The labeling was broken. Only labels assigned at zone creation
were used, changing labels was not working. Tested with changing
a label and checking it.
As a bonus fixed the consistency of KVM in Dutch compared to other
traffic labels in dutch and copied in the OVM3 translated label
in other languages.
CLOUDSTACK-8821: UI Change while configuring firewall rule.It provides appropriate message in the UI when configuring the firewall rules in Network page.
If the default egress policy is allow, then it says to block traffic. If the default egress policy is deny, then it says to allow traffic.
* pr/791:
CLOUDSTACK-8821: Provide appropriate message in the UI when configuring the Firewall rules.
Signed-off-by: Daan Hoogland <daan@onecht.net>
Cloudstack:8647 LDAP Trust AD and AutoimportToday, CloudStack can automatically import LDAP users based on the configuration to a domain or an account. However, any new users in LDAP aren't automatically reflected. The admin has to manually import them again.
This feature enables admin to map LDAP group/OU to a CloudStack domain and any changes are reflected in ACS as well.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/WIP%3A+LDAP%3A+Trust+AD+and+Auto+Import
testcases output:
```
-------------------------------------------------------
T E S T S
-------------------------------------------------------
Running groovy.org.apache.cloudstack.ldap.NoLdapUserMatchingQueryExceptionSpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.216 sec - in groovy.org.apache.cloudstack.ldap.NoLdapUserMatchingQueryExceptionSpec
Running groovy.org.apache.cloudstack.ldap.LdapManagerImplSpec
log4j:WARN No appenders could be found for logger (org.apache.cloudstack.ldap.LdapManagerImpl).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more info.
using type:
using type: null
using type: TEST
using type: TEST TEST
using name:
using name: null
using accountType: -1
using accountType: 1
using accountType: 3
using accountType: 4
using accountType: 5
using accountType: 6
using accountType: 20000
using accountType: -500000
Tests run: 29, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.387 sec - in groovy.org.apache.cloudstack.ldap.LdapManagerImplSpec
Running groovy.org.apache.cloudstack.ldap.LdapListUsersCmdSpec
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.041 sec - in groovy.org.apache.cloudstack.ldap.LdapListUsersCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapAddConfigurationCmdSpec
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.019 sec - in groovy.org.apache.cloudstack.ldap.LdapAddConfigurationCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapUserSpec
Tests run: 9, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.021 sec - in groovy.org.apache.cloudstack.ldap.LdapUserSpec
Running groovy.org.apache.cloudstack.ldap.LdapAuthenticatorSpec
Tests run: 10, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.082 sec - in groovy.org.apache.cloudstack.ldap.LdapAuthenticatorSpec
Running groovy.org.apache.cloudstack.ldap.LdapConfigurationVOSpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.004 sec - in groovy.org.apache.cloudstack.ldap.LdapConfigurationVOSpec
Running groovy.org.apache.cloudstack.ldap.OpenLdapUserManagerSpec
Tests run: 12, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.094 sec - in groovy.org.apache.cloudstack.ldap.OpenLdapUserManagerSpec
Running groovy.org.apache.cloudstack.ldap.LdapDeleteConfigurationCmdSpec
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.008 sec - in groovy.org.apache.cloudstack.ldap.LdapDeleteConfigurationCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapUserResponseSpec
Tests run: 7, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.01 sec - in groovy.org.apache.cloudstack.ldap.LdapUserResponseSpec
Running groovy.org.apache.cloudstack.ldap.LdapUserManagerFactorySpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.027 sec - in groovy.org.apache.cloudstack.ldap.LdapUserManagerFactorySpec
Running groovy.org.apache.cloudstack.ldap.ADLdapUserManagerImplSpec
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.012 sec - in groovy.org.apache.cloudstack.ldap.ADLdapUserManagerImplSpec
Running groovy.org.apache.cloudstack.ldap.LdapCreateAccountCmdSpec
