# Licensed to the Apache Software Foundation (ASF) under one # or more contributor license agreements. See the NOTICE file # distributed with this work for additional information # regarding copyright ownership. The ASF licenses this file # to you under the Apache License, Version 2.0 (the # "License"); you may not use this file except in compliance # with the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, # software distributed under the License is distributed on an # "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY # KIND, either express or implied. See the License for the # specific language governing permissions and limitations # under the License. #new labels (begin) ********************************************************************************************** #new labels (end) ************************************************************************************************ #modified labels (begin) ***************************************************************************************** #modified labels (end) ******************************************************************************************* message.zoneWizard.enable.local.storage=WARNING: If you enable local storage for this zone, you must do the following, depending on where you would like your system VMs to launch:

1. If system VMs need to be launched in primary storage, primary storage needs to be added to the zone after creation. You must also start the zone in a disabled state.

2. If system VMs need to be launched in local storage, system.vm.use.local.storage needs to be set to true before you enable the zone.


Would you like to continue? label.local.storage.enabled=Local storage enabled label.tier.details=Tier details label.edit.tags=Edit tags label.action.enable.physical.network=Enable physical network label.action.disable.physical.network=Disable physical network message.action.enable.physical.network=Please confirm that you want to enable this physical network. message.action.disable.physical.network=Please confirm that you want to disable this physical network. label.select.tier=Select Tier label.add.ACL=Add ACL label.remove.ACL=Remove ACL label.tier=Tier label.network.ACL=Network ACL label.network.ACL.total=Network ACL Total label.add.new.gateway=Add new gateway message.add.new.gateway.to.vpc=Please specify the information to add a new gateway to this VPC. label.delete.gateway=delete gateway message.delete.gateway=Please confirm you want to delete the gateway label.CIDR.of.destination.network=CIDR of destination network label.add.route=Add route label.add.static.route=Add static route label.remove.static.route=Remove static route label.site.to.site.VPN=site-to-site VPN label.add.VPN.gateway=Add VPN Gateway message.add.VPN.gateway=Please confirm that you want to add a VPN Gateway label.VPN.gateway=VPN Gateway label.delete.VPN.gateway=delete VPN Gateway message.delete.VPN.gateway=Please confirm that you want to delete this VPN Gateway label.VPN.connection=VPN Connection label.IPsec.preshared.key=IPsec Preshared-Key label.IKE.policy=IKE policy label.ESP.policy=ESP policy label.create.VPN.connection=Create VPN Connection label.VPN.customer.gateway=VPN Customer Gateway label.CIDR.list=CIDR list label.IKE.lifetime=IKE Lifetime (second) label.ESP.lifetime=ESP Lifetime(second) label.dead.peer.detection=Dead Peer Detection label.reset.VPN.connection=Reset VPN connection message.reset.VPN.connection=Please confirm that you want to reset VPN connection label.delete.VPN.connection=delete VPN connection message.delete.VPN.connection=Please confirm that you want to delete VPN connection label.add.new.tier=Add new tier label.add.VM.to.tier=Add VM to tier label.remove.tier=Remove tier label.local.storage.enabled=Local Storage Enabled label.associated.network=Associated Network label.add.port.forwarding.rule=Add port forwarding rule label.dns=DNS label.vpc=VPC label.vpc.id=VPC ID label.tier=Tier label.add.vpc=Add VPC label.super.cidr.for.guest.networks=Super CIDR for Guest Networks label.DNS.domain.for.guest.networks=DNS domain for Guest Networks label.configure.vpc=Configure VPC label.edit.vpc=Edit VPC label.restart.vpc=restart VPC message.restart.vpc=Please confirm that you want to restart the VPC label.remove.vpc=remove VPC message.remove.vpc=Please confirm that you want to remove the VPC label.vpn.customer.gateway=VPN Customer Gateway label.add.vpn.customer.gateway=Add VPN Customer Gateway label.IKE.encryption=IKE Encryption label.IKE.hash=IKE Hash label.IKE.DH=IKE DH label.ESP.encryption=ESP Encryption label.ESP.hash=ESP Hash label.perfect.forward.secrecy=Perfect Forward Secrecy label.IKE.lifetime=IKE lifetime (second) label.ESP.lifetime=ESP Lifetime (second) label.dead.peer.detection=Dead Peer Detection label.delete.VPN.customer.gateway=delete VPN Customer Gateway message.delete.VPN.customer.gateway=Please confirm that you want to delete this VPN Customer Gateway label.network.domain.text=Network domain label.memory.mb=Memory (in MB) label.cpu.mhz=CPU (in MHz) message.action.remove.host=Please confirm that you want to remove this host. message.action.reboot.router=All services provided by this virtual router will be interrupted. Please confirm that you want to reboot this router. message.action.stop.router=All services provided by this virtual router will be interrupted. Please confirm that you want to stop this router. message.restart.network=All services provided by this network will be interrupted. Please confirm that you want to restart this network. label.ipaddress=IP Address label.vcdcname=vCenter DC name label.vcipaddress=vCenter IP Address label.vsmctrlvlanid=Control VLAN ID label.vsmpktvlanid=Packet VLAN ID label.vsmstoragevlanid=Storage VLAN ID label.nexusVswitch=Nexus 1000v label.action.delete.nexusVswitch=Delete Nexus 1000v label.action.enable.nexusVswitch=Enable Nexus 1000v label.action.disable.nexusVswitch=Disable Nexus 1000v label.action.list.nexusVswitch=List Nexus 1000v message.action.delete.nexusVswitch=Please confirm that you want to delete this nexus 1000v message.action.enable.nexusVswitch=Please confirm that you want to enable this nexus 1000v message.action.disable.nexusVswitch=Please confirm that you want to disable this nexus 1000v message.specify.url=Please specify URL label.select.instance.to.attach.volume.to=Select instance to attach volume to label.upload=Upload label.upload.volume=Upload volume label.virtual.routers=Virtual Routers label.primary.storage.count=Primary Storage Pools label.secondary.storage.count=Secondary Storage Pools label.number.of.system.vms=Number of System VMs label.number.of.virtual.routers=Number of Virtual Routers label.action.register.iso=Register ISO label.isolation.method=Isolation method label.action.register.template=Register template label.checksum=MD5 checksum label.vpn=VPN label.vlan=VLAN label.management.ips=Management IP Addresses label.devices=Devices label.rules=Rules label.traffic.label=Traffic label label.vm.state=VM state message.setup.physical.network.during.zone.creation.basic=When adding a basic zone, you can set up one physical network, which corresponds to a NIC on the hypervisor. The network carries several types of traffic.

You may also drag and drop other traffic types onto the physical network. label.domain.router=Domain router label.console.proxy=Console proxy label.secondary.storage.vm=Secondary storage VM label.add.netScaler.device=Add Netscaler device label.add.F5.device=Add F5 device label.add.SRX.device=Add SRX device label.account.and.security.group=Account, Security group label.fetch.latest=Fetch latest label.system.offering=System Offering message.validate.instance.name=Instance name can not be longer than 63 characters. Only ASCII letters a~z, A~Z, digits 0~9, hyphen are allowed. Must start with a letter and end with a letter or a digit. label.isolated.networks=Isolated networks label.latest.events=Latest events state.Enabled=Enabled label.system.wide.capacity=System-wide capacity label.network.service.providers=Network Service Providers message.launch.zone=Zone is ready to launch; please proceed to the next step. error.unable.to.reach.management.server=Unable to reach Management Server label.internal.name=Internal name message.configure.all.traffic.types=You have multiple physical networks; please configure labels for each traffic type by clicking on the Edit button. message.edit.traffic.type=Please specify the traffic label you want associated with this traffic type. label.edit.traffic.type=Edit traffic type label.label=Label label.max.networks=Max. networks error.invalid.username.password=Invalid username or password message.enabling.security.group.provider=Enabling Security Group provider message.adding.Netscaler.provider=Adding Netscaler provider message.creating.guest.network=Creating guest network label.action.delete.physical.network=Delete physical network message.action.delete.physical.network=Please confirm that you want to delete this physical network message.installWizard.copy.whatIsAHost=A host is a single computer. Hosts provide the computing resources that run the guest virtual machines. Each host has hypervisor software installed on it to manage the guest VMs (except for bare metal hosts, which are a special case discussed in the Advanced Installation Guide). For example, a Linux KVM-enabled server, a Citrix XenServer server, and an ESXi server are hosts. In a Basic Installation, we use a single host running XenServer or KVM.

