
label.guest.gateway=Guest Gateway
label.guest.ip.range=Guest IP Range
label.guest.ip=Guest IP Address
label.guest.netmask=Guest Netmask
label.ha.enabled=HA Enabled
label.help=Help
label.host.alerts=Host Alerts
label.host.name=Host Name
label.host=Host
label.hosts=Hosts
label.hourly=Hourly
label.hypervisor.type=Hypervisor Type
label.hypervisor=Hypervisor
label.id=ID
label.info=Info
label.ingress.rule=Ingress Rule
label.initiated.by=Initiated By
label.instance.limits=Instance Limits
label.instance.name=Instance Name
label.instance=Instance
label.instances=Instances
label.internal.dns.1=Internal DNS 1
label.internal.dns.2=Internal DNS 2
label.interval.type=Interval Type
label.invalid.integer=Invalid Integer
label.invalid.number=Invalid Number
label.ip.address=IP Address
label.ip.allocations=IP Allocations
label.ip.limits=Public IP Limits
label.ip.or.fqdn=IP or FQDN
label.ip.range=IP Range
label.ip=IP
label.ips=IPs
label.is.default=Is Default
label.is.shared=Is Shared
label.is.system=Is System
label.iscsi=iSCSI
label.iso.boot=ISO Boot
label.iso=ISO
label.isolation.mode=Isolation Mode
label.keep=Keep
label.lang.chinese=Chinese (Simplified)
label.lang.english=English
label.lang.japanese=Japanese
label.lang.spanish=Spanish
label.lang.russian=Russian
label.lang.french=French
label.lang.brportugese=Brazilian Portugese
label.last.disconnected=Last Disconnected
label.last.name=Last Name
label.level=Level
label.linklocal.ip=Link Local IP Adddress
label.load.balancer=Load Balancer
label.loading=Loading
label.local=Local
label.local.storage.enabled=Local Storage Enabled
label.login=Login
label.logout=Logout
label.lun=LUN
label.manage=Manage
label.maximum=Maximum
label.memory.allocated=Memory Allocated
label.memory.total=Memory Total
label.memory.used=Memory Used
label.memory=Memory
label.menu.accounts=Accounts
label.menu.alerts=Alerts
label.menu.all.accounts=All Accounts
label.menu.all.instances=All Instances
label.menu.community.isos=Community ISOs
label.menu.community.templates=Community Templates
label.menu.configuration=Configuration
label.menu.dashboard=Dashboard
label.menu.destroyed.instances=Destroyed Instances
label.menu.disk.offerings=Disk Offerings
label.menu.domains=Domains
label.menu.events=Events
label.menu.featured.isos=Featured ISOs
label.menu.featured.templates=Featured Templates
label.menu.global.settings=Global Settings
label.menu.instances=Instances
label.menu.ipaddresses=IP Addresses
label.menu.isos=ISOs
label.menu.my.accounts=My Accounts
label.menu.my.instances=My Instances
label.menu.my.isos=My ISOs
label.menu.my.templates=My Templates
label.menu.network.offerings=Network Offerings
label.menu.network=Network
label.menu.physical.resources=Physical Resources
label.menu.running.instances=Running Instances
label.menu.security.groups=Security Groups
label.menu.service.offerings=Service Offerings
label.menu.snapshots=Snapshots
label.menu.stopped.instances=Stopped Instances
label.menu.storage=Storage
label.menu.system.vms=System VMs
label.menu.system=System
label.menu.templates=Templates
label.menu.virtual.appliances=Virtual Appliances
label.menu.virtual.resources=Virtual Resources
label.menu.volumes=Volumes
label.migrate.instance.to=Migrate instance to
label.minimum=Minimum
label.minute.past.hour=minute(s) Past the Hour
label.monday=Monday
label.monthly=Monthly
label.more.templates=More Templates
label.my.account=My Account
label.name.optional=Name (Optional)
label.name=Name
label.netmask=Netmask
label.network.desc=Network Desc
label.network.domain=Network Domain
label.network.id=Network ID
label.network.name=Network Name
label.network.offering.display.text=Network Offering Display Text
label.network.offering.id=Network Offering ID
label.network.offering.name=Network Offering Name
label.network.offering=Network Offering
label.network.rate=Network Rate
label.network.read=Network Read
label.network.type=Network Type
label.network.write=Network Write
label.network=Network
label.new.password=New Password
label.next=Next
label.nfs.server=NFS Server
label.nfs.storage=NFS Storage
label.nfs=NFS
label.nics=NICs
label.no.actions=No Available Actions
label.no.alerts=No Recent Alerts
label.no.errors=No Recent Errors
label.no.isos=No available ISOs
label.no.items=No Available Items
