* server: fix resource count of primary storage if some volumes are Expunged but not removed
Steps to reproduce the issue
(1) create a vm and stop it. check resource count of primary storage
(2) download volume. resource count of primary storage is not changed.
(3) expunge the vm, the volume will be Expunged state as there is a volume snapshot on secondary storage. The resource count of primary storage decreased.
(4) update resource count of the account (or domain), the resource count of primary storage is reset to the value in step (2).
* New feature: Add support to destroy/recover volumes
* Add integration test for volume destroy/recover
* marvin: check resource count of more types
* messages translate to JP
* Update messages for CN
* translate message for NL
* fix two issues per Daan's comments
Co-authored-by: Andrija Panic <45762285+andrijapanicsb@users.noreply.github.com>
Problem: Currently tags cannot be applied to snapshot when it is being created but through separate “create tags” API calls. For snapshot policies tags cannot be set either at creation or through “create tags” API.
Root Cause: The “create snapshots” API does not support adding tags during creation and it can only be done through “create tags” API. Snapshot policy as a resource does not support tags and no tags can be set for them through any API.
Solution: Tag support for snapshot policy has been added. Snapshot policy with tags when executed will produce snapshots containing the same tags from snapshot policy.
Following APIs have been updated:
Both “create snapshotpolicy” and “create snapshot” now accepts “tags” as a new parameter. The expected format for “tags” parameter is similar to parameter “tags” in “create tags“ API.
Deletion support for tags associated with snapshots policy has been added to “delete snapshotpolicies” API.
Tags set for snapshot policies are added to the Response of “list snapshotpolicies“ API.
UI support for setting tags to snapshots and snapshot policy is provided through the corresponding menus with a new section in each form to set tags.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Problem: Volume created from a snapshot does not show its disk offering.
Root Cause: The volume created from a snapshot of a root disk does not have a disk offering therefore the disk offering of the created volume from the snapshot is empty.
Solution: Refactored createVolume API and extended UI to allow user to select a disk offering while creating a volume using a root disk volume snapshot. For creating volumes using data disk volume snapshot, the disk offering given by the snapshot will be assigned. Disk offering selection in the UI form for volume creation from snapshot is depicted in screenshot below.
Signed-off-by: Abhishek Kumar <abhishek.kumar@shapeblue.com>
Allows creating storage offerings associated with particular domain(s) and zone(s). In create disk/storage offfering form UI, a mult-select control has been addded to select desired zone(s) and domain select element has been made multi-select.
createDiskOffering API has been modified to allow passing list of domain and zone IDs with keys domainids and zoneids respectively. These lists are stored in DB in cloud.disk_offering_details table with 'domainids' and 'zoneids' key as string of comma separated list of IDs. Response for create, update and list disk offering APIs will return domainids, domainnames, zoneids and zonenames in details object of offering.
listDiskOfferings API has been modified to allow passing zoneid to return only offerings which are associated with the zone.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Using db column instead of VO variable name was causing issue with SQL select statement.
This change fixes the problem by using VO variable for adding conditional.
Fixes#3208
Using db column instead of VO variable name was causing issue with SQL select statement.
This PR fixes the problem by using VO variable for adding conditional.
Additionally in UI listAll parameter was being sent twice in the listVMSnapshot API call. It is fixed with this PR.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
After using the feature introduced by #2486 in production, we felt the need for an improvement in the UI. It is interesting to filter the displayed disk offerings according to the type of storage selected (local/shared) to migrate the volume to.
* [CLOUDSTACK-10323] Allow changing disk offering during volume migration
This is a continuation of work developed on PR #2425 (CLOUDSTACK-10240), which provided root admins an override mechanism to move volumes between storage systems types (local/shared) even when the disk offering would not allow such operation. To complete the work, we will now provide a way for administrators to enter a new disk offering that can reflect the new placement of the volume. We will add an extra parameter to allow the root admin inform a new disk offering for the volume. Therefore, when the volume is being migrated, it will be possible to replace the disk offering to reflect the new placement of the volume.