The host is the smallest organizational unit within a CloudStack™ deployment. Hosts are contained within clusters, clusters are contained within pods, and pods are contained within zones. label.add.compute.offering=Add compute offering label.compute.offering=Compute offering label.compute.offerings=Compute offerings label.select.offering=Select offering label.menu.infrastructure=Infrastructure label.sticky.tablesize=Table size label.sticky.expire=Expires label.sticky.cookie-name=Cookie name label.sticky.mode=Mode label.sticky.length=Length label.sticky.holdtime=Hold time label.sticky.request-learn=Request learn label.sticky.prefix=Prefix label.sticky.nocache=No cache label.sticky.indirect=Indirect label.sticky.postonly=Post only label.sticky.domain=Domain state.Allocating=Allocating state.Migrating=Migrating error.please.specify.physical.network.tags=Network offerings is not available until you specify tags for this physical network. state.Stopping=Stopping message.add.load.balancer.under.ip=The load balancer rule has been added under IP: message.select.instance=Please select an instance. label.select=Select label.select.vm.for.static.nat=Select VM for static NAT label.select.instance=Select instance label.nat.port.range=NAT Port Range label.static.nat.vm.details=Static NAT VM Details label.edit.lb.rule=Edit LB rule message.migrate.instance.to.host=Please confirm that you want to migrate instance to another host. label.migrate.instance.to.host=Migrate instance to another host message.migrate.instance.to.ps=Please confirm that you want to migrate instance to another primary storage. label.migrate.instance.to.ps=Migrate instance to another primary storage label.corrections.saved=Corrections saved message.installWizard.copy.whatIsSecondaryStorage=Secondary storage is associated with a zone, and it stores the following: message.installWizard.copy.whatIsPrimaryStorage=A CloudStack™ cloud infrastructure makes use of two types of storage: primary storage and secondary storage. Both of these can be iSCSI or NFS servers, or localdisk.

Primary storage is associated with a cluster, and it stores the disk volumes of each guest VM for all the VMs running on hosts in that cluster. The primary storage server is typically located close to the hosts. message.installWizard.copy.whatIsACluster=A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Virtual machine instances (VMs) can be live-migrated from one host to another within the same cluster, without interrupting service to the user. A cluster is the third-largest organizational unit within a CloudStack™ deployment. Clusters are contained within pods, and pods are contained within zones.

CloudStack™ allows multiple clusters in a cloud deployment, but for a Basic Installation, we only need one cluster. message.installWizard.copy.whatIsAPod=A pod often represents a single rack. Hosts in the same pod are in the same subnet.

A pod is the second-largest organizational unit within a CloudStack™ deployment. Pods are contained within zones. Each zone can contain one or more pods; in the Basic Installation, you will have just one pod in your zone. message.installWizard.copy.whatIsAZone=A zone is the largest organizational unit within a CloudStack™ deployment. A zone typically corresponds to a single datacenter, although it is permissible to have multiple zones in a datacenter. The benefit of organizing infrastructure into zones is to provide physical isolation and redundancy. For example, each zone can have its own power supply and network uplink, and the zones can be widely separated geographically (though this is not required). message.installWizard.copy.whatIsCloudStack=CloudStack™ is a software platform that pools computing resources to build public, private, and hybrid Infrastructure as a Service (IaaS) clouds. CloudStack™ manages the network, storage, and compute nodes that make up a cloud infrastructure. Use CloudStack™ to deploy, manage, and configure cloud computing environments.

