While searching for existing route, don't use the throw keyword when
using the cmd with `ip route show`.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Increase lease time to infinite
Lease time set to effectively infinite (36000+ days) since we fully control VM lifecycle via CloudStack
Infinite time helps avoid some edge cases which could cause DHCPNAK being sent to VMs since
(RHEL) system lose routes when they receive DHCPNAK
When VM is expunged, it's active lease and DHCP/DNS config is properly removed from related files in VR.
* desc fix
This fixes to avoid forking curl to save password but instead call
a HTTP POST url directly within Python code. This may reduce bottleneck
during high VM launches that require passwords.
Fixes#3182
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
In some virtual routers, 'hostname -f' returns 'localhost'. The hostname is also 'localhost' in `/var/log/messages`. This change can fix the issue in new VRs.
In order to reduce memory footprint and improve boot speed/predictability.
The following changes have been made:
- add vm.min_free_kbytes to sysctl
- periodically clear disk cache (depending on memory size)
- only start guest services specific to hypervisor
- use systemvm code to determine hypervisor type (not systemd)
- start cloud service at end of post init rather than through systemd
- reduce initial threads started for httpd
- fix vmtools config file
Fixes#3039
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This does not remove VM entries in dbags when hostnames match. The
current codebase already removes entry when a VM is stopped/removed so
we don't need to handle lazy removal. This will allow a VM on
multiple-tiers in a VPC to get dns/dhcp rules as expected.
This also fixes the issue of dhcp_release based on a specific interface and
removes dhcp/dns entry when a nic is removed on a guest VM.
Fixes#3273
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
The VR code has provision for inserting rules at the top or bottom by specifying "front" as the second parameter to self.fw.append. However, there are a number of cases where someone has been unaware of this and added a rule with the pattern self.fw.append(["mangle", "", "-I PREROUTING".... This causes the code to check for the rule already being present to fail, and duplicate rules end up being added.
This PR fixes two of these cases which apply to adding static NAT rules. I am aware of more of these cases, but I don't have the ability to easily test the outcome of fixing them. I'm happy to add these in if you're confident that the automated tests will be sufficient. Searching for "-I (case sensitive) finds these.
The code for dealing with "front" is included below to show that this shouldn't have any ill effects:
if fw[1] == "front":
cpy = cpy.replace('-A', '-I')
Fixes#3177
Since the CloudStack virtual router was redesigned on version 4.6 it has been observed that the DHCP leases file is not persistent across network operations. This causes conflicts on guest VMs static IPs, causing these static IPs to not be renewed by the DHCP server running on isolated and VPC networks' virtual routers (dnsmasq). On stopping or destroying a VM, its dhcp/dns records are not removed from the virtual router causing ghost effects.
Fixes#3272Fixes#3354
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR resolves 2 issues related to Virtual Routers with multiple public interfaces, and works around a third.
- Fixes#3353 - Adds missing throw routes for eth0/eth1 to eth3+ when there are >1 public IPs
- Fixes#3168 - Incorrect marks set on some static NAT rules (some code references were changed from hex(int(interfacenum)) to hex(100 + int(interfacenum)) - this change just adds the remaining ones
- Fixes#3352 - Work around that sends Gratuitous ARP messages when a HA VR becomes master to work around the problem of the MAC address being different between HA VRs. If that issue is fixed properly (i.e. a database entry for the subsequent interfaces so they can be static) then this is unnecessary, though should not cause any problems.
On first startup, the management server creates and saves a random
ssh keypair using ssh-keygen in the database. The command does
not specify keys in PEM format which is not the default as generated
by latest ssh-keygen tool.
The systemvmtemplate always needs re-building whenever there is a change
in the cloud-early-config file. This also tries to fix that by introducing a
stage 2 bootstrap.sh where the changes specific to hypervisor detection
etc are refactored/moved. The initial cloud-early-config only patches
before the other scripts are called.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a new patching script for patching systemvms on KVM
using qemu-guest-agent that runs inside the systemvm on startup. This
also removes the vport device which was previously used by the legacy
patching script and instead uses the modern and new uniform guest
agent vport for host-guest communication.
Also updates the sytemvmtemplate build config to use the latest Debian
9.9.0 iso.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* systemd: fix services to allow TLS configurations via java.security.ciphers
This fixes the management server and systemd services to allow the
java.security.ciphers file to configure disabled TLS protocols and
algorithms. This also cleans up systemd service files for agent and
usage server.
