Make use of Java 8 default implementation in interfaces,
to remove code duplication between XxxCmd and XxxCmdAsAdmin.
Refactor checkFormat by pre-calculating the supported
extensions. Also make use of this in ImageStoreUtil.
Makes it easier to add new file and compression formats.
Features:
Zone-wide and cluster-wide primary storage support
VM template caching automatically on Datera, the subsequent VMs can be created instantaneously by fast cloning the root volume.
Rapid storage-native snapshot
Multiple managed primary storages can be created with a single Datera cluster to provide better management of
Total provisioned capacity
Default storage QoS values
Replica size ( 1 to 5 )
IP pool assignment for iSCSI target
Volume Placement ( hybrid, single_flash, all_flash )
Volume snapshot to VM template
Volume to VM template
Volume size increase using service policy
Volume QoS change using service policy
Enabled KVM support
New Datera app_instance name format to include ACS volume name
VM live migration
There are certain scenarios where the 169.254.0.0/16 subnet is used for different
purposes then CloudStack on a hypervisor.
Once of such scenarios is a BGP+EVPN+VXLAN setup using BGP Unnumbered where the
169.254.0.1 address is used by Frr/Zebra BGP routing to send traffic to the
neighboring router.
The following settings can be changed in the agent.properties (default values added):
control.cidr=169.254.0.0/16
Make sure the global setting 'control.cidr' matches the values defined in the agent.propeties!
In the future the mgmt server can send this parameter to a KVM Agent on startup, but at the moment
this framework is not in place and thus these values can't be send to the Agent in a proper manner.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Currently when refreshing disk usage stats all kvm agents are asked to collect stats for all volumes. In setups with multiple kvm hosts where managed storage is used, not all volumes are attached to all kvm hosts, this results in a large number of warnings in the kvm agent logs. This change introduces a filter step in case managed storage is used so that the management server only requests kvm agents for stats about volumes that are connected to each kvm host.
Fixes checkstyle issue caused by previous commit 6a511fce40f5363d71c5515df9841c2493c73c31
from PR #3466 where a minor review fix did not address this. Merging this
one to unblock few other PRs after running a local build test.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Add CephSnapshotStrategy to handle RBD revert (rollback) snapshot. In order to support RBD revert (rbd_rollback), this PR adds a CephSnapshotStrategy class to handle Ceph/RBD snapshot actions.
Fixes: #3114
When adding iprange for VLANs there are 3 cases -
VLAN under consideration has a tag (like 101)
VLAN under consideration has a tag but as a range (like 101-124)
VLAN is untagged (i.e. id is "untagged")
Before adding iprange we have to check for possible overlaps and throw exception. This needs to be done as follows -
If VLAN Tag ID is numeric or a range we need to call UriUtils.checkVlanUriOverlapmethod which internally tries to expand the range as verifies if there are overlaps. If URI overlaps (i.e. there are overlapping VLAN tags) we then need to verify if the iprange being added overlaps with previously added ranges.
If there are no overlapping tags we simply need to test for public networks being present in the VLAN.
A Regression was introduced in 41fdb88#diff-6e2b61984e8fa2823bb47da3caafa4eeR3174 which caused comparing 'untagged' string as a numeric VLAN Tag range and and attempted expanding it to test overlap in UriUtils.checkVlanUriOverlap.
To fix the bug in the issue, we need to handle the untagged case separately as it's non-numeric tag in code. For untagged VLANs and overlapping VLAN URIs we need to check for ipranges and gateways which happens naturally after this change. For tagged VLANs with non-overlapping URIs we need to check if there is a public network.
During volume stats calculation, if a volume has more than one disk in
the chain-info it is not used to sum the physical and virtual size
in the loop, instead any previous entry was overwritten by the last disk.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Set integration.api.port to (0) zero as default. CloudStack provides CloudStack API Unauthenticated Access through port 8096. It should not be open to the Internet in any case.
* Allow users to share templates with Accounts or Projects through the
updateTemplate permissions API
* Change behaviour to show only supported projects and accounts with update template permissions
* Allow admins to see accounts dropdown and only hide lists for users
* Don't allow sharing project owned templates as you cannot retrieve them in list api calls
* Add revoke certificates API
* Add background task to sync certificates
* Fix marvin test and revoke certificate
* Fix certificate sent to hypervisor was missing headers
* Fix background task for uploading certificates to hosts
Fix small UI issue when dedicating public IR range for system VMs:
Unable to execute API command createvlaniprange due to invalid value. Invalid parameter domainid value=undefined due to incorrect long value format, or entity does not exist or due to incorrect parameter annotation for the field in api cmd class.
Fixes: #3485
Fixes#3321
This changes removes exception throwing while associating an IP address to a new isolated network which is in Allocated state. And it allows disassociating an IP address when it is used for source NAT purpose but network is in allocated state.
Signed-off-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Currently an admin can choose which host a VM is to be started on.
They should be able to 'override' the allocation algorthm to a greater
or lesser extent at will, and be able to choose the pod, cluster or host
that they wish a new VM to be deployed in.
DeployVirtualMachine API has been extended with additional, optional
parameters podid and clusterid that will be passed to and used in the
deployment planner, when selecting a viable host. If the user supplies
a pod, a suitable host in the given pod will be selected. If the user
supplies a cluster, a suitable host in the given cluster will be selected.
Based on the parameter supplied and on passing validation, the VM will
then be deployed on the selected host, cluster or pod.