Extending beyond individual virtual machine images running on commodity hardware, CloudStack™ provides a turnkey cloud infrastructure software stack for delivering virtual datacenters as a service - delivering all of the essential components to build, deploy, and manage multi-tier and multi-tenant cloud applications. Both open-source and Premium versions are available, with the open-source version offering nearly identical features. message.installWizard.tooltip.addSecondaryStorage.path=The exported path, located on the server you specified above message.installWizard.tooltip.addSecondaryStorage.nfsServer=The IP address of the NFS server hosting the secondary storage message.installWizard.tooltip.addPrimaryStorage.path=(for NFS) In NFS this is the exported path from the server. Path (for SharedMountPoint). With KVM this is the path on each host that is where this primary storage is mounted. For example, "/mnt/primary". message.installWizard.tooltip.addPrimaryStorage.server=(for NFS, iSCSI, or PreSetup) The IP address or DNS name of the storage device. message.installWizard.tooltip.addPrimaryStorage.name=The name for the storage device. message.installWizard.tooltip.addHost.password=This is the password for the user named above (from your XenServer install). message.installWizard.tooltip.addHost.username=Usually root. message.installWizard.tooltip.addHost.hostname=The DNS name or IP address of the host. message.installWizard.tooltip.addCluster.name=A name for the cluster. This can be text of your choosing and is not used by CloudStack. message.installWizard.tooltip.addPod.reservedSystemEndIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers. message.installWizard.tooltip.addPod.reservedSystemStartIp=This is the IP range in the private network that the CloudStack uses to manage Secondary Storage VMs and Console Proxy VMs. These IP addresses are taken from the same subnet as computing servers. message.installWizard.tooltip.addPod.reservedSystemNetmask=The netmask in use on the subnet the guests will use. message.installWizard.tooltip.addPod.reservedSystemGateway=The gateway for the hosts in that pod. message.installWizard.tooltip.addPod.name=A name for the pod message.installWizard.tooltip.configureGuestTraffic.guestEndIp=The range of IP addresses that will be available for allocation to guests in this zone. If one NIC is used, these IPs should be in the same CIDR as the pod CIDR. message.installWizard.tooltip.configureGuestTraffic.guestStartIp=The range of IP addresses that will be available for allocation to guests in this zone. If one NIC is used, these IPs should be in the same CIDR as the pod CIDR. message.installWizard.tooltip.configureGuestTraffic.guestNetmask=The netmask in use on the subnet that the guests should use message.installWizard.tooltip.configureGuestTraffic.guestGateway=The gateway that the guests should use message.installWizard.tooltip.configureGuestTraffic.description=A description for your network message.installWizard.tooltip.configureGuestTraffic.name=A name for your network message.installWizard.tooltip.addZone.internaldns2=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here. message.installWizard.tooltip.addZone.internaldns1=These are DNS servers for use by system VMs in the zone. These DNS servers will be accessed via the private network interface of the System VMs. The private IP address you provide for the pods must have a route to the DNS server named here. message.installWizard.tooltip.addZone.dns2=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here. message.installWizard.tooltip.addZone.name=A name for the zone message.installWizard.tooltip.addZone.dns1=These are DNS servers for use by guest VMs in the zone. These DNS servers will be accessed via the public network you will add later. The public IP addresses for the zone must have a route to the DNS server named here. message.setup.successful=Cloud setup successful! label.may.continue=You may now continue. error.installWizard.message=Something went wrong; you may go back and correct any errors message.installWizard.now.building=Now building your cloud... message.installWizard.click.retry=Click the button to retry launch. label.launch=Launch label.installWizard.click.launch=Click the launch button. label.congratulations=Congratulations! label.installWizard.addSecondaryStorageIntro.subtitle=What is secondary storage? label.installWizard.addSecondaryStorageIntro.title=Let’s add secondary storage label.installWizard.addPrimaryStorageIntro.subtitle=What is primary storage? label.installWizard.addPrimaryStorageIntro.title=Let’s add primary storage label.installWizard.addHostIntro.subtitle=What is a host? label.installWizard.addHostIntro.title=Let’s add a host label.installWizard.addClusterIntro.subtitle=What is a cluster? label.installWizard.addClusterIntro.title=Let’s add a cluster label.installWizard.addPodIntro.subtitle=What is a pod? label.installWizard.addPodIntro.title=Let’s add a pod label.installWizard.addZone.title=Add zone label.installWizard.addZoneIntro.subtitle=What is a zone? label.installWizard.addZoneIntro.title=Let’s add a zone error.password.not.match=The password fields do not match label.confirm.password=Confirm password message.change.password=Please change your password. label.save.and.continue=Save and continue label.skip.guide=I have used CloudStack before, skip this guide label.continue.basic.install=Continue with basic installation label.introduction.to.cloudstack=Introduction to CloudStack™ label.what.is.cloudstack=What is CloudStack™? label.hints=Hints label.installWizard.subtitle=This tour will aid you in setting up your CloudStack™ installation label.continue=Continue label.installWizard.title=Hello and Welcome to CloudStack™ label.agree=Agree label.license.agreement=License Agreement label.license.agreement.subtitle=Please accept the CloudStack™ EULA before installing. label.manage.resources=Manage Resources label.port.forwarding.policies=Port forwarding policies label.load.balancing.policies=Load balancing policies label.networking.and.security=Networking and security label.bandwidth=Bandwidth label.virtual.machines=Virtual machines label.compute.and.storage=Compute and Storage label.task.completed=Task completed label.update.project.resources=Update project resources label.remove.project.account=Remove project account label.item.listing=Item listing message.select.item=Please select an item. label.removing=Removing label.invite=Invite label.add.by=Add by label.max.vms=Max. user VMs label.max.public.ips=Max. public IPs label.max.volumes=Max. volumes label.max.snapshots=Max. snapshots label.max.templates=Max. templates label.max.vpcs=Max. VPCs label.project.dashboard=Project dashboard label.remind.later=Remind me later label.invited.accounts=Invited accounts label.invite.to=Invite to label.add.accounts.to=Add accounts to label.add.accounts=Add accounts label.project.name=Project name label.create.project=Create project label.networks=Networks label.launch.vm=Launch VM label.new.vm=New VM label.previous=Previous label.add.to.group=Add to group message.vm.review.launch=Please review the following information and confirm that your virtual instance is correct before launch. message.select.security.groups=Please select security group(s) for your new VM label.new=New message.please.select.networks=Please select networks for your virtual machine. message.please.proceed=Please proceed to the next step. message.zone.no.network.selection=The zone you selected does not have any choices for network selection. label.no.thanks=No thanks label.my.templates=My templates message.select.template=Please select a template for your new virtual instance. message.select.iso=Please select an ISO for your new virtual instance. message.template.desc=OS image that can be used to boot VMs message.iso.desc=Disc image containing data or bootable media for OS label.select.iso.or.template=Select ISO or template message.select.a.zone=A zone typically corresponds to a single datacenter. Multiple zones help make the cloud more reliable by providing physical isolation and redundancy. label.select.a.zone=Select a zone label.review=Review label.select.a.template=Select a template label.setup=Setup state.Allocated=Allocated changed.item.properties=Changed item properties label.apply=Apply label.default=Default label.viewing=Viewing label.move.to.top=Move to top label.move.up.row=Move up one row label.move.down.row=Move down one row label.move.to.bottom=Move to bottom label.drag.new.position=Drag to new position label.order=Order label.no.data=No data to show label.change.value=Change value label.clear.list=Clear list label.full.path=Full path message.add.domain=Please specify the subdomain you want to create under this domain message.delete.user=Please confirm that you would like to delete this user. message.enable.user=Please confirm that you would like to enable this user. message.disable.user=Please confirm that you would like to disable this user. message.generate.keys=Please confirm that you would like to generate new keys for this user. message.update.resource.count=Please confirm that you want to update resource counts for this account. message.edit.account=Edit ("-1" indicates no limit to the amount of resources create) label.total.of.vm=Total of VM label.total.of.ip=Total of IP Address state.enabled=Enabled message.action.download.iso=Please confirm that you want to download this ISO. message.action.download.template=Please confirm that you want to download this template. label.destination.zone=Destination Zone label.keyboard.type=Keyboard type label.nic.adapter.type=NIC adapter type label.root.disk.controller=Root disk controller label.community=Community label.remove.egress.rule=Remove egress rule label.add.egress.rule=Add egress rule label.egress.rule=Egress rule label.remove.ingress.rule=Remove ingress rule label.delete.vpn.user=Delete VPN user label.add.vpn.user=Add VPN user label.remove.pf=Remove port forwarding rule label.remove.vm.from.lb=Remove VM from load balancer rule label.add.vms.to.lb=Add VM(s) to load balancer rule label.add.vm=Add VM label.remove.static.nat.rule=Remove static NAT rule label.remove.rule=Remove rule label.add.static.nat.rule=Add static NAT rule label.add.rule=Add rule label.configuration=Configuration message.disable.vpn=Are you sure you want to disable VPN? label.disable.vpn=Disable VPN message.enable.vpn=Please confirm that you want VPN access enabled for this IP address. label.enable.vpn=Enable VPN message.acquire.new.ip=Please confirm that you would like to acquire a new IP for this network. label.elastic=Elastic label.my.network=My network label.add.vms=Add VMs label.configure=Configure label.stickiness=Stickiness label.source=Source label.least.connections=Least connections label.round.robin=Round-robin label.restart.required=Restart required label.clean.up=Clean up label.restart.network=Restart network label.edit.network.details=Edit network details label.add.guest.network=Add guest network label.guest.networks=Guest networks message.ip.address.changed=Your IP addresses may have changed; would you like to refresh the listing? Note that in this case the details pane will close. state.BackingUp=Backing Up state.BackedUp=Backed Up label.done=Done label.vm.name=VM name message.migrate.volume=Please confirm that you want to migrate volume to another primary storage. label.migrate.volume=Migrate volume to another primary storage message.create.template=Are you sure you want to create template? label.create.template=Create template message.download.volume.confirm=Please confirm that you want to download this volume message.detach.disk=Are you sure you want to detach this disk? state.ready=Ready state.Ready=Ready label.vm.display.name=VM display name label.select-view=Select view label.local.storage=Local Storage label.direct.ips=Shared Network IPs label.view.all=View all label.zone.details=Zone details message.alert.state.detected=Alert state detected state.Starting=Starting state.Expunging=Expunging state.Creating=Creating message.decline.invitation=Are you sure you want to decline this project invitation? label.decline.invitation=Decline invitation message.confirm.join.project=Please confirm you wish to join this project. message.join.project=You have now joined a project. Please switch to Project view to see the project. label.accept.project.invitation=Accept project invitation label.token=Token label.project.id=Project ID message.enter.token=Please enter the token that you were given in your invite e-mail. label.enter.token=Enter token state.Accepted=Accepted state.Pending=Pending state.Completed=Completed state.Declined=Declined label.project=Project label.invitations=Invitations label.delete.project=Delete project message.delete.project=Are you sure you want to delete this project? message.activate.project=Are you sure you want to activate this project? label.activate.project=Activate Project label.suspend.project=Suspend Project message.suspend.project=Are you sure you want to suspend this project? state.Suspended=Suspended label.edit.project.details=Edit project details label.new.project=New Project state.Active=Active state.Disabled=Disabled label.projects=Projects label.make.project.owner=Make account project owner label.remove.project.account=Remove account from project message.project.invite.sent=Invite sent to user; they will be added to the project once they accept the invitation label.add.account.to.project=Add account to project label.revoke.project.invite=Revoke invitation label.project.invite=Invite to project label.select.project=Select Project message.no.projects=You do not have any projects.
Please create a new one from the projects section. message.no.projects.adminOnly=You do not have any projects.
Please ask your administrator to create a new project. message.pending.projects.1=You have pending project invitations: message.pending.projects.2=To view, please go to the projects section, then select invitations from the drop-down. message.instanceWizard.noTemplates=You do not have any templates available; please add a compatible template, and re-launch the instance wizard. label.view=View instances.actions.reboot.label=Reboot instance label.filterBy=Filter by label.ok=OK notification.reboot.instance=Reboot instance notification.start.instance=Start instance notification.stop.instance=Stop instance label.display.name=Display name label.zone.name=Zone name ui.listView.filters.all=All ui.listView.filters.mine=Mine state.Running=Running state.Stopped=Stopped state.Destroyed=Destroyed state.Error=Error message.reset.password.warning.notPasswordEnabled=The template of this instance was created without password enabled message.reset.password.warning.notStopped=Your instance must be stopped before attempting to change its current password label.notifications=Notifications label.default.view=Default View label.project.view=Project View message.add.system.service.offering=Please fill in the following data to add a new system service offering. message.action.delete.system.service.offering=Please confirm that you want to delete this system service offering. label.action.delete.system.service.offering=Delete System Service Offering label.hypervisor.capabilities=Hypervisor capabilities label.hypervisor.version=Hypervisor version label.max.guest.limit=Max guest limit label.add.network.offering=Add network offering label.supported.services=Supported Services label.service.capabilities=Service Capabilities label.guest.type=Guest Type label.specify.IP.ranges=Specify IP ranges label.conserve.mode=Conserve mode label.created.by.system=Created by system label.menu.system.service.offerings=System Offerings label.add.system.service.offering=Add System Service Offering label.redundant.router.capability=Redundant router capability label.supported.source.NAT.type=Supported Source NAT type label.elastic.LB=Elastic LB label.LB.isolation=LB isolation label.elastic.IP=Elastic IP label.network.label.display.for.blank.value=Use default gateway label.xen.traffic.label=XenServer traffic label label.kvm.traffic.label=KVM traffic label label.vmware.traffic.label=VMware traffic label label.start.IP=Start IP label.end.IP=End IP label.remove.ip.range=Remove IP range label.ip.ranges=IP Ranges label.start.vlan=Start Vlan label.end.vlan=End Vlan label.broadcast.domain.range=Broadcast domain range label.compute=Compute message.add.guest.network=Please confirm that you would like to add a guest network label.subdomain.access=Subdomain Access label.guest.start.ip=Guest start IP label.guest.end.ip=Guest end IP label.virtual.router=Virtual Router label.physical.network.ID=Physical network ID label.destination.physical.network.id=Destination physical network ID label.dhcp=DHCP label.destroy.router=Destroy router message.confirm.destroy.router=Please confirm that you would like to destroy this router label.change.service.offering=Change service offering label.view.console=View console label.redundant.state=Redundant state label.enable.provider=Enable provider message.confirm.enable.provider=Please confirm that you would like to enable this provider label.disable.provider=Disable provider message.confirm.disable.provider=Please confirm that you would like to disable this provider label.shutdown.provider=Shutdown provider message.confirm.shutdown.provider=Please confirm that you would like to shutdown this provider label.netScaler=NetScaler label.add.new.NetScaler=Add new NetScaler label.capacity=Capacity label.dedicated=Dedicated label.f5=F5 label.add.new.F5=Add new F5 label.srx=SRX label.providers=Providers label.add.new.SRX=Add new SRX label.timeout=Timeout label.public.network=Public network label.private.network=Private network label.enable.swift=Enable Swift confirm.enable.swift=Please fill in the following information to enable support for Swift message.after.enable.swift=Swift configured. Note: When you leave this page, you will not be able to re-configure Swift again. label.key=Key label.delete.NetScaler=Delete NetScaler message.confirm.delete.NetScaler=Please confirm that you would like to delete NetScaler label.delete.F5=Delete F5 message.confirm.delete.F5=Please confirm that you would like to delete F5 label.delete.SRX=Delete SRX message.confirm.delete.SRX=Please confirm that you would like to delete SRX label.pods=Pods label.pod.name=Pod name label.reserved.system.gateway=Reserved system gateway label.reserved.system.netmask=Reserved system netmask label.start.reserved.system.IP=Start Reserved system IP label.end.reserved.system.IP=End Reserved system IP label.clusters=Clusters label.cluster.name=Cluster Name label.host.MAC=Host MAC label.agent.username=Agent Username label.agent.password=Agent Password message.confirm.action.force.reconnect=Please confirm that you want to force reconnect this host. label.resource.state=Resource state label.LUN.number=LUN # message.confirm.remove.IP.range=Please confirm that you would like to remove this IP range. message.tooltip.zone.name=A name for the zone. message.tooltip.dns.1=Name of a DNS server for use by VMs in the zone. The public IP addresses for the zone must have a route to this server. message.tooltip.dns.2=A second DNS server name for use by VMs in the zone. The public IP addresses for the zone must have a route to this server. message.tooltip.internal.dns.1=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server. message.tooltip.internal.dns.2=Name of a DNS server for use by CloudStack internal system VMs in the zone. The private IP address for the pods must have a route to this server. message.tooltip.network.domain=A DNS suffix that will create a custom domain name for the network that is accessed by guest VMs. message.tooltip.pod.name=A name for this pod. message.tooltip.reserved.system.gateway=The gateway for the hosts in the pod. message.tooltip.reserved.system.netmask=The network prefix that defines the pod subnet. Uses CIDR notation. message.creating.zone=Creating zone message.creating.physical.networks=Creating physical networks message.configuring.physical.networks=Configuring physical networks message.adding.Netscaler.device=Adding Netscaler device message.creating.pod=Creating pod message.configuring.public.traffic=Configuring public traffic message.configuring.storage.traffic=Configuring storage traffic message.configuring.guest.traffic=Configuring guest traffic message.creating.cluster=Creating cluster message.adding.host=Adding host message.creating.primary.storage=Creating primary storage message.creating.secondary.storage=Creating secondary storage message.Zone.creation.complete=Zone creation complete message.enabling.zone=Enabling zone error.something.went.wrong.please.correct.the.following=Something went wrong; please correct the following error.could.not.enable.zone=Could not enable zone message.zone.creation.complete.would.you.like.to.enable.this.zone=Zone creation complete. Would you like to enable this zone? message.please.add.at.lease.one.traffic.range=Please add at least one traffic range. message.you.must.have.at.least.one.physical.network=You must have at least one physical network message.please.select.a.different.public.and.management.network.before.removing=Please select a different public and management network before removing label.zone.type=Zone Type label.setup.zone=Setup Zone label.setup.network=Setup Network label.add.resources=Add Resources label.launch=Launch label.set.up.zone.type=Set up zone type message.please.select.a.configuration.for.your.zone=Please select a configuration for your zone. message.desc.basic.zone=Provide a single network where each VM instance is assigned an IP directly from the network. Guest isolation can be provided through layer-3 means such as security groups (IP address source filtering). label.basic=Basic message.desc.advanced.zone=For more sophisticated network topologies. This network model provides the most flexibility in defining guest networks and providing custom network offerings such as firewall, VPN, or load balancer support. label.advanced=Advanced message.desc.zone=A zone is the largest organizational unit in CloudStack, and it typically corresponds to a single datacenter. Zones provide physical isolation and redundancy. A zone consists of one or more pods (each of which contains hosts and primary storage servers) and a secondary storage server which is shared by all pods in the zone. label.physical.network=Physical Network label.public.traffic=Public traffic label.guest.traffic=Guest Traffic label.storage.traffic=Storage Traffic message.setup.physical.network.during.zone.creation=When adding an advanced zone, you need to set up one or more physical networks. Each network corresponds to a NIC on the hypervisor. Each physical network can carry one or more types of traffic, with certain restrictions on how they may be combined.