Tests run: 11, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.168 sec - in groovy.org.apache.cloudstack.ldap.LdapCreateAccountCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapImportUsersCmdSpec
Tests run: 9, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.063 sec - in groovy.org.apache.cloudstack.ldap.LdapImportUsersCmdSpec
Running groovy.org.apache.cloudstack.ldap.LinkDomainToLdapCmdSpec
Tests run: 5, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.019 sec - in groovy.org.apache.cloudstack.ldap.LinkDomainToLdapCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapSearchUserCmdSpec
Tests run: 4, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.011 sec - in groovy.org.apache.cloudstack.ldap.LdapSearchUserCmdSpec
Running groovy.org.apache.cloudstack.ldap.LdapListConfigurationCmdSpec
Tests run: 6, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.01 sec - in groovy.org.apache.cloudstack.ldap.LdapListConfigurationCmdSpec
Running groovy.org.apache.cloudstack.ldap.NoSuchLdapUserExceptionSpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.005 sec - in groovy.org.apache.cloudstack.ldap.NoSuchLdapUserExceptionSpec
Running groovy.org.apache.cloudstack.ldap.LdapConfigurationResponseSpec
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.006 sec - in groovy.org.apache.cloudstack.ldap.LdapConfigurationResponseSpec
Running groovy.org.apache.cloudstack.ldap.LdapConfigurationSpec
asserting for provider configuration: openldap
asserting for provider configuration: microsoftad
asserting for provider configuration:
asserting for provider configuration:
asserting for provider configuration: xyz
asserting for provider configuration: MicrosoftAd
asserting for provider configuration: OpenLdap
asserting for provider configuration: MicrosoftAD
Tests run: 19, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.053 sec - in groovy.org.apache.cloudstack.ldap.LdapConfigurationSpec
Running groovy.org.apache.cloudstack.ldap.LdapContextFactorySpec
Tests run: 5, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.099 sec - in groovy.org.apache.cloudstack.ldap.LdapContextFactorySpec
Running groovy.org.apache.cloudstack.ldap.LdapConfigurationDaoImplSpec
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.027 sec - in groovy.org.apache.cloudstack.ldap.LdapConfigurationDaoImplSpec
Running groovy.org.apache.cloudstack.ldap.LdapUtilsSpec
Tests run: 3, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.01 sec - in groovy.org.apache.cloudstack.ldap.LdapUtilsSpec
Results :
Tests run: 156, Failures: 0, Errors: 0, Skipped: 0
```
* pr/755:
CLOUDSTACK-8647: linkdomaintoldap shouldnt fail when createuseraccount fails
CLOUDSTACK-8647 removed duplicate key in create sql of ldap_trust_map
CLOUDSTACK-8647: string formatting
CLOUDSTACK-8647: updated with review comments
CLOUDSTACK-8647: unittests for LdapAuthenticatorSpec
CLOUDSTACK-8647: formatted LdapAuthenticatorSpec
CLOUDSTACK-8647: UI for trust AD feature
CLOUDSTACK-8647 added unittests for new methods in ldapmanager
CLOUDSTACK-8647 unittests for LinkDomainToLdap api command
CLOUDSTACK-8647: fixed unittests
CLOUDSTACK-8647 support for assigning and admin to linked ldap domain
CLOUDSTACK-8647 added nested group enabled config in ldap
CLOUDSTACK-8647 added account_type to the linkDomainToLdap API
CLOUDSTACK-8647 changed the authentication flow
CLOUDSTACK-8647 added new api linkLdapToDomain
CLOUDSTACK-8647: added cmd and response class for the new api
Signed-off-by: Rajani Karuturi <rajani.karuturi@citrix.com>
- l10n for the SSH Key Pairs behavior
- l10n for Autoscaling / LB sections
- l10n for Reset password
- l10n on some strings for the installation Wizard
- l10n on some strings in VPN/VPC section
- l10n on Service offerings sections
- improve some FR translations
- on new functionnality: upload volume/template from Local
- on the zone configuration wizard for the "Next" button
- update French messages properties from transifex
- Improve some French translations ("Téléverser" for "Upload")
* Move config options to SAML plugin
This moves all configuration options from Config.java to SAML auth manager. This
allows us to use the config framework.
