* 4.9:
moved logrotate from cron.daily to cron.hourly for vpcrouter in cloud-early-config
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
[4.9] CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agentThe router.aggregation.command.each.timeout in global configuration is only applied on new created KVM host.
For existing KVM host, changing the value will not be effective.
We need to propagate the configuration to existing host when cloudstack-agent is connected.
* pr/1856:
CLOUDSTACK-9569: propagate global configuration router.aggregation.command.each.timeout to KVM agent
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
ipv6: Set IPv6 CIDR and Gateway in 'nic' profileWithout this information a NPE might be triggered when starting a VR, SSVM or CP
as this information is read from the 'nics' table and causes a NPE.
During deployment we should set the IPv6 Gateway and CIDR for the NIC object so that
it is persisted to the database.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* pr/1927:
ipv6: Set IPv6 CIDR and Gateway in 'nic' profile
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This closes#1644
* 4.9:
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable Unhides snapshot.backup.rightafter from global configuration
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable
Unhides snapshot.backup.rightafter from global configuration
If snapshot.backup.rightafter is set to false (defaults to true), snapshots are
not backed up to secondary storage.
This is the same as PR #1644 applied to 4.9, as per @jburwell
* pr/1697:
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable Unhides snapshot.backup.rightafter from global configuration
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Without this information a NPE might be triggered when starting a VR, SSVM or CP
as this information is read from the 'nics' table and causes a NPE.
During deployment we should set the IPv6 Gateway and CIDR for the NIC object so that
it is persisted to the database.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
(1) add support to create/delete/revert vm snapshots on running vms with QCOW2 format
(2) add new API to create volume snapshot from vm snapshot
(3) delete metadata of vm snapshots before stopping/migrating and recover vm snapshots after starting/migrating
(4) enable deleting of VM snapshot on stopped vm or vm snapshot is not listed in qcow2 image.
(5) enable smoke tests for vmsnaphsots on KVM
CLOUDSTACK-9456: Migrate master to Spring 4.xThis changes makes CloudStack use spring 4:
```
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK7
- Bump servet dependency version
- Migrates various xmls to use version independent schema uris
```
Outstanding issue:
- Testing of various non-standard plugins such as network and storage plugins etc.
Since, this is a big change pinging for review -- @jburwell @karuturi @wido @murali-reddy @abhinandanprateek @DaanHoogland @GaborApatiNagy @JayapalUradi @kishankavala @K0zka @nvazquez @rafaelweingartner @pyr and others
@blueorangutan package
* pr/1638:
CLOUDSTACK-9456: Update Spring version in maven poms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9683: system.vm.default.hypervisor will pin the hypervisor for VR too with this fix
* pr/1839:
CLOUDSTACK-9683: system.vm.default.hypervisor will pin the hypervisor for VR too with this fix
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Introduced a global configuration flag 'cluster.threshold.enabled'. By default the flag is true.
If the value is false, then a VM can be started in a cluster even if the cluster thresholds are
crossed. However, for a new VM deployment the cluster threshold will always be honoured.
Made the changes to improve logging.CLOUSTACK-9465 Several log refactoring/improvement suggestions.
There are two scenarios of logging which needs refactoring/improvement:
Method invocation replaced by variable
This means that in the logging code, the method invocation is pre-defined as a variable. for simplicity, the method invocation should be replaced by the variable.
Delete variable which must be null
The variable in the logging code is null, there is no need to put the variable there.
* pr/1705:
Made the changes to improve logging.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
KVM hosts on shared storage failure was accepted by mgmt server with the
host state as Up, even though there was no primary/shared storage available on
it. This patch offers a quick fix by throwing an exception in the storage monitor
which connects storage pool on host. The failure is trapped by agent manager
that disconnects the agent without any investigation.
Based on Lab tests, KVM agent may take upto 2 minutes to attempt NFS mount when
the storage is inaccessible (firewalled, or shutdown) before returning back with
an error. It is safe to assume that this won't add pressure on mgmt server due to
several reconnection attempts, and KVM agent would retry reconnection every 2
minutes.
For such KVM hosts, where failure happens due to storage issues; they will be
briefly put in Alert state but will be mostly be in Connecting state during which
the KVM host attempts to mount/reconfigure NFS storage pool.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Unhides snapshot.backup.rightafter from global configuration
If snapshot.backup.rightafter is set to false (defaults to true), snapshots are
not backed up to secondary storage
Adding support for cross-cluster storage migration for managed storage when using XenServerThis PR adds support for cross-cluster storage migration of VMs that make use of managed storage with XenServer.