Drag and drop one or more traffic types onto each physical network. label.add.physical.network=Add physical network label.traffic.types=Traffic Types label.management=Management label.guest=Guest label.please.specify.netscaler.info=Please specify Netscaler info message.public.traffic.in.advanced.zone=Public traffic is generated when VMs in the cloud access the internet. Publicly-accessible IPs must be allocated for this purpose. End users can use the CloudStack UI to acquire these IPs to implement NAT between their guest network and their public network.

Provide at least one range of IP addresses for internet traffic. message.public.traffic.in.basic.zone=Public traffic is generated when VMs in the cloud access the Internet or provide services to clients over the Internet. Publicly accessible IPs must be allocated for this purpose. When a instance is created, an IP from this set of Public IPs will be allocated to the instance in addition to the guest IP address. Static 1-1 NAT will be set up automatically between the public IP and the guest IP. End users can also use the CloudStack UI to acquire additional IPs to implement static NAT between their instances and the public IP. message.add.pod.during.zone.creation=Each zone must contain in one or more pods, and we will add the first pod now. A pod contains hosts and primary storage servers, which you will add in a later step. First, configure a range of reserved IP addresses for CloudStack's internal management traffic. The reserved IP range must be unique for each zone in the cloud. message.guest.traffic.in.advanced.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of VLAN IDs to carry guest traffic for each physical network. message.guest.traffic.in.basic.zone=Guest network traffic is communication between end-user virtual machines. Specify a range of IP addresses that CloudStack can assign to guest VMs. Make sure this range does not overlap the reserved system IP range. message.storage.traffic=Traffic between CloudStack's internal resources, including any components that communicate with the Management Server, such as hosts and CloudStack system VMs. Please configure storage traffic here. message.desc.cluster=Each pod must contain one or more clusters, and we will add the first cluster now. A cluster provides a way to group hosts. The hosts in a cluster all have identical hardware, run the same hypervisor, are on the same subnet, and access the same shared storage. Each cluster consists of one or more hosts and one or more primary storage servers. message.desc.host=Each cluster must contain at least one host (computer) for guest VMs to run on, and we will add the first host now. For a host to function in CloudStack, you must install hypervisor software on the host, assign an IP address to the host, and ensure the host is connected to the CloudStack management server.

Give the host's DNS or IP address, the user name (usually root) and password, and any labels you use to categorize hosts. message.desc.primary.storage=Each cluster must contain one or more primary storage servers, and we will add the first one now. Primary storage contains the disk volumes for all the VMs running on hosts in the cluster. Use any standards-compliant protocol that is supported by the underlying hypervisor. message.desc.secondary.storage=Each zone must have at least one NFS or secondary storage server, and we will add the first one now. Secondary storage stores VM templates, ISO images, and VM disk volume snapshots. This server must be available to all hosts in the zone.

