%BOOK_ENTITIES; ]>

These steps assume you have already logged in to the &PRODUCT; UI. To configure the base guest network: In the left navigation, choose Infrastructure. On Zones, click View More, then click the zone to which you want to add a network. Click the Network tab. Click Add network. Provide the following information: Name. The name of the network. This will be user-visible Description: The description of the network. This will be user-visible VLAN ID: Enter an administrator-configured VLAN ID so you can create different networks for use by different VM users in the zone Scope: Choose account-specific or domain-specific if you would like to make the network accessible to only a single account or domain. Choose zone-wide if all accounts with access to the zone should be able to access the network. Domain/Account: If Scope is account-specific, enter the domain and account name for the account Network offering: If the administrator has configured multiple network offerings, select the one you want to use for this network Gateway: The gateway that the guests should use Netmask: The netmask in use on the subnet the guests will use Start IP/End IP: Enter the first and last IP addresses that define a range that &PRODUCT; can assign to guests. If one NIC is used, these IPs should be in the same CIDR as the pod CIDR. If multiple NICs are used, they may be in a different subnet. Network Domain: (Optional) If you want to assign a special domain name to this network, specify the DNS suffix. Click OK.