Managed storage is when you have a 1:1 mapping between a virtual disk and a volume on a SAN (in the case of XenServer, an SR is placed on this SAN volume and a single virtual disk placed in the SR).
Managed storage allows features such as storage QoS and SAN-side snapshots to work (sort of analogous to VMware VVols).
This PR focuses on enabling VMs that are using managed storage to be migrated across XenServer clusters.
I have successfully run the following tests on this branch:
TestVolumes.py
TestSnapshots.py
TestVMSnapshots.py
TestAddRemoveHosts.py
TestVMMigrationWithStorage.py (which is a new test that is being added with this PR)
* pr/1671:
Adding support for cross-cluster storage migration for managed storage when using XenServer
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Added checks to prevent netwrok update when router state is unknown or when
the new offering removes a service that is in use.
Added a new param forced to the updateNetwork API. The network will
undergo a forced update when this param is set to true.
CLOUDSTACK-8751 Clean network config like firewall rules etc, when network services are removed during network update.
Often, patch and security releases do not require schema migrations or
data migrations. However, if an empty upgrade class and associated
scripts are not defined, the upgrade process will break. With this
change, if a release does not have an upgrade, a noop DbUpgrade is added
to the upgrade path. This approach allows the upgrade to proceed and
for the database to properly reflect the installed version. This change
should make the release process simpler as RMs no longer need to
rememeber to create this boilerplate code when starting a new release.
Beginning with the 4.8.2.0 and 4.9.1.0 releases, the project will
formally adopt a four (4) position release number to properly accomodate
rekeases that contain only CVE fixes. The DatabaseUpgradeChecker and
Version classes made assumptions that they would always parse and
compare three (3) position version numbers. This change adds the
CloudStackVersion value object that supports both three (3) and four (4)
version numbers. It encapsulates version comparsion logic, as well as,
the rules to allow three (3) and four (4) to interoperate.
* Modifies DatabaseUpgradeChecker to handle derive an upgrade path for
a version that was not explicitly specified. It determines the
releases the first release before it with database migrations and uses
that list as the basis for the list for version being calculated. A
noop upgrade is then added to the list which causes no schema changes
or data migrations, but will update the database to the version.
* Adds unit tests for the upgrade path calculation logic in
DatabaseUpgradeChecker
* Removes dummy upgrade logic for the 4.8.2.0 introduced in previous
versions of this patch
* Introduces the CloudStackVersion value object which parses and
compares three (3) and four (4) position version numbers. This class
is intended to replace com.cloud.maint.Version.
* Adds the junit-dataprovider dependency -- allowing test data to be
concisely generated separately from the execution of a test case.
Used extensively in the CloudStackVersionTest.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9348: NioConnection improvementsReopened PR with squashed changes for a re-review and testing after https://github.com/apache/cloudstack/pull/1493 and sub-sequent PRs got reverted
* pr/1549:
CLOUDSTACK-9348: NioConnection improvements
Signed-off-by: Will Stevens <williamstevens@gmail.com>
Taking fast and efficient volume snapshots with XenServer (and your storage provider)A XenServer storage repository (SR) and virtual disk image (VDI) each have UUIDs that are immutable.
This poses a problem for SAN snapshots, if you intend on mounting the underlying snapshot SR alongside the source SR (duplicate UUIDs).
VMware has a solution for this called re-signaturing (so, in other words, the snapshot UUIDs can be changed).
This PR only deals with the CloudStack side of things, but it works in concert with a new XenServer storage manager created by CloudOps (this storage manager enables re-signaturing of XenServer SR and VDI UUIDs).
I have written Marvin integration tests to go along with this, but cannot yet check those into the CloudStack repo as they rely on SolidFire hardware.
If anyone would like to see these integration tests, please let me know.
JIRA ticket: https://issues.apache.org/jira/browse/CLOUDSTACK-9281
Here's a video I made that shows this feature in action:
https://www.youtube.com/watch?v=YQ3pBeL-WaA&list=PLqOXKM0Bt13DFnQnwUx8ZtJzoyDV0Uuye&index=13
* pr/1403:
Faster logic to see if a cluster supports resigning
Support for backend snapshots with XenServer
Signed-off-by: Will Stevens <williamstevens@gmail.com>