Provide the IP address and exported path. label.launch.zone=Launch zone message.please.wait.while.zone.is.being.created=Please wait while your zone is being created; this may take a while... label.load.balancing=Load Balancing label.static.nat.enabled=Static NAT Enabled label.zones=Zones label.view.more=View more label.number.of.zones=Number of Zones label.number.of.pods=Number of Pods label.number.of.clusters=Number of Clusters label.number.of.hosts=Number of Hosts label.total.hosts=Total Hosts label.total.CPU=Total CPU label.total.memory=Total Memory label.total.storage=Total Storage label.purpose=Purpose label.action.migrate.router=Migrate Router label.action.migrate.router.processing=Migrating Router.... message.migrate.router.confirm=Please confirm the host you wish to migrate the router to: label.migrate.router.to=Migrate Router to label.action.migrate.systemvm=Migrate System VM label.action.migrate.systemvm.processing=Migrating System VM.... message.migrate.systemvm.confirm=Please confirm the host you wish to migrate the system VM to: label.migrate.systemvm.to=Migrate System VM to mode=Mode side.by.side=Side by Side inline=Inline extractable=Extractable label.ocfs2=OCFS2 label.action.edit.host=Edit Host network.rate=Network Rate ICMP.type=ICMP Type ICMP.code=ICMP Code image.directory=Image Directory label.action.create.template.from.vm=Create Template from VM label.action.create.template.from.volume=Create Template from Volume message.vm.create.template.confirm=Create Template will reboot the VM automatically. label.action.manage.cluster=Manage Cluster message.action.manage.cluster=Please confirm that you want to manage the cluster. label.action.manage.cluster.processing=Managing Cluster.... label.action.unmanage.cluster=Unmanage Cluster message.action.unmanage.cluster=Please confirm that you want to unmanage the cluster. label.action.unmanage.cluster.processing=Unmanaging Cluster.... label.allocation.state=Allocation State managed.state=Managed State label.default.use=Default Use label.host.tags=Host Tags label.cidr=CIDR label.cidr.list=Source CIDR label.storage.tags=Storage Tags label.redundant.router=Redundant Router label.is.redundant.router=Redundant force.delete=Force Delete force.delete.domain.warning=Warning: Choosing this option will cause the deletion of all child domains and all associated accounts and their resources. force.remove=Force Remove force.remove.host.warning=Warning: Choosing this option will cause CloudStack to forcefully stop all running virtual machines before removing this host from the cluster. force.stop=Force Stop force.stop.instance.warning=Warning: Forcing a stop on this instance should be your last option. It can lead to data loss as well as inconsistent behavior of the virtual machine state. label.PreSetup=PreSetup label.SR.name = SR Name-Label label.SharedMountPoint=SharedMountPoint label.clvm=CLVM label.volgroup=Volume Group label.VMFS.datastore=VMFS datastore label.network.device=Network Device label.add.network.device=Add Network Device label.network.device.type=Network Device Type label.DHCP.server.type=DHCP Server Type label.Pxe.server.type=Pxe Server Type label.PING.storage.IP=PING storage IP label.PING.dir=PING Directory label.TFTP.dir=TFTP Directory label.PING.CIFS.username=PING CIFS username label.PING.CIFS.password=PING CIFS password label.CPU.cap=CPU Cap label.action.enable.zone=Enable Zone label.action.enable.zone.processing=Enabling Zone.... message.action.enable.zone=Please confirm that you want to enable this zone. label.action.disable.zone=Disable Zone label.action.disable.zone.processing=Disabling Zone.... message.action.disable.zone=Please confirm that you want to disable this zone. label.action.enable.pod=Enable Pod label.action.enable.pod.processing=Enabling Pod.... message.action.enable.pod=Please confirm that you want to enable this pod. label.action.disable.pod=Disable Pod label.action.disable.pod.processing=Disabling Pod.... message.action.disable.pod=Please confirm that you want to disable this pod. label.action.enable.cluster=Enable Cluster label.action.enable.cluster.processing=Enabling Cluster.... message.action.enable.cluster=Please confirm that you want to enable this cluster. label.action.disable.cluster=Disable Cluster label.action.disable.cluster.processing=Disabling Cluster.... message.action.disable.cluster=Please confirm that you want to disable this cluster. label.account.id=Account ID label.account.name=Account Name label.account.specific=Account-Specific label.account=Account label.accounts=Accounts label.acquire.new.ip=Acquire New IP label.show.ingress.rule=Show Ingress Rule label.hide.ingress.rule=Hide Ingress Rule label.action.attach.disk.processing=Attaching Disk.... label.action.attach.disk=Attach Disk label.action.attach.iso.processing=Attaching ISO.... label.action.attach.iso=Attach ISO label.action.cancel.maintenance.mode.processing=Cancelling Maintenance Mode.... label.action.cancel.maintenance.mode=Cancel Maintenance Mode label.action.change.password=Change Password label.action.change.service.processing=Changing Service.... label.action.change.service=Change Service label.action.copy.ISO.processing=Coping ISO.... label.action.copy.ISO=Copy ISO label.action.copy.template.processing=Coping Template.... label.action.copy.template=Copy Template label.action.create.template.processing=Creating Template.... label.action.create.template=Create Template label.action.create.vm.processing=Creating VM.... label.action.create.vm=Create VM label.action.create.volume.processing=Creating Volume.... label.action.create.volume=Create Volume label.action.delete.IP.range.processing=Deleting IP Range.... label.action.delete.IP.range=Delete IP Range label.action.delete.ISO.processing=Deleting ISO.... label.action.delete.ISO=Delete ISO label.action.delete.account.processing=Deleting account.... label.action.delete.account=Delete account label.action.delete.cluster.processing=Deleting Cluster.... label.action.delete.cluster=Delete Cluster label.action.delete.disk.offering.processing=Deleting Disk Offering.... label.action.delete.disk.offering=Delete Disk Offering label.action.update.resource.count=Update Resource Count label.action.update.resource.count.processing=Updating Resource Count.... label.action.delete.domain=Delete Domain label.action.delete.domain.processing=Deleting Domain.... label.action.delete.firewall.processing=Deleting Firewall.... label.action.delete.firewall=Delete firewall rule label.action.delete.ingress.rule.processing=Deleting Ingress Rule.... label.action.delete.ingress.rule=Delete Ingress Rule label.action.delete.load.balancer.processing=Deleting Load Balancer.... label.action.delete.load.balancer=Delete load balancer rule label.action.edit.network.processing=Editing Network.... label.action.edit.network=Edit Network label.action.delete.network.processing=Deleting Network.... label.action.delete.network=Delete Network label.action.delete.pod.processing=Deleting Pod.... label.action.delete.pod=Delete Pod label.action.delete.primary.storage.processing=Deleting Primary Storage.... label.action.delete.primary.storage=Delete Primary Storage label.action.delete.secondary.storage.processing=Deleting Secondary Storage.... label.action.delete.secondary.storage=Delete Secondary Storage label.action.delete.security.group.processing=Deleting Security Group.... label.action.delete.security.group=Delete Security Group label.action.delete.service.offering.processing=Deleting Service Offering.... label.action.delete.service.offering=Delete Service Offering label.action.delete.snapshot.processing=Deleting Snapshot.... label.action.delete.snapshot=Delete Snapshot label.action.delete.template.processing=Deleting Template.... label.action.delete.template=Delete Template label.action.delete.user.processing=Deleting User.... label.action.delete.user=Delete User label.action.delete.volume.processing=Deleting Volume.... label.action.delete.volume=Delete Volume label.action.delete.zone.processing=Deleting Zone.... label.action.delete.zone=Delete Zone label.action.destroy.instance.processing=Destroying Instance.... label.action.destroy.instance=Destroy Instance label.action.destroy.systemvm.processing=Destroying System VM.... label.action.destroy.systemvm=Destroy System VM label.action.detach.disk.processing=Detaching Disk.... label.action.detach.disk=Detach Disk label.action.detach.iso.processing=Detaching ISO.... label.action.detach.iso=Detach ISO label.action.disable.account.processing=Disabling account.... label.action.disable.account=Disable account label.action.disable.static.NAT.processing=Disabling Static NAT.... label.action.disable.static.NAT=Disable Static NAT label.action.disable.user.processing=Disabling User.... label.action.disable.user=Disable User label.action.download.ISO=Download ISO label.action.download.template=Download Template label.action.download.volume.processing=Downloading Volume.... label.action.download.volume=Download Volume label.action.edit.ISO=Edit ISO label.action.edit.account=Edit account label.action.edit.disk.offering=Edit Disk Offering label.action.edit.domain=Edit Domain label.action.edit.global.setting=Edit Global Setting label.action.edit.instance=Edit Instance label.action.edit.network.offering=Edit Network Offering label.action.edit.pod=Edit Pod label.action.edit.primary.storage=Edit Primary Storage label.action.edit.resource.limits=Edit Resource Limits label.action.edit.service.offering=Edit Service Offering label.action.edit.template=Edit Template label.action.edit.user=Edit User label.action.edit.zone=Edit Zone label.action.enable.account.processing=Enabling account.... label.action.enable.account=Enable account label.action.enable.maintenance.mode.processing=Enabling Maintenance Mode.... label.action.enable.maintenance.mode=Enable Maintenance Mode label.action.enable.static.NAT.processing=Enabling Static NAT.... label.action.enable.static.NAT=Enable Static NAT label.action.enable.user.processing=Enabling User.... label.action.enable.user=Enable User label.action.force.reconnect.processing=Reconnecting.... label.action.force.reconnect=Force Reconnect label.action.generate.keys.processing=Generate Keys.... label.action.generate.keys=Generate Keys label.action.lock.account.processing=Locking account.... label.action.lock.account=Lock account label.action.migrate.instance=Migrate Instance label.action.migrate.instance.processing=Migrating Instance.... label.action.reboot.instance.processing=Rebooting Instance.... label.action.reboot.instance=Reboot Instance label.action.reboot.router.processing=Rebooting Router.... label.action.reboot.router=Reboot Router label.action.reboot.systemvm.processing=Rebooting System VM.... label.action.reboot.systemvm=Reboot System VM label.action.recurring.snapshot=Recurring Snapshots label.action.release.ip.processing=Releasing IP.... label.action.release.ip=Release IP label.action.remove.host.processing=Removing Host.... label.action.remove.host=Remove Host label.action.reset.password.processing=Resetting Password.... label.action.reset.password=Reset Password label.action.resource.limits=Resource limits label.action.restore.instance.processing=Restoring Instance.... label.action.restore.instance=Restore Instance label.action.start.instance.processing=Starting Instance.... label.action.start.instance=Start Instance label.action.start.router.processing=Starting Router.... label.action.start.router=Start Router label.action.start.systemvm.processing=Starting System VM.... label.action.start.systemvm=Start System VM label.action.stop.instance.processing=Stopping Instance.... label.action.stop.instance=Stop Instance label.action.stop.router.processing=Stopping Router.... label.action.stop.router=Stop Router label.action.stop.systemvm.processing=Stopping System VM.... label.action.stop.systemvm=Stop System VM label.action.take.snapshot.processing=Taking Snapshot.... label.action.take.snapshot=Take Snapshot label.action.update.OS.preference.processing=Updating OS Preference.... label.action.update.OS.preference=Update OS Preference label.actions=Actions label.active.sessions=Active Sessions label.add.account=Add Account label.add.by.cidr=Add By CIDR label.add.by.group=Add By Group label.add.cluster=Add Cluster label.add.direct.iprange=Add Direct Ip Range label.add.disk.offering=Add Disk Offering label.add.domain=Add Domain label.add.firewall=Add firewall rule label.add.host=Add Host label.add.ingress.rule=Add Ingress Rule label.add.ip.range=Add IP Range label.add.load.balancer=Add Load Balancer label.add.more=Add More label.add.network=Add Network label.add.pod=Add Pod label.add.primary.storage=Add Primary Storage label.add.secondary.storage=Add Secondary Storage label.add.security.group=Add Security Group label.add.service.offering=Add Service Offering label.add.template=Add Template label.add.user=Add User label.add.vlan=Add VLAN label.add.volume=Add Volume label.add.zone=Add Zone label.add=Add label.adding.cluster=Adding Cluster label.adding.failed=Adding Failed label.adding.pod=Adding Pod label.adding.processing=Adding.... label.adding.succeeded=Adding Succeeded label.adding.user=Adding User label.adding.zone=Adding Zone label.adding=Adding label.additional.networks=Additional Networks label.admin.accounts=Admin Accounts label.admin=Admin label.advanced.mode=Advanced Mode label.advanced.search=Advance Search label.advanced=Advanced label.alert=Alert label.algorithm=Algorithm label.allocated=Allocated label.api.key=API Key label.assign.to.load.balancer=Assigning instance to load balancer label.assign=Assign label.associated.network.id=Associated Network ID label.attached.iso=Attached ISO label.availability.zone=Availability Zone label.availability=Availability label.available.public.ips=Available Public IP Addresses label.available=Available label.back=Back label.basic.mode=Basic Mode label.bootable=Bootable label.broadcast.domain.type=Broadcast Domain Type label.by.account=By Account label.by.availability=By Availability label.by.domain=By Domain label.by.end.date=By End Date label.by.level=By Level label.by.pod=By Pod label.by.role=By Role label.by.start.date=By Start Date label.by.state=By State label.by.traffic.type=By Traffic Type label.by.type.id=By Type ID label.by.type=By Type label.by.zone=By Zone label.bytes.received=Bytes Received label.bytes.sent=Bytes Sent label.cancel=Cancel label.certificate=Certificate label.privatekey=PKCS#8 Private Key label.domain.suffix=DNS Domain Suffix (i.e., xyz.com) label.character=Character label.cidr.account=CIDR or Account/Security Group label.close=Close label.cloud.console=Cloud Management Console label.cloud.managed=Cloud.com Managed label.cluster.type=Cluster Type label.cluster=Cluster label.code=Code label.confirmation=Confirmation label.cpu.allocated.for.VMs=CPU Allocated for VMs label.cpu.allocated=CPU Allocated label.cpu.utilized=CPU Utilized label.cpu=CPU label.created=Created label.cross.zones=Cross Zones label.custom.disk.size=Custom Disk Size label.daily=Daily label.data.disk.offering=Data Disk Offering label.date=Date label.day.of.month=Day of Month label.day.of.week=Day of Week label.delete=Delete label.deleting.failed=Deleting Failed label.deleting.processing=Deleting.... label.description=Description label.detaching.disk=Detaching Disk label.details=Details label.device.id=Device ID label.disabled=Disabled label.disabling.vpn.access=Disabling VPN Access label.disk.allocated=Disk Allocated