In case of vmware host failure, all the VMs including stopped VMs migrate
to the new host. For the Stopped Vms powerhost gets updated. This was
triggering HandlePowerStateReport which finally calls updatePowerState
updating update_time for the VM. This cause the capacity being reserved
for stopped VMs.
CLOUDSTACK 9601: Upgrade: change logic for update path for filesFor going from version A to version D, it uses to run the SQL files in
that order: A -> B -> C -> D -> A-cleanup -> B-cleanup -> C-cleanup ->
D-cleanup. If you had upgraded each version separatively you would have
run A -> A-cleanup -> B -> B-cleanup -> C -> C-cleanup -> D ->
D-cleanup.
This change the logic to follow the same path if you are jumping over
versions.
Signed-off-by: Marc-Aurle Brothier <m@brothier.org>
* pr/1768:
Upgrade: change logic for update path for files
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This improves the metrics view feature by improving the rendering performance
of metrics view tables, by reimplementing the logic at the backend and data
served via APIs. In large environments, the older implementation would
make several API calls that increases both network and database load.
List of APIs introduced for improving the performance:
listClustersMetrics
listHostsMetrics
listInfrastructure
listStoragePoolsMetrics
listVMsMetrics
listVolumesMetrics
listZonesMetrics
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9660: NPE while destroying volumes during 1000 VMs deploy and destroy tests
NPE is seen as VM destroy and storage cleanup threads try to remove the same root volume. Fix is to handle
only non-root volumes in storage cleanup thread, root volumes will be handled as part of VM destroy.
* pr/1825:
CLOUDSTACK-9660: NPE while destroying volumes during 1000 VMs deploy and destroy tests NPE is seen as VM destroy and storage cleanup threads try to remove the same root volume. Fix is to handle only non-root volumes in storage cleanup thread, root volumes will be handled as part of VM destroy.
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
ipv6: Set IPv6 CIDR and Gateway in 'nic' profileWithout this information a NPE might be triggered when starting a VR, SSVM or CP
as this information is read from the 'nics' table and causes a NPE.
During deployment we should set the IPv6 Gateway and CIDR for the NIC object so that
it is persisted to the database.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
* pr/1927:
ipv6: Set IPv6 CIDR and Gateway in 'nic' profile
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
For going from version A to version D, it uses to run the SQL files in
that order: A -> B -> C -> D -> A-cleanup -> B-cleanup -> C-cleanup ->
D-cleanup. If you had upgraded each version separatively you would have
run A -> A-cleanup -> B -> B-cleanup -> C -> C-cleanup -> D ->
D-cleanup.
This change the logic to follow the same path if you are jumping over
versions.
Signed-off-by: Marc-Aurèle Brothier <m@brothier.org>
CLOUDSTACK-9766 : Executing deleteSnapshot api with already deleted sIf we try to delete the snapshot which is already deleted, then no proper error appears in the log and it just try to delete the snapshot which is already deleted.
Steps to reproduce :
-------
1-create a snapshot
2-delete the snapshot
3-try to delete snapshot which is deleted in step 2
Expected Result
-------------
Result should show proper error message. Request for deleting already deleted snapshot should not be placed.
* pr/1924:
CLOUDSTACK-9766 : Executing deleteSnapshot api with already deleted snapshot does not throw any exception or failure message
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9574: Redesign storage views## Part 1: Redesign storage tags
### Actual behavior
Primary storage tags are being saved as an entry on `storage_pool_details` with:
* name = TAG_NAME
* value = "true"
When a boolean property is defined in {{storage_pool_details}} and has value = "true", it is displayed as a tag.
### Goal
Redesign `Storage Tags` for Primary Storage view, to list only tags, as it is done in Host Tags (Hosts view).
## Part 2: Remove details from listImageStores API call response and UI
### Description
In Secondary Storage view we propose removing `Details` field, as `Setting` tab list details for a given image store. We also remove details from response on `listImageStores` API method
* pr/1747:
CLOUDSTACK-9574: Redesign storage tags and remove details from listImageStores response and UI
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
This closes#1644
* 4.9:
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable Unhides snapshot.backup.rightafter from global configuration
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable
Unhides snapshot.backup.rightafter from global configuration
If snapshot.backup.rightafter is set to false (defaults to true), snapshots are
not backed up to secondary storage.
This is the same as PR #1644 applied to 4.9, as per @jburwell
* pr/1697:
CLOUDSTACK-4858 Honors the snapshot.backup.rightafter configuration variable Unhides snapshot.backup.rightafter from global configuration
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9738: [Vmware] Optimize vm expunge process for instances with vm snapshots## Description
It was noticed that expunging instances with many vm snapshots took a look of time, as hypervisor received as many tasks as vm snapshots instance had, apart from the delete vm task. We propose a way to optimize this process for instances with vm snapshots by sending only one delete task to hypervisor, which will delete vm and its snapshots
## Use cases
1. deleteVMsnapohsot-> no changes to current behavior
2. destroyVM with expunge=false -> no actions to VMsnaphsot is performed at the moment. When VM cleanup thread is executed it will perform the same sequence as (3). If instance is recovered before expunged by the cleanup thread it will remain intact with VMSnapshot chain present
3. destroyVM with expunge=true:
* Vmsnaphsot is marked with removed timestamp and state = Expunging in DB
* VM is deleted in HW
* pr/1905:
CLOUDSTACK-9738: [Vmware] Optimize vm expunge process for instances with vm snapshots
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
Without this information a NPE might be triggered when starting a VR, SSVM or CP
as this information is read from the 'nics' table and causes a NPE.