The API method will have the following parameters:
* storageid (required)
* volumeid (required)
* livemigrate(optional)
* newdiskofferingid (optional) – this is the new parameter
The expected behavior is the following:
* If “newdiskofferingid” is not provided the current behavior is maintained. Override mechanism will also keep working as we have seen so far.
* If the “newdiskofferingid” is provided by the admin, we will execute the following checks
** new disk offering mode (local/shared) must match the target storage mode. If it does not match, an exception will be thrown and the operator will receive a message indicating the problem.
** we will check if the new disk offering tags match the target storage tags. If it does not match, an exception will be thrown and the operator will receive a message indicating the problem.
** check if the target storage has the capacity for the new volume. If it does not have enough space, then an exception is thrown and the operator will receive a message indicating the problem.
** check if the size of the volume is the same as the size of the new disk offering. If it is not the same, we will ALLOW the change of the service offering, and a warning message will be logged.
We execute the change of the Disk offering as soon as the migration of the volume finishes. Therefore, if an error happens during the migration and the volume remains in the original storage system, the disk offering will keep reflecting this situation.
* Code formatting
* Adding a test to cover migration with new disk offering (#4)
* Adding a test to cover migration with new disk offering
* Update test_volumes.py
* Update test_volumes.py
* fix test_11_migrate_volume_and_change_offering
* Fix typo in Java doc
While executing the find/replace, I found some blocks of duplicated code. Therefore, I extracted the duplicated part to an utils file, and then removed the duplicated blocks.
- Fixes timezone issue where dates show up as nvalid in UI
- Introduces new event timeline listing/filtering of events
- Several UI improvements to add columns in list views
- Bulk operations support in instance list view to shutdown and destroy
multiple-selected VMs (limitation: after operation, redundant entries
may show up in the list view, refreshing VM list view fixes that)
- Align table thead/tbody to avoid splitting of tables
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-9972: Enhance listVolume API to include physical size and utilization.
Also fixed pool, cluster and pod info
* CLOUDSTACK-9972: Fix volume_view and duplicate API constant
* CLOUDSTACK-9972: Backport Do not allow vms to be deployed on hosts that are in disabled pod
* CLOUDSTACK-9972: Fix localization missing keys
* CLOUDSTACK-9972: Fix sql path
(1) add support to create/delete/revert vm snapshots on running vms with QCOW2 format
(2) add new API to create volume snapshot from vm snapshot
(3) delete metadata of vm snapshots before stopping/migrating and recover vm snapshots after starting/migrating
(4) enable deleting of VM snapshot on stopped vm or vm snapshot is not listed in qcow2 image.
(5) enable smoke tests for vmsnaphsots on KVM
The resize volume is support on all major hypervisors (Xen, VMware, KVM).
The hypervisor key is returned by the list volumes response only for admins
but not for users or domain admin users. This removes the check, as the operation
is supported on all major hypervisors that CloudStack supports.
With this changes all users would see resize volume button in the UI.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Added conditions to check if the name is empty or blank.
If it is empty or blank, then it generates a random name.
Made the name field as optional in UI as well as in API.
Added required unit tests.
Implements various metrics views based on a listView based widget that has following
properties:
- vertically and horizontally scrollable with pagination/infinite scrolling
- sortable columns (client side)
- groupable/collapsible columns
- alternate row coloring
- refresh button to refresh views
- threshold table cell coloring
- panel/breadcrumb navigation
- quick view action column
- translatable labels
- sorts after metrics is refreshed, if a column was previously sorted
- sorts after adding rows on infinite scrolling if a column was pre-sorted
- Metrics views: Zones, Clusters, Hosts, Instances, Storage pools, Volumes
- Resource filtering/navigation: Zones->Clusters->Hosts->Instances->Volumes,
Storage Pool->Volumes
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- on new functionnality: upload volume/template from Local
- on the zone configuration wizard for the "Next" button
- update French messages properties from transifex
- Improve some French translations ("Téléverser" for "Upload")
As recently discussed on the dev list:
This sorts the domain lists based on their path.
Especially handy when having a lot of domains,
like in a public cloud.