label.disk.offering=Disk Offering label.disk.size.gb=Disk Size (in GB) label.disk.size=Disk Size label.disk.total=Disk Total label.disk.volume=Disk Volume label.display.text=Display Text label.dns.1=DNS 1 label.dns.2=DNS 2 label.domain.admin=Domain Admin label.domain.id=Domain ID label.domain.name=Domain Name label.domain=Domain label.double.quotes.are.not.allowed=Double quotes are not allowed label.download.progress=Download Progress label.edit=Edit label.email=Email label.enabling.vpn.access=Enabling VPN Access label.enabling.vpn=Enabling VPN label.end.port=End Port label.endpoint.or.operation=Endpoint or Operation label.error.code=Error Code label.error=Error label.esx.host=ESX/ESXi Host label.example=Example label.failed=Failed label.featured=Featured label.firewall=Firewall label.first.name=First Name label.format=Format label.friday=Friday label.full=Full label.gateway=Gateway label.general.alerts=General Alerts label.generating.url=Generating URL label.go.step.2=Go to Step 2 label.go.step.3=Go to Step 3 label.go.step.4=Go to Step 4 label.go.step.5=Go to Step 5 label.group.optional=Group (Optional) label.group=Group label.guest.cidr=Guest CIDR label.guest.gateway=Guest Gateway label.guest.ip.range=Guest IP Range label.guest.ip=Guest IP Address label.guest.netmask=Guest Netmask label.ha.enabled=HA Enabled label.help=Help label.host.alerts=Host Alerts label.host.name=Host Name label.host=Host label.hosts=Hosts label.hourly=Hourly label.hypervisor.type=Hypervisor Type label.hypervisor=Hypervisor label.id=ID label.info=Info label.ingress.rule=Ingress Rule label.initiated.by=Initiated By label.instance.limits=Instance Limits label.instance.name=Instance Name label.instance=Instance label.instances=Instances label.internal.dns.1=Internal DNS 1 label.internal.dns.2=Internal DNS 2 label.interval.type=Interval Type label.invalid.integer=Invalid Integer label.invalid.number=Invalid Number label.ip.address=IP Address label.ip.allocations=IP Allocations label.ip.limits=Public IP Limits label.ip.or.fqdn=IP or FQDN label.ip.range=IP Range label.ip=IP label.ips=IPs label.is.default=Is Default label.is.shared=Is Shared label.is.system=Is System label.iscsi=iSCSI label.iso.boot=ISO Boot label.iso=ISO label.isolation.mode=Isolation Mode label.keep=Keep label.lang.chinese=Chinese (Simplified) label.lang.english=English label.lang.japanese=Japanese label.lang.spanish=Spanish label.last.disconnected=Last Disconnected label.last.name=Last Name label.level=Level label.linklocal.ip=Link Local IP Adddress label.load.balancer=Load Balancer label.loading=Loading label.local=Local label.login=Login label.logout=Logout label.lun=LUN label.manage=Manage label.maximum=Maximum label.memory.allocated=Memory Allocated label.memory.total=Memory Total label.memory.used=Memory Used label.memory=Memory label.menu.accounts=Accounts label.menu.alerts=Alerts label.menu.all.accounts=All Accounts label.menu.all.instances=All Instances label.menu.community.isos=Community ISOs label.menu.community.templates=Community Templates label.menu.configuration=Configuration label.menu.dashboard=Dashboard label.menu.destroyed.instances=Destroyed Instances label.menu.disk.offerings=Disk Offerings label.menu.domains=Domains label.menu.events=Events label.menu.featured.isos=Featured ISOs label.menu.featured.templates=Featured Templates label.menu.global.settings=Global Settings label.menu.instances=Instances label.menu.ipaddresses=IP Addresses label.menu.isos=ISOs label.menu.my.accounts=My Accounts label.menu.my.instances=My Instances label.menu.my.isos=My ISOs label.menu.my.templates=My Templates label.menu.network.offerings=Network Offerings label.menu.network=Network label.menu.physical.resources=Physical Resources label.menu.running.instances=Running Instances label.menu.security.groups=Security Groups label.menu.service.offerings=Service Offerings label.menu.snapshots=Snapshots label.menu.stopped.instances=Stopped Instances label.menu.storage=Storage label.menu.system.vms=System VMs label.menu.system=System label.menu.templates=Templates label.menu.virtual.appliances=Virtual Appliances label.menu.virtual.resources=Virtual Resources label.menu.volumes=Volumes label.migrate.instance.to=Migrate instance to label.minimum=Minimum label.minute.past.hour=minute(s) Past the Hour label.monday=Monday label.monthly=Monthly label.more.templates=More Templates label.my.account=My Account label.name.optional=Name (Optional) label.name=Name label.netmask=Netmask label.network.desc=Network Desc label.network.domain=Network Domain label.network.id=Network ID label.network.name=Network Name label.network.offering.display.text=Network Offering Display Text label.network.offering.id=Network Offering ID label.network.offering.name=Network Offering Name label.network.offering=Network Offering label.network.rate=Network Rate label.network.read=Network Read label.network.type=Network Type label.network.write=Network Write label.network=Network label.new.password=New Password label.next=Next label.nfs.server=NFS Server label.nfs.storage=NFS Storage label.nfs=NFS label.nics=NICs label.no.actions=No Available Actions label.no.alerts=No Recent Alerts label.no.errors=No Recent Errors label.no.isos=No available ISOs label.no.items=No Available Items label.no.security.groups=No Available Security Groups label.no.thanks=No Thanks label.no=No label.none=None label.not.found=Not Found label.num.cpu.cores=# of CPU Cores label.numretries=Number of Retries label.offer.ha=Offer HA label.optional=Optional label.os.preference=OS Preference label.os.type=OS Type label.owned.public.ips=Owned Public IP Addresses label.owner.account=Owner Account label.owner.domain=Owner Domain label.parent.domain=Parent Domain label.password.enabled=Password Enabled label.password=Password label.path=Path label.please.wait=Please Wait label.pod=Pod label.port.forwarding=Port Forwarding label.port.range=Port Range label.prev=Prev label.primary.allocated=Primary Storage Allocated label.primary.network=Primary Network label.primary.storage=Primary Storage label.primary.used=Primary Storage Used label.private.interface=Private Interface label.private.ip.range=Private IP Range label.private.ip=Private IP Address label.private.ips=Private IP Addresses label.private.port=Private Port label.private.zone=Private Zone label.protocol=Protocol label.public.interface=Public Interface label.public.ip=Public IP Address label.public.ips=Public IP Addresses label.public.port=Public Port label.public.zone=Public Zone label.public=Public label.recent.errors=Recent Errors label.refresh=Refresh label.related=Related label.remove.from.load.balancer=Removing instance from load balancer label.removing.user=Removing User label.required=Required label.reserved.system.ip=Reserved System IP label.resource.limits=Resource Limits label.resource=Resource label.resources=Resources label.role=Role label.root.disk.offering=Root Disk Offering label.running.vms=Running VMs label.saturday=Saturday label.save=Save label.saving.processing=Saving.... label.scope=Scope label.search=Search label.secondary.storage=Secondary Storage label.secondary.used=Secondary Storage Used label.secret.key=Secret Key label.security.group.name=Security Group Name label.security.group=Security Group label.security.groups.enabled=Security Groups Enabled label.security.groups=Security Groups label.sent=Sent label.server=Server label.service.offering=Service Offering label.system.service.offering=System Service Offering label.session.expired=Session Expired label.shared=Shared label.size=Size label.snapshot.limits=Snapshot Limits label.snapshot.name=Snapshot Name label.snapshot.s=Snapshot (s) label.snapshot.schedule=Setup Recurring Snapshot label.snapshot=Snapshot label.snapshots=Snapshots label.source.nat=Source NAT label.specify.vlan=Specify VLAN label.start.port=Start Port label.state=State label.static.nat.to=Static NAT to label.static.nat=Static NAT label.statistics=Statistics label.status=Status label.step.1.title=Step 1: Select a Template label.step.1=Step 1 label.step.2.title=Step 2: Service Offering label.step.2=Step 2 label.step.3.title=Step 3: Select a Disk Offering label.step.3=Step 3 label.step.4.title=Step 4: Network label.step.4=Step 4 label.step.5.title=Step 5: Review label.step.5=Step 5 label.stopped.vms=Stopped VMs label.storage.type=Storage Type label.storage=Storage label.submit=Submit label.submitted.by=[Submitted by: ] label.succeeded=Succeeded label.sunday=Sunday label.system.capacity=System Capacity label.system.vm.type=System VM Type label.system.vm=System VM label.system.vms=System VMs label.tagged=Tagged label.tags=Tags label.target.iqn=Target IQN label.template.limits=Template Limits label.template=Template label.theme.default=Default Theme label.theme.grey=Custom - Grey label.theme.lightblue=Custom - Light Blue label.thursday=Thursday label.time.zone=Timezone label.time=Time label.timeout.in.second = Timeout(seconds) label.timezone=Timezone label.total.cpu=Total CPU label.total.vms=Total VMs label.traffic.type=Traffic Type label.tuesday=Tuesday label.type.id=Type ID label.type=Type label.unavailable=Unavailable label.unlimited=Unlimited label.untagged=Untagged label.update.ssl.cert=Update SSL Certificate label.update.ssl=Update SSL Certificate label.updating=Updating label.url=URL label.usage.interface=Usage Interface label.used=Used label.user=User label.username=Username label.users=Users label.value=Value label.vcenter.cluster=vCenter Cluster label.vcenter.datacenter=vCenter Datacenter label.vcenter.datastore=vCenter Datastore label.vcenter.host=vCenter Host label.vcenter.password=vCenter Password label.vcenter.username=vCenter Username label.version=Version label.virtual.appliance=Virtual Appliance label.virtual.appliances=Virtual Appliances label.virtual.network=Virtual Network label.vlan.id=VLAN ID label.vlan.range=VLAN Range label.vm.add=Add Instance label.vm.destroy=Destroy label.vm.reboot=Reboot label.vm.start=Start label.vm.stop=Stop label.vmfs=VMFS label.vms=VMs label.volume.limits=Volume Limits label.volume.name=Volume Name label.volume=Volume label.volumes=Volumes label.vsphere.managed=vSphere Managed label.waiting=Waiting label.warn=Warn label.wednesday=Wednesday label.weekly=Weekly label.welcome.cloud.console=Welcome to Management Console label.welcome=Welcome label.yes=Yes label.zone.id=Zone ID label.zone.step.1.title=Step 1: Select a Network label.zone.step.2.title=Step 2: Add a Zone label.zone.step.3.title=Step 3: Add a Pod label.zone.step.4.title=Step 4: Add an IP range label.zone.wide=Zone-Wide label.zone=Zone #Messages message.acquire.public.ip=Please select a zone from which you want to acquire your new IP from. message.action.cancel.maintenance.mode=Please confirm that you want to cancel this maintenance. message.action.cancel.maintenance=Your host has been successfully canceled for maintenance. This process can take up to several minutes. message.action.delete.ISO.for.all.zones=The ISO is used by all zones. Please confirm that you want to delete it from all zones. message.action.delete.ISO=Please confirm that you want to delete this ISO. message.action.delete.cluster=Please confirm that you want to delete this cluster. message.action.delete.disk.offering=Please confirm that you want to delete this disk offering. message.action.delete.domain=Please confirm that you want to delete this domain. message.action.delete.external.firewall=Please confirm that you would like to remove this external firewall. Warning: If you are planning to add back the same external firewall, you must reset usage data on the device. message.action.delete.external.load.balancer=Please confirm that you would like to remove this external load balancer. Warning: If you are planning to add back the same external load balancer, you must reset usage data on the device. message.action.delete.ingress.rule=Please confirm that you want to delete this ingress rule. message.action.delete.network=Please confirm that you want to delete this network. message.action.delete.pod=Please confirm that you want to delete this pod. message.action.delete.primary.storage=Please confirm that you want to delete this primary storage. message.action.delete.secondary.storage=Please confirm that you want to delete this secondary storage. message.action.delete.security.group=Please confirm that you want to delete this security group. message.action.delete.service.offering=Please confirm that you want to delete this service offering. message.action.delete.snapshot=Please confirm that you want to delete this snapshot. message.action.delete.template.for.all.zones=The template is used by all zones. Please confirm that you want to delete it from all zones. message.action.delete.template=Please confirm that you want to delete this template. message.action.delete.volume=Please confirm that you want to delete this volume. message.action.delete.zone=Please confirm that you want to delete this zone. message.action.destroy.instance=Please confirm that you want to destroy this instance. message.action.destroy.systemvm=Please confirm that you want to destroy this System VM. message.action.disable.static.NAT=Please confirm that you want to disable static NAT. message.action.enable.maintenance=Your host has been successfully prepared for maintenance. This process can take up to several minutes or longer depending on how many VMs are currently on this host. message.action.force.reconnect=Your host has been successfully forced to reconnect. This process can take up to several minutes. message.action.host.enable.maintenance.mode=Enabling maintenance mode will cause a live migration of all running instances on this host to any available host. message.action.instance.reset.password=Please confirm that you want to change the ROOT password for this virtual machine. message.action.primarystorage.enable.maintenance.mode=Warning: placing the primary storage into maintenance mode will cause all VMs using volumes from it to be stopped. Do you want to continue? message.action.reboot.instance=Please confirm that you want to reboot this instance. message.action.reboot.systemvm=Please confirm that you want to reboot this system VM. message.action.release.ip=Please confirm that you want to release this IP. message.action.remove.host=Removing last/only host in cluster and reinstalling the host will destroy working environment/database on the host and render the VM Guests unuseable. message.action.restore.instance=Please confirm that you want to restore this instance. message.action.start.instance=Please confirm that you want to start this instance. message.action.start.router=Please confirm that you want to start this router. message.action.start.systemvm=Please confirm that you want to start this system VM. message.action.stop.instance=Please confirm that you want to stop this instance. message.action.stop.systemvm=Please confirm that you want to stop this system VM. message.action.take.snapshot=Please confirm that you want to take a snapshot of this volume. message.add.cluster.zone=Add a hypervisor managed cluster for zone message.add.cluster=Add a hypervisor managed cluster for zone , pod message.add.disk.offering=Please specify the following parameters to add a new disk offering message.add.firewall=Add a firewall to zone message.add.host=Please specify the following parameters to add a new host message.add.ip.range.direct.network=Add an IP range to direct network in zone message.add.ip.range.to.pod=

