cloudstack/docs/pot/nfs-shares-on-management-server.pot

#Licensed to the Apache Software Foundation (ASF) under one
#or more contributor license agreements.  See the NOTICE file
#distributed with this work for additional information
#regarding copyright ownership.  The ASF licenses this file
#to you under the Apache License, Version 2.0 (the
#"License"); you may not use this file except in compliance
#with the License.  You may obtain a copy of the License at
#http://www.apache.org/licenses/LICENSE-2.0
#Unless required by applicable law or agreed to in writing,
#software distributed under the License is distributed on an
#"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
#KIND, either express or implied.  See the License for the
#specific language governing permissions and limitations
#under the License.
msgid ""
msgstr ""
"Project-Id-Version: 0\n"
"POT-Creation-Date: 2013-02-02T20:11:59\n"
"PO-Revision-Date: 2013-02-02T20:11:59\n"
"Last-Translator: Automatically generated\n"
"Language-Team: None\n"
"MIME-Version: 1.0\n"
"Content-Type: application/x-publican; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"

#. Tag: title
#, no-c-format
msgid "Using the Management Server as the NFS Server"
msgstr ""

#. Tag: para
#, no-c-format
msgid "This section tells how to set up NFS shares for primary and secondary storage on the same node with the Management Server. This is more typical of a trial installation, but is technically possible in a larger deployment. It is assumed that you will have less than 16TB of storage on the host."
msgstr ""

#. Tag: para
#, no-c-format
msgid "The exact commands for the following steps may vary depending on your operating system version."
msgstr ""

#. Tag: para
#, no-c-format
msgid "On Ubuntu/Debian systems, you'll need to install the nfs-kernel-server package:"
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "\n"
"$ sudo apt-get install nfs-kernel-server\n"
"        "
msgstr ""

#. Tag: para
#, no-c-format
msgid "On the Management Server host, create two directories that you will use for primary and secondary storage. For example:"
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "\n"
"# mkdir -p /export/primary\n"
"# mkdir -p /export/secondary\n"
"        "
msgstr ""

#. Tag: para
#, no-c-format
msgid "To configure the new directories as NFS exports, edit /etc/exports. Export the NFS share(s) with rw,async,no_root_squash. For example:"
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "# vi /etc/exports"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Insert the following line."
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "/export  *(rw,async,no_root_squash)"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Export the /export directory."
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "# exportfs -a"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Edit the /etc/sysconfig/nfs file."
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "# vi /etc/sysconfig/nfs"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Uncomment the following lines:"
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "\n"
"LOCKD_TCPPORT=32803\n"
"LOCKD_UDPPORT=32769\n"
"MOUNTD_PORT=892\n"
"RQUOTAD_PORT=875\n"
"STATD_PORT=662\n"
"STATD_OUTGOING_PORT=2020\n"
"            "
msgstr ""

#. Tag: para
#, no-c-format
msgid "Edit the /etc/sysconfig/iptables file."
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "# vi /etc/sysconfig/iptables"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Add the following lines at the beginning of the INPUT chain where <NETWORK> is the network that you'll be using:"
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p udp --dport 111 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p tcp --dport 111 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p tcp --dport 2049 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p tcp --dport 32803 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p udp --dport 32769 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p tcp --dport 892 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p udp --dport 892 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p tcp --dport 875 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p udp --dport 875 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p tcp --dport 662 -j ACCEPT\n"
"-A INPUT -s <NETWORK> -m state --state NEW -p udp --dport 662 -j ACCEPT                \n"
"            "
msgstr ""

#. Tag: para
#, no-c-format
msgid "Run the following commands:"
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "\n"
"# service iptables restart\n"
"# service iptables save\n"
"            "
msgstr ""

#. Tag: para
#, no-c-format
msgid "If NFS v4 communication is used between client and server, add your domain to /etc/idmapd.conf on both the hypervisor host and Management Server."
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "# vi /etc/idmapd.conf"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Remove the character # from the beginning of the Domain line in idmapd.conf and replace the value in the file with your own domain. In the example below, the domain is company.com."
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "Domain = company.com"
msgstr ""

#. Tag: para
#, no-c-format
msgid "Reboot the Management Server host."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Two NFS shares called /export/primary and /export/secondary are now set up."
msgstr ""

#. Tag: para
#, no-c-format
msgid "It is recommended that you test to be sure the previous steps have been successful."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Log in to the hypervisor host."
msgstr ""

#. Tag: para
#, no-c-format
msgid "Be sure NFS and rpcbind are running. The commands might be different depending on your OS. For example:"
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "\n"
"# service rpcbind start\n"
"# service nfs start\n"
"# chkconfig nfs on\n"
"# chkconfig rpcbind on\n"
"# reboot                        \n"
"                    "
msgstr ""

#. Tag: para
#, no-c-format
msgid "Log back in to the hypervisor host and try to mount the /export directories. For example (substitute your own management server name):"
msgstr ""

#. Tag: programlisting
#, no-c-format
msgid "\n"
"# mkdir /primarymount\n"
"# mount -t nfs <management-server-name>:/export/primary /primarymount\n"
"# umount /primarymount\n"
"# mkdir /secondarymount\n"
"# mount -t nfs <management-server-name>:/export/secondary /secondarymount\n"
"# umount /secondarymount                        \n"
"                    "
msgstr ""