label.no.security.groups=No Available Security Groups
label.no.thanks=No Thanks
label.no=No
label.none=None
label.not.found=Not Found
label.num.cpu.cores=# of CPU Cores
label.numretries=Number of Retries
label.offer.ha=Offer HA
label.optional=Optional
label.os.preference=OS Preference
label.os.type=OS Type
label.owned.public.ips=Owned Public IP Addresses
label.owner.account=Owner Account
label.owner.domain=Owner Domain  
label.parent.domain=Parent Domain
label.password.enabled=Password Enabled
label.password=Password
label.path=Path
label.please.wait=Please Wait
label.pod=Pod
label.port.forwarding=Port Forwarding
label.port.range=Port Range
label.prev=Prev
label.primary.allocated=Primary Storage Allocated
label.primary.network=Primary Network
label.primary.storage=Primary Storage
label.primary.used=Primary Storage Used
label.private.interface=Private Interface
label.private.ip.range=Private IP Range
label.private.ip=Private IP Address
label.private.ips=Private IP Addresses
label.private.port=Private Port
label.private.zone=Private Zone
label.protocol=Protocol
label.public.interface=Public Interface
label.public.ip=Public IP Address
label.public.ips=Public IP Addresses
label.public.port=Public Port
label.public.zone=Public Zone
label.public=Public
label.recent.errors=Recent Errors
label.refresh=Refresh
label.related=Related
label.remove.from.load.balancer=Removing instance from load balancer
label.removing.user=Removing User
label.required=Required
label.reserved.system.ip=Reserved System IP
label.resource.limits=Resource Limits
label.resource=Resource
label.resources=Resources
label.role=Role
label.root.disk.offering=Root Disk Offering
label.running.vms=Running VMs
label.saturday=Saturday
label.save=Save
label.saving.processing=Saving....
label.scope=Scope
label.search=Search
label.secondary.storage=Secondary Storage
label.secondary.used=Secondary Storage Used
label.secret.key=Secret Key
label.security.group.name=Security Group Name
label.security.group=Security Group
label.security.groups.enabled=Security Groups Enabled
label.security.groups=Security Groups
label.sent=Sent
label.server=Server
label.service.offering=Service Offering
label.system.service.offering=System Service Offering
label.session.expired=Session Expired
label.shared=Shared
label.size=Size
label.snapshot.limits=Snapshot Limits
label.snapshot.name=Snapshot Name
label.snapshot.s=Snapshot (s)
label.snapshot.schedule=Setup Recurring Snapshot
label.snapshot=Snapshot
label.snapshots=Snapshots
label.source.nat=Source NAT
label.specify.vlan=Specify VLAN
label.start.port=Start Port
label.state=State
label.static.nat.to=Static NAT to
label.static.nat=Static NAT
label.statistics=Statistics
label.status=Status
label.step.1.title=Step 1: <strong>Select a Template</strong>
label.step.1=Step 1
label.step.2.title=Step 2: <strong>Service Offering</strong>
label.step.2=Step 2
label.step.3.title=Step 3: <strong id="step3_label">Select a Disk Offering</strong>
label.step.3=Step 3
label.step.4.title=Step 4: <strong>Network</strong>
label.step.4=Step 4
label.step.5.title=Step 5: <strong>Review</strong>
label.step.5=Step 5
label.stopped.vms=Stopped VMs
label.storage.type=Storage Type
label.storage=Storage
label.submit=Submit
label.submitted.by=[Submitted by: <span id="submitted_by"></span>]
label.succeeded=Succeeded
label.sunday=Sunday
label.system.capacity=System Capacity
label.system.vm.type=System VM Type
label.system.vm=System VM
label.system.vms=System VMs
label.tagged=Tagged
label.tags=Tags
label.target.iqn=Target IQN
label.template.limits=Template Limits
label.template=Template
label.theme.default=Default Theme
label.theme.grey=Custom - Grey
label.theme.lightblue=Custom - Light Blue
label.thursday=Thursday
label.time.zone=Timezone
label.time=Time
label.timeout.in.second = Timeout(seconds)
label.timezone=Timezone
label.total.cpu=Total CPU
label.total.vms=Total VMs
label.traffic.type=Traffic Type
label.tuesday=Tuesday
label.type.id=Type ID
label.type=Type
label.unavailable=Unavailable
label.unlimited=Unlimited
label.untagged=Untagged
label.update.ssl.cert=Update SSL Certificate
label.update.ssl=Update SSL Certificate
label.updating=Updating
label.url=URL
label.usage.interface=Usage Interface
label.used=Used