Add an IP range to pod:

message.add.ip.range=Add an IP range to public network in zone message.add.load.balancer=Add a load balancer to zone message.add.network=Add a new network for zone: message.add.pod=Add a new pod for zone message.add.primary.storage=Add a new Primary Storage for zone , pod message.add.primary=Please specify the following parameters to add a new primary storage message.add.secondary.storage=Add a new storage for zone message.add.service.offering=Please fill in the following data to add a new compute offering. message.add.template=Please enter the following data to create your new template message.add.volume=Please fill in the following data to add a new volume. message.additional.networks.desc=Please select additional network(s) that your virtual instance will be connected to. message.advanced.mode.desc=Choose this network model if you wish to enable VLAN support. This network model provides the most flexibility in allowing administrators to provide custom network offerings such as providing firewall, vpn, or load balancer support as well as enabling direct vs virtual networking. message.advanced.security.group=Choose this if you wish to use security groups to provide guest VM isolation. message.advanced.virtual=Choose this if you wish to use zone-wide VLANs to provide guest VM isolation. message.allow.vpn.access=Please enter a username and password of the user that you want to allow VPN access. message.attach.iso.confirm=Please confirm that you want to attach the ISO to this virtual instance. message.attach.volume=Please fill in the following data to attach a new volume. If you are attaching a disk volume to a Windows based virtual machine, you will need to reboot the instance to see the attached disk. message.basic.mode.desc=Choose this network model if you do *not* want to enable any VLAN support. All virtual instances created under this network model will be assigned an IP directly from the network and security groups are used to provide security and segregation. message.change.offering.confirm=Please confirm that you wish to change the service offering of this virtual instance. message.copy.iso.confirm=Please confirm that you wish to copy your ISO to message.copy.template=Copy template XXX from zone to message.create.template.vm=Create VM from template message.create.template.volume=Please specify the following information before creating a template of your disk volume: . Creation of the template can range from several minutes to longer depending on the size of the volume. message.delete.account=Please confirm that you want to delete this account. message.detach.iso.confirm=Please confirm that you want to detach the ISO from this virtual instance. message.disable.account=Please confirm that you want to disable this account. By disabling the account, all users for this account will no longer have access to their cloud resources. All running virtual machines will be immediately shut down. message.disable.vpn.access=Please confirm that you want to disable VPN Access. message.download.ISO=Please click 00000 to download ISO message.download.template=Please click 00000 to download template message.download.volume=Please click 00000 to download volume message.edit.confirm=Please confirm that your changes before clicking "Save". message.edit.limits=Please specify limits to the following resources. A "-1" indicates no limit to the amount of resources create. message.enable.account=Please confirm that you want to enable this account. message.enable.vpn.access=VPN is currently disabled for this IP Address. Would you like to enable VPN access? message.enabled.vpn.ip.sec=Your IPSec pre-shared key is message.enabled.vpn=Your VPN access is currently enabled and can be accessed via the IP message.launch.vm.on.private.network=Do you wish to launch your instance on your own private dedicated network? message.lock.account=Please confirm that you want to lock this account. By locking the account, all users for this account will no longer be able to manage their cloud resources. Existing resources can still be accessed. message.migrate.instance.confirm=Please confirm the host you wish to migrate the virtual instance to. message.new.user=Specify the following to add a new user to the account message.no.network.support.configuration.not.true=You do not have any zone that has security group enabled. Thus, no additional network features. Please continue to step 5. message.no.network.support=Your selected hypervisor, vSphere, does not have any additional network features. Please continue to step 5. message.number.clusters=