During deployment we should set the IPv6 Gateway and CIDR for the NIC object so that
it is persisted to the database.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
[4.10] CLOUDSTACK-8746: VM Snapshotting implementation for KVM
* pr/977:
Fixes for testing VM Snapshots on KVM. Related to PR 977
CLOUDSTACK-8746: vm snapshot implementation for KVM
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
CLOUDSTACK-9619: Updates for SAN-assisted snapshotsThis PR is to address a few issues in #1600 (which was recently merged to master for 4.10).
In StorageSystemDataMotionStrategy.performCopyOfVdi we call getSnapshotDetails. In one such scenario, the source snapshot in question is coming from secondary storage (when we are creating a new volume on managed storage from a snapshot of ours thats on secondary storage).
This usually worked in the regression tests due to a bit of "luck": We retrieve the ID of the snapshot (which is on secondary storage) and then try to pull out its StorageVO object (which is for primary storage). If you happen to have a primary storage that matches the ID (which is the ID of a secondary storage), then getSnapshotDetails populates its Map<String, String> with inapplicable data (that is later ignored) and you dont easily see a problem. However, if you dont have a primary storage that matches that ID (which I didnt today because I had removed that primary storage), then a NullPointerException is thrown.
I have fixed that issue by skipping getSnapshotDetails if the source is coming from secondary storage.
While fixing that, I noticed a couple more problems:
1) We can invoke grantAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
2) We can invoke revokeAccess on a snapshot thats actually on secondary storage (this doesnt amount to much because the VolumeServiceImpl ignores the call when its not for a primary-storage driver).
I have corrected those issues, as well.
I then came across one more problem:
When using a SAN snapshot and copying it to secondary storage or creating a new managed-storage volume from a snapshot of ours on secondary storage, we attach to the SR in the XenServer code, but detach from it in the StorageSystemDataMotionStrategy code (by sending a message to the XenServer code to perform an SR detach). Since we know to detach from the SR after the copy is done, we should detach from the SR in the XenServer code (without that code having to be explicitly called from outside of the XenServer logic).
I went ahead and changed that, as well.
JIRA Ticket:
https://issues.apache.org/jira/browse/CLOUDSTACK-9619
* pr/1749:
CLOUDSTACK-9619: Updates for SAN-assisted snapshots
Signed-off-by: Rajani Karuturi <rajani.karuturi@accelerite.com>
(1) add support to create/delete/revert vm snapshots on running vms with QCOW2 format
(2) add new API to create volume snapshot from vm snapshot
(3) delete metadata of vm snapshots before stopping/migrating and recover vm snapshots after starting/migrating
(4) enable deleting of VM snapshot on stopped vm or vm snapshot is not listed in qcow2 image.
(5) enable smoke tests for vmsnaphsots on KVM
- Switches Travis to use jdk1.8
- Changes java-version to 1.8
- Change jdk/maven version to 1.8
- Switch to F5/java8 compatible library release
- Switch packaging to use jdk 1.8, and jre 1.8 in init/systemd scripts
- Switch systemvm to openjdk-8-jre
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9456: Migrate master to Spring 4.xThis changes makes CloudStack use spring 4:
```
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK7
- Bump servet dependency version
- Migrates various xmls to use version independent schema uris
```
Outstanding issue:
- Testing of various non-standard plugins such as network and storage plugins etc.
Since, this is a big change pinging for review -- @jburwell @karuturi @wido @murali-reddy @abhinandanprateek @DaanHoogland @GaborApatiNagy @JayapalUradi @kishankavala @K0zka @nvazquez @rafaelweingartner @pyr and others
@blueorangutan package
* pr/1638:
CLOUDSTACK-9456: Update Spring version in maven poms
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9597: Should not fetch resource count for removed entityFetch the number of resourceCount by domain and account excluding the removed ones.
Signed-off-by: Marc-Aurle Brothier <m@brothier.org>
* pr/1764:
CLOUDSTACK-9597: Should not fetch resource count for removed entity
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Rvr Network with cleanup which is updated from the isolated network is failed.
Corrected the column name string issue.
This closes#1781
(cherry picked from commit 0f742e17237fc84d5e86dae9a67c7ef6a0b6c80c)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-9683: system.vm.default.hypervisor will pin the hypervisor for VR too with this fix
* pr/1839:
CLOUDSTACK-9683: system.vm.default.hypervisor will pin the hypervisor for VR too with this fix
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
store ref table so builtin template is never downloaded completely
In handleSysTemplateDownload method creating template only if there exists no entry
handleTemplateSync will take care of other scenario
- Bump spring-framework version to 4.x and Jetty to version that runs with JDK8
- Bump servet dependency version
- Migrate spring xmls to version 4, fixes schema locations that are 3.0
dependent in various xmls.
- Fix failing tests due to spring upgrade
(Thanks @marcaurele Marc-Aurèle Brothier for fixing them)
* Fix test DeploymentPlanningManagerImplTest
* Fix GloboDNS test
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
CLOUDSTACK-8908 After copying the template charging for that template is getting stoppedThis is happening as the zone id is not part of the query. Zone id is added to the query and unit tests are also added
* pr/896:
CLOUDSTACK-8908 After copying the template charging for that template is stopped
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