label.user=User
label.username=Username
label.users=Users
label.value=Value
label.vcenter.cluster=vCenter Cluster
label.vcenter.datacenter=vCenter Datacenter
label.vcenter.datastore=vCenter Datastore
label.vcenter.host=vCenter Host
label.vcenter.password=vCenter Password
label.vcenter.username=vCenter Username
label.version=Version
label.virtual.appliance=Virtual Appliance
label.virtual.appliances=Virtual Appliances
label.virtual.network=Virtual Network
label.vlan.id=VLAN ID
label.vlan.range=VLAN Range
label.vm.add=Add Instance
label.vm.destroy=Destroy
label.vm.reboot=Reboot
label.vm.start=Start
label.vm.stop=Stop
label.vmfs=VMFS
label.vms=VMs
label.volume.limits=Volume Limits
label.volume.name=Volume Name
label.volume=Volume
label.volumes=Volumes
label.vsphere.managed=vSphere Managed
label.waiting=Waiting
label.warn=Warn
label.wednesday=Wednesday
label.weekly=Weekly
label.welcome.cloud.console=Welcome to Management Console
label.welcome=Welcome
label.yes=Yes
label.zone.id=Zone ID
label.zone.step.1.title=Step 1: <strong>Select a Network</strong>
label.zone.step.2.title=Step 2: <strong>Add a Zone</strong>
label.zone.step.3.title=Step 3: <strong>Add a Pod</strong>
label.zone.step.4.title=Step 4: <strong>Add an IP range</strong>
label.zone.wide=Zone-Wide
label.zone=Zone

#Messages
message.acquire.public.ip=Please select a zone from which you want to acquire your new IP from.
message.action.cancel.maintenance.mode=Please confirm that you want to cancel this maintenance.
message.action.cancel.maintenance=Your host has been successfully canceled for maintenance. This process can take up to several minutes.
message.action.delete.ISO.for.all.zones=The ISO is used by all zones. Please confirm that you want to delete it from all zones.
message.action.delete.ISO=Please confirm that you want to delete this ISO.
message.action.delete.cluster=Please confirm that you want to delete this cluster.
message.action.delete.disk.offering=Please confirm that you want to delete this disk offering.
message.action.delete.domain=Please confirm that you want to delete this domain.
message.action.delete.external.firewall=Please confirm that you would like to remove this external firewall. Warning: If you are planning to add back the same external firewall, you must reset usage data on the device.
message.action.delete.external.load.balancer=Please confirm that you would like to remove this external load balancer. Warning: If you are planning to add back the same external load balancer, you must reset usage data on the device.
message.action.delete.ingress.rule=Please confirm that you want to delete this ingress rule.
message.action.delete.network=Please confirm that you want to delete this network.
message.action.delete.pod=Please confirm that you want to delete this pod.
message.action.delete.primary.storage=Please confirm that you want to delete this primary storage.
message.action.delete.secondary.storage=Please confirm that you want to delete this secondary storage.
message.action.delete.security.group=Please confirm that you want to delete this security group.
message.action.delete.service.offering=Please confirm that you want to delete this service offering.
message.action.delete.snapshot=Please confirm that you want to delete this snapshot.
message.action.delete.template.for.all.zones=The template is used by all zones. Please confirm that you want to delete it from all zones.
message.action.delete.template=Please confirm that you want to delete this template.
message.action.delete.volume=Please confirm that you want to delete this volume.
message.action.delete.zone=Please confirm that you want to delete this zone.
message.action.destroy.instance=Please confirm that you want to destroy this instance.
message.action.destroy.systemvm=Please confirm that you want to destroy this System VM.
message.action.disable.static.NAT=Please confirm that you want to disable static NAT.
message.action.enable.maintenance=Your host has been successfully prepared for maintenance.  This process can take up to several minutes or longer depending on how many VMs are currently on this host.
message.action.force.reconnect=Your host has been successfully forced to reconnect.  This process can take up to several minutes.