# of Clusters

message.number.hosts=

# of Hosts

message.number.pods=

# of Pods

message.number.storage=

# of Primary Storage Volumes

message.number.zones=

# of Zones

message.remove.vpn.access=Please confirm that you want to remove VPN access from the following user. message.restart.mgmt.server=Please restart your management server(s) for your new settings to take effect. message.restart.mgmt.usage.server=Please restart your management server(s) and usage server(s) for your new settings to take effect. message.security.group.usage=(Use Ctrl-click to select all applicable security groups) message.snapshot.schedule=You can setup recurring snapshot schedules by selecting from the available options below and applying your policy preference message.step.1.continue=Please select a template or ISO to continue message.step.1.desc=Please select a template for your new virtual instance. You can also choose to select a blank template from which an ISO image can be installed onto. message.step.2.continue=Please select a service offering to continue message.step.2.desc= message.step.3.continue=Please select a disk offering to continue message.step.3.desc= message.step.4.continue=Please select at least one network to continue message.step.4.desc=Please select the primary network that your virtual instance will be connected to. message.update.os.preference=Please choose a OS preference for this host. All virtual instances with similar preferences will be first allocated to this host before choosing another. message.update.ssl=Please submit a new X.509 compliant SSL certificate to be updated to each console proxy virtual instance: message.virtual.network.desc=A dedicated virtualized network for your account. The broadcast domain is contained within a VLAN and all public network access is routed out by a virtual router. message.volume.create.template.confirm=Please confirm that you wish to create a template for this disk volume. Creation of the template can range from several minutes to longer depending on the size of the volume. message.zone.step.1.desc=Please select a network model for your zone. message.zone.step.2.desc=Please enter the following info to add a new zone message.zone.step.3.desc=Please enter the following info to add a new pod message.apply.snapshot.policy=You have successfully updated your current snapshot policy. message.disable.snapshot.policy=You have successfully disabled your current snapshot policy. message.action.change.service.warning.for.instance=Your instance must be stopped before attempting to change its current service offering. message.action.change.service.warning.for.router=Your router must be stopped before attempting to change its current service offering. message.action.reset.password.warning=Your instance must be stopped before attempting to change its current password. message.action.reset.password.off=Your instance currently does not support this feature. #Errors error.login=Your username/password does not match our records. error.menu.select=Unable to perform action due to no items being selected. error.mgmt.server.inaccessible=The Management Server is unaccessible. Please try again later. error.session.expired=Your session has expired. error.unresolved.internet.name=Your internet name cannot be resolved.