* Make SAML2UserAuthenticator validate SAML token in httprequest
* Make logout API use ConfigKeys defined in saml auth manager
* Before doing SAML auth, cleanup local states and cookies
* Fix configurations in 4.5.1 to 4.5.2 upgrade path
* Fail if idp has no sso URL defined
* Add a default set of SAML SP cert for testing purposes
Now to enable and use saml, one needs to do a deploydb-saml after doing a deploydb
* UI remembers login selections, IDP server
- CLOUDSTACK-8458:
* On UI show dropdown list of discovered IdPs
* Support SAML Federation, where there may be more than one IdP
- New datastructure to hold metadata of SP or IdP
- Recursive processing of IdP metadata
- Fix login/logout APIs to get new interface and metadata data structure
- Add org/contact information to metadata
- Add new API: listIdps that returns list of all discovered IdPs
- Refactor and cleanup code and tests
- CLOUDSTACK-8459:
* Add HTTP-POST binding to SP metadata
* Authn requests must use either HTTP POST/Artifact binding
- CLOUDSTACK-8461:
* Use unspecified x509 cert as a fallback encryption/signing key
In case a IDP's metadata does not clearly say if their certificates need to be
used as signing or encryption and we don't find that, fallback to use the
unspecified key itself.
- CLOUDSTACK-8462:
* SAML Auth plugin should not do authorization
This removes logic to create user if they don't exist. This strictly now
assumes that users have been already created/imported/authorized by admins.
As per SAML v2.0 spec section 4.1.2, the SP provider should create authn requests using
either HTTP POST or HTTP Artifact binding to transfer the message through a
user agent (browser in our case). The use of HTTP Redirect was one of the reasons
why this plugin failed to work for some IdP servers that enforce this.
* Add new User Source
By reusing the source field, we can find if a user has been SAML enabled or not.
The limitation is that, once say a user is imported by LDAP and then SAML
enabled - they won't be able to use LDAP for authentication
* UI should allow users to pass in domain they want to log into, though it is
optional and needed only when a user has accounts across domains with same
username and authorized IDP server
* SAML users need to be authorized before they can authenticate
- New column entity to track saml entity id for a user
- Reusing source column to check if user is saml enabled or not
- Add new source types, saml2 and saml2disabled
- New table saml_token to solve the issue of multiple users across domains and
to enforce security by tracking authn token and checking the samlresponse for
the tokens
- Implement API: authorizeSamlSso to enable/disable saml authentication for a
user
- Stubs to implement saml token flushing/expiry
- CLOUDSTACK-8463:
* Use username attribute specified in global setting
Use username attribute defined by admin from a global setting
In case of encrypted assertion/attributes:
- Decrypt them
- Check signature if provided to check authenticity of message using IdP's
public key and SP's private key
- Loop through attributes to find the username
- CLOUDSTACK-8538:
* Add new global config for SAML request sig algorithm
- CLOUDSTACK-8539:
* Add metadata refresh timer task and token expiring
- Fix domain path and save it to saml_tokens
- Expire hour old saml tokens
- Refresh metadata based on timer task
- Fix unit tests
This closes#489
(cherry picked from commit 20ce346f3acb794b08a51841bab2188d426bf7dc)
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Conflicts:
client/WEB-INF/classes/resources/messages_hu.properties
plugins/hypervisors/xenserver/src/com/cloud/hypervisor/xenserver/resource/wrapper/xenbase/CitrixCheckHealthCommandWrapper.java
plugins/user-authenticators/saml2/src/org/apache/cloudstack/api/command/SAML2LoginAPIAuthenticatorCmd.java
ui/scripts/ui-custom/login.js
1. provide compatibility with the Big Cloud Fabric (BCF) controller
L2 Connectivity Service in both VPC and non-VPC modes
2. virtual network terminology updates: VNS --> BCF_SEGMENT
3. uses HTTPS with trust-always certificate handling
4. topology sync support with BCF controller
5. support multiple (two) BCF controllers with HA
6. support VM migration
7. support Firewall, Static NAT, and Source NAT with NAT enabled option
8. add VifDriver for Indigo Virtual Switch (IVS)
This closes#151
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Customise the messages showed during VPC restart based on redundancy
Do not show "Make Redundant" option if VPC is already redundant
Show on VPC details if a VPC is redundant
This is a plugin that puts in ovm3 support ranging from 3.3.1 to 3.3.2. Basic
functionality is in here, advanced networking etc..
Snapshots only work when a VM is stopped now due to the semantics of OVM's raw
image implementation (so snapshots should work on a storage level underneath the
hypervisor shrug)
This closes#113
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