message.action.host.enable.maintenance.mode=Enabling maintenance mode will cause a live migration of all running instances on this host to any available host.
message.action.instance.reset.password=Please confirm that you want to change the ROOT password for this virtual machine.  
message.action.primarystorage.enable.maintenance.mode=Warning: placing the primary storage into maintenance mode will cause all VMs using volumes from it to be stopped.  Do you want to continue?
message.action.reboot.instance=Please confirm that you want to reboot this instance.
message.action.reboot.systemvm=Please confirm that you want to reboot this system VM.
message.action.release.ip=Please confirm that you want to release this IP.
message.action.remove.host=Removing last/only host in cluster and reinstalling the host will destroy working environment/database on the host and render the VM Guests unuseable.
message.action.restore.instance=Please confirm that you want to restore this instance.
message.action.start.instance=Please confirm that you want to start this instance.
message.action.start.router=Please confirm that you want to start this router.
message.action.start.systemvm=Please confirm that you want to start this system VM.
message.action.stop.instance=Please confirm that you want to stop this instance.
message.action.stop.systemvm=Please confirm that you want to stop this system VM.
message.action.take.snapshot=Please confirm that you want to take a snapshot of this volume.
message.add.cluster.zone=Add a hypervisor managed cluster for zone <b><span id="zone_name"></span></b>
message.add.cluster=Add a hypervisor managed cluster for zone <b><span id="zone_name"></span></b>, pod <b><span id="pod_name"></span></b>
message.add.disk.offering=Please specify the following parameters to add a new disk offering
message.add.firewall=Add a firewall to zone
message.add.host=Please specify the following parameters to add a new host
message.add.ip.range.direct.network=Add an IP range to direct network <b><span id="directnetwork_name"></span></b> in zone <b><span id="zone_name"></span></b>
message.add.ip.range.to.pod=<p>Add an IP range to pod: <b><span id="pod_name_label"></span></b></p>
message.add.ip.range=Add an IP range to public network in zone
message.add.load.balancer=Add a load balancer to zone
message.add.network=Add a new network for zone: <b><span id="zone_name"></span></b>
message.add.pod=Add a new pod for zone <b><span id="add_pod_zone_name"></span></b>
message.add.primary.storage=Add a new Primary Storage for zone <b><span id="zone_name"></span></b>, pod <b><span id="pod_name"></span></b>
message.add.primary=Please specify the following parameters to add a new primary storage
message.add.secondary.storage=Add a new storage for zone <b><span id="zone_name"></span></b>
message.add.service.offering=Please fill in the following data to add a new compute offering.
message.add.template=Please enter the following data to create your new template
message.add.volume=Please fill in the following data to add a new volume.
message.additional.networks.desc=Please select additional network(s) that your virtual instance will be connected to.
message.advanced.mode.desc=Choose this network model if you wish to enable VLAN support.  This network model provides the most flexibility in allowing administrators to provide custom network offerings such as providing firewall, vpn, or load balancer support as well as enabling direct vs virtual networking.
message.advanced.security.group=Choose this if you wish to use security groups to provide guest VM isolation.
message.advanced.virtual=Choose this if you wish to use zone-wide VLANs to provide guest VM isolation.
message.allow.vpn.access=Please enter a username and password of the user that you want to allow VPN access.
message.attach.iso.confirm=Please confirm that you want to attach the ISO to this virtual instance.
message.attach.volume=Please fill in the following data to attach a new volume. If you are attaching a disk volume to a Windows based virtual machine, you will need to reboot the instance to see the attached disk.
message.basic.mode.desc=Choose this network model if you do <b>*<u>not</u>*</b> want to enable any VLAN support.  All virtual instances created under this network model will be assigned an IP directly from the network and security groups are used to provide security and segregation.
message.change.offering.confirm=Please confirm that you wish to change the service offering of this virtual instance.
message.copy.iso.confirm=Please confirm that you wish to copy your ISO to
message.copy.template=Copy template <b id="copy_template_name_text">XXX</b> from zone <b id="copy_template_source_zone_text"></b> to
message.create.template.vm=Create VM from template <b id="p_name"></b>
message.create.template.volume=Please specify the following information before creating a template of your disk volume: <b><span id="volume_name"></span></b>. Creation of the template can range from several minutes to longer depending on the size of the volume.
message.delete.account=Please confirm that you want to delete this account.
message.detach.iso.confirm=Please confirm that you want to detach the ISO from this virtual instance.