This change addresses #3089. There was an issue when disks were being added with bus type IDE when creating windows VMs from ISOs. It is not possible to select bus type when creating a VM with an ISO. The bus type is inferred based on the platform emulator string provided to the KVM agent. Currently when creating a VM with managed storage (ex: Solidfire) and OS type string Windows*, all disks are added as IDE. Qemu currently does not support multiple IDE controllers and this configuration results in VMs that cannot be started. This issue does not occur when using NFS as the storage provider due to logic in that KVM agent that makes all data volumes (non root) use a virtio controller for file based disk. Similar logic was added for raw physical disks so that managed storage has the same behavior as NFS. In addition specific versions were removed from the code that guesses the disk controller to be used based on the platform emulator string since most modern operating systems support virtio.
Fixes#3089
Removed the download icon when a template is not extractable.
Modified the api to allow a user from the same account as the template, to change the extractable attribute on the template.
Fixes#3400
The implementation of GenericBaseDao#searchAndCount() can result in
incorrect count. This happens because the implementation of the
GenericBaseDao#getCount method excludes the groupBy components of the
search queries. This means the count returned will always be larger than
the actual count when not considering pagination.
The change was brought in b0ce8fd which also fails to explain the rationale.
Further investigation of the getCount usage reveal they are always
accompanied by search queries which include groupBy components via
GenericBaseDao#searchIncludingRemoved method.
```
Current code diff between search and count methods is as follows -
diff --git a/framework/db/src/main/java/com/cloud/uddtils/db/GenericDaoBase.java b/framework/db/src/main/java/com/cloud/utils/db/GenericDaoBase.java
@@ -371,7 +371,7 @@ public abstract class GenericDaoBase<T, ID extends Serializable> extends Compone
clause = null;
}
- final StringBuilder str = createPartialSelectSql(sc, clause != null, enableQueryCache);
+ final StringBuilder str = createCountSelect(sc, clause != null);
@@ -384,19 +384,12 @@ public abstract class GenericDaoBase<T, ID extends Serializable> extends Compone
}
}
- List<Object> groupByValues = addGroupBy(str, sc);
- addFilter(str, filter);
-
+ // we have to disable group by in getting count, since count for groupBy clause will be different.
+ //List<Object> groupByValues = addGroupBy(str, sc);
final TransactionLegacy txn = TransactionLegacy.currentTxn();
- if (lock != null) {
- assert (txn.dbTxnStarted() == true) : "As nice as I can here now....how do you lock when there's no DB transaction? Review your db 101 course from college.";
- str.append(lock ? FOR_UPDATE_CLAUSE : SHARE_MODE_CLAUSE);
- }
-
@@ -410,20 +403,19 @@ public abstract class GenericDaoBase<T, ID extends Serializable> extends Compone
+ /*
if (groupByValues != null) {
for (Object value : groupByValues) {
pstmt.setObject(i++, value);
}
}
+ */
- if (s_logger.isDebugEnabled() && lock != null) {
- txn.registerLock(pstmt.toString());
- }
final ResultSet rs = pstmt.executeQuery();
while (rs.next()) {
- result.add(toEntityBean(rs, cache));
+ return rs.getInt(1);
}
- return result;
+ return 0;
--
2.17.1
```
The fix is to update the way we setup query for counting with group by
params.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR partially fixes the logic around port forwarding rules on the Juniper SRX plugin. The code in the plugin is based on JunOS 10, which is very old. The changes here should not break compatibility, but should enable the plugin to be used on newer devices. Note that an additional change to a script file is required to be able to add port forwarding rules, but as this PR was targetted for 4.11.3, I thought it best not to include this change as it might break compatibility for anyone still using JunOS 10.
I've made the logic better and consistent for adding/removing static nat and port forwarding rules - these were multi-step processes which did not check each individual step. This would aid in manually fixing rules in case of further problems.
I've also improved the logging for communication with the SRX by stripping out the Apache header before sending it, and indicating the name of the template filename in use.
To be able to add port forwarding rules, the <dst-port> tags in dest-nat-rule-add.xml must be changed to <low>.
Fixes: #3379
Support copy tags from template/iso image to VM from deploy vm command. Allow creation of tags from the source template/iso image to vm when deploy vm command creates virtual machine.
Fixes: #3048
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
If there are many projects and accounts, listing projects/accounts will take long time getting the resource limitation and resource count in the process. However resource count/limitation are not needed sometimes.
Add an option 'details' to listProjects and listAccounts. If you do not need the resource count/limitation, please add details=min to api call. The api execution time will be reduced significantly.
Adds functionality to sort the data that is available on each in the deploy VM wizard's step by their suitable fields:
affinityGroups by name
sshkeyPairs by name
vpcs by name
Fixes: #3050
If projects have many resource tags, it will take a long time to list projects.
Remove resource tags information from project_view will fix it the issue.
Fixes#3178
Java methods getInterfaceAddresses() returns ip addresses in reverse order as "ip addr show"
If there are multiple IPs assigned to a management interface, the last ip will be used as management ip in cloudstack. We need to reverse the ip addresses to get the first ip that makes more sense.
Fixes#3311
Current master has sorting broken and the order reverses as opposed to
what is set if sortkey.algorithm is set to true. The problem lies in the
way the update APIs were being called by the UI. The code was agnostic
to a global config that backend uses to set the order of the entities
in the corresponding list APIs.
We need to make UI aware of the global config and instead of changing
sign of sort key pass proper numbers so that DB isn't confusing when
some tables have positive sortkey and some have negative.
The fix is in 2 steps-
1) Make use of sortkey name in place where it's relevant. Mere row index
is not sufficient.
2) Reverse the sortkey if we are sorting by descending (when global
config is false)