This fixes#3140
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* configure: fix travis failure due pycodestyle error
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
After upgrade from CS 4.10 to CS 4.11, multiple VRs did not start through.
It did not properly defer the finalize config in update_config.py.
Apparently, the json files are now called differently: where it used to
be vm_dhcp_entry.json it now has a uuid added, for example
vm_metadata.json.4d727b6e-2b48-49df-81c3-b8532f3d6745.
The if statement that checks if the finalize can be safely deferred
therefore no longer matches. This PR contains a fix so finalize is
defered again.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes an issue for systemvms (CPVM and SSVM) on VMware, as eth0
is not programmed (link-local) the networking.service fails to start
which is a dependency for cloud-postinit service. When cloud-postinit
service fails to start/run, it fails to start the agent (cloud) process.
This fixes the smoketest failures we saw in case of VMware 6.5 with
4.11.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This tries to provide a threshold based fix for #2873 where swappinness of VR is not used until last resort. By limiting swappiness unless actually needed, the VR system degradation can be avoided for most cases. The other change is around not starting baremetal-vr by default on all VRs, according to the spec https://cwiki.apache.org/confluence/display/CLOUDSTACK/Baremetal+Advanced+Networking+Support only vmware VRs need to run it and that too only as the last step of the setup/completion, so we don't need to run it all the time.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This fixes#2719 where private gateway IP might be incorrectly
programmed on a guest network nic. The VR would now check ipassoc
requests by mac addresses than provided nic/device id in case they are
wrong.
The root cause is that the device id information is lost when aggregated
commands are created upon starting of a new VPC VR, without the correct
device id in ip_associations json it mis-programs the VR.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
We see a suspicious continuous increase in memory usage. Kind of looks like a memory leak.
One thing noted during debugging is that flask is started in debug mode. This is not best practice for a production system.
This fixes a regression introduced in #2799, by exporting $TYPE
before the `patch` is called to patch/extract archives for ssvm/cpvm.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
VMware router will be rebooted based on #2794, per current config
the VRs on reboot will go through fsck checks slowing down the deployment
process by few seconds. This will ensure that fsck checks are done
on every 3rd boot of the VR. The `4` is used because 1st boot is done
during the build of systemvmtemplate appliance.
Add upgrade path for a new 4.11.2 systemvmtemplate.
Other changes:
- Add support for XS 7.5 Fixes#2834.
- Reboot VR only if mgmt gw is not pingable on vmware.
- Enable passive ftp by enabling nf_conntrack_helper. This is change in behaviour since linux 4.7
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Arping command in virtual-router was called anyway on python code.
on file: merge.py
line 239, in this code : "dp['gateway'] ='None' ''
later on CsAddress.py line 303
if 'gateway' in self.address:
self.arpPing()
This string 'None' makes if steatement always be true
the solution on #2806 makes dp['gateway'] =''
Cannot be None type because there is a string operation later on code.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* 4.11:
Changed the implementation of isVolumeOnManagedStorage(VolumeInfo) to check if the data store in question is for primary storage (and added a unit test from Daan Hoogland)
vmware: reboot VR after mac updates (#2794)
This re-introduces the rebooting of VR after setup of nics/macs in
case of VMware. It also adds a minor enhancement to show the console
esp. for root admins when VRs and systemvms are in starting state.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Previously, the ethernet device index was used as rt_table index and
packet marking id/integer. With eth0 that is sometimes used as link-local
interface, the rt_table index `0` would fail as `0` is already defined
as a catchall (unspecified). The fwmarking on packets on eth0 with 0x0
would also fail. This fixes the routing issues, by adding 100 to the
ethernet device index so the value is a non-zero, for example then the
relationship between rt_table index and ethernet would be like:
100 -> Table_eth0 -> eth0 -> fwmark 100 or 0x64
101 -> Table_eth1 -> eth1 -> fwmark 101 or 0x65
102 -> Table_eth2 -> eth2 -> fwmark 102 or 0x66
This would maintain the legacy design of routing based on packet mark
and appropriate routing table rules per table/ids. This also fixes a
minor NPE issue around listing of snapshots.
This also backports fixes to smoketests from master.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