message.disable.account=Please confirm that you want to disable this account.  By disabling the account, all users for this account will no longer have access to their cloud resources.  All running virtual machines will be immediately shut down. 
message.disable.vpn.access=Please confirm that you want to disable VPN Access.
message.download.ISO=Please click <a href="#">00000</a> to download ISO    
message.download.template=Please click <a href="#">00000</a> to download template 
message.download.volume=Please click <a href="#">00000</a> to download volume
message.edit.confirm=Please confirm that your changes before clicking "Save".
message.edit.limits=Please specify limits to the following resources.  A "-1" indicates no limit to the amount of resources create.
message.enable.account=Please confirm that you want to enable this account.
message.enable.vpn.access=VPN is currently disabled for this IP Address.  Would you like to enable VPN access?
message.enabled.vpn.ip.sec=Your IPSec pre-shared key is
message.enabled.vpn=Your VPN access is currently enabled and can be accessed via the IP
message.launch.vm.on.private.network=Do you wish to launch your instance on your own private dedicated network? 
message.lock.account=Please confirm that you want to lock this account.  By locking the account, all users for this account will no longer be able to manage their cloud resources.  Existing resources can still be accessed.
message.migrate.instance.confirm=Please confirm the host you wish to migrate the virtual instance to.
message.new.user=Specify the following to add a new user to the account 
message.no.network.support.configuration.not.true=You do not have any zone that has security group enabled. Thus, no additional network features.  Please continue to step 5.
message.no.network.support=Your selected hypervisor, vSphere, does not have any additional network features.  Please continue to step 5.
message.number.clusters=<h2><span> # of </span> Clusters</h2>
message.number.hosts=<h2><span> # of </span> Hosts</h2>
message.number.pods=<h2><span> # of </span> Pods</h2>
message.number.storage=<h2><span> # of </span> Primary Storage Volumes</h2>
message.number.zones=<h2><span> # of </span> Zones</h2>
message.remove.vpn.access=Please confirm that you want to remove VPN access from the following user.
message.restart.mgmt.server=Please restart your management server(s) for your new settings to take effect.
message.restart.mgmt.usage.server=Please restart your management server(s) and usage server(s) for your new settings to take effect.
message.security.group.usage=(Use <strong>Ctrl-click</strong> to select all applicable security groups)
message.snapshot.schedule=You can setup recurring snapshot schedules by selecting from the available options below and applying your policy preference
message.step.1.continue=Please select a template or ISO to continue
message.step.1.desc=Please select a template for your new virtual instance. You can also choose to select a blank template from which an ISO image can be installed onto.
message.step.2.continue=Please select a service offering to continue
message.step.2.desc=
message.step.3.continue=Please select a disk offering to continue
message.step.3.desc=
message.step.4.continue=Please select at least one network to continue
message.step.4.desc=Please select the primary network that your virtual instance will be connected to.
message.update.os.preference=Please choose a OS preference for this host.  All virtual instances with similar preferences will be first allocated to this host before choosing another.
message.update.ssl=Please submit a new X.509 compliant SSL certificate to be updated to each console proxy virtual instance:
message.virtual.network.desc=A dedicated virtualized network for your account.  The broadcast domain is contained within a VLAN and all public network access is routed out by a virtual router.
message.volume.create.template.confirm=Please confirm that you wish to create a template for this disk volume.  Creation of the template can range from several minutes to longer depending on the size of the volume.
message.zone.step.1.desc=Please select a network model for your zone.
message.zone.step.2.desc=Please enter the following info to add a new zone 
message.zone.step.3.desc=Please enter the following info to add a new pod 
message.apply.snapshot.policy=You have successfully updated your current snapshot policy.
message.disable.snapshot.policy=You have successfully disabled your current snapshot policy.
message.action.change.service.warning.for.instance=Your instance must be stopped before attempting to change its current service offering.
message.action.change.service.warning.for.router=Your router must be stopped before attempting to change its current service offering.
message.action.reset.password.warning=Your instance must be stopped before attempting to change its current password.
message.action.reset.password.off=Your instance currently does not support this feature.

#Errors
error.login=Your username/password does not match our records.
error.menu.select=Unable to perform action due to no items being selected. 
error.mgmt.server.inaccessible=The Management Server is unaccessible.  Please try again later.
error.session.expired=Your session has expired.
error.unresolved.internet.name=Your internet name cannot be resolved.