* CKS: add ConfigDrive to cloud-init datasource_list in systemvm template
* systemvm template: update debian 11.7.0 iso url
* CKS: get K8S iso by LABEL=CDROM if config drive ISO is attached
* Revert "CKS: add ConfigDrive to cloud-init datasource_list in systemvm template"
This reverts commit b6863a5ce1b9757d7c5bbf3ba9720e2b61410c7d.
* CKS: patch cloud-init in opt/cloud/bin/setup/cksnode.sh
* PR7650: move ConfigDrive before CloudStack in datasource list
* Revert "CKS: patch cloud-init in opt/cloud/bin/setup/cksnode.sh"
This reverts commit 75be03c6aaf58e3939f59c657d84c6495538d3c2.
* CKS: fix ConfigDrive
* Prevent addition of duplicate PF rules on scale up and no rules left behind on scale down (#32)
* fix missing dependency injection
* NSX: Fix concurrency issues on port forwarding rules deletion (#37)
* Fix concurrency issues on port forwarding rules deletion
* Refactor objectExists
* Fix unit test
* Fix test
* Small fixes
* CKS: Externalize control and worker node setup wait time and installation attempts (#38)
* NSX: Add shared network support (#41)
* NSX: Fix number of physical networks for Guest traffic checks and leftover rules on CKS cluster deletion (#45)
* Fix pf rules removal on CKS cluster deletion
* Fix check for number of physical networks for guest traffic
* Fix unit test
* fix logger
* NSX: Handle CheckHealthCommand to avoid host disconnection and errors on APIs
* NSX: Handle CheckHealthCommand to avoid host disconnection and errors on APIs
* Remove unused string
* fix logger
* Update UDP active monitor to ICMP
* Fix NPE on restarting VPC with additional public IPs
* NSX / VPC: Reuse Source NAT IP from systemVM range on restarts
* CKS: Public IP not found for VPC networks
* Externalize retries and inverval for NSX segment deletion (#67)
* remove unused import
* remove duplicate imports
* remove unused import
* revert externalizing cks settings
* fix test
* Refactor log messages
* Address comments
* Fix issue caused due to forward merge: 90fe1d
---------
Co-authored-by: Nicolas Vazquez <nicovazquez90@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces the multi-arch zones, allowing users to select the VM arch upon deployment.
Multi-arch zone support in CloudStack can allow admins to mix x86_64 & arm64 hosts within the same zone with the following changes proposed:
- All hosts in a clusters need to be homogenous, wrt host CPU type (amd64 vs arm64) and hypevisor
- Arch-aware templates & ISOs:
- Add support for a new arch field (default set of: amd64 and arm64), when unspecified defaults to amd64 and for existing templates & iso
- Allow admins to edit the arch type of the registered template & iso
- Arch-aware clusters and host:
- Add new attribute field for cluster and hosts (kvm host agents can automatically report this, arch of the first host of the cluster is cluster's architecture), defaults to amd64 when not specified
- Allow admins to edit the arch of an existing cluster
- VM deployment form (UI):
- In a multi-arch zone/env, the VM deployment form can allow some kind of template/iso filtration in the UI
- Users should be able to select arch: amd64 & arm64; but this is shown only in a multi-arch zone (env)
- VM orchestration and lifecycle operations:
- Use of VM/template's arch to correctly decide where to provision the VM (on the correct strictly arch-matching host/clusters) & other lifecycle operations (such as migration from/to arch-matching hosts)
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This PR contains 3 features
- IPv4 Static Routing (Routed mode) #9346
Design document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=306153967
- AS Numbers Management #9410
Design Document: https://cwiki.apache.org/confluence/display/CLOUDSTACK/BGP+AS+Numbers+Management
- Dynamic routing
Design Document: https://cwiki.apache.org/confluence/pages/viewpage.action?pageId=315492858
- Document: https://github.com/apache/cloudstack-documentation/pull/419
Rename nsx mode to routing mode
by
```
git grep -l nsx_mode |xargs sed -i "s/nsx_mode/routing_mode/g"
git grep -l nsxmode |xargs sed -i "s/nsxmode/routingmode/g"
git grep -l nsxMode |xargs sed -i "s/nsxMode/routingMode/g"
git grep -l NsxMode |xargs sed -i "s/NsxMode/RoutingMode/g"
```
- re-organize sql changes
- fix NPE as rules do not have public ip
- fix missing destination cidr in ingress rules
- disable network usage for routed network
- fix DB exception as network_id is -1 during network creation
- apply ingress/egress routing rules
- VR changes to configure nft rules for isolated network
- VR: setup nft rule for control network
- VR: flush all iptables rules
- fix NPE which is because ingress rules do not have public ip associated
- fix dest cidr is missing in nft tables
- add ip4 routing and ip4 routes to list network and list vpc response
- fix ingress rule is missing when vr is restarted
- fix icmp types in nft rules
- add tab to manage routing firewall rules
- fix ingress rules are not applied when VR is restarted
- add default rules in FORWARD chain
- fix create vpc offerings
- fix public ip is not assigned to vpc
- fix network offering is not listed when create vpc tier
- add is_routing to boot args of vpc vr
- remove table ip4_firewall in vpc vr
- release or remove subnet when remove a network
- implemenent fw_vpcrouter_routing
- fix wrong ip familty when flush ipv4 rules
- fix acl rules are not applied due to wrong version (should be 6 which means ip6 rules are removed)
- add default rules for vpc tiers so that tcp connections (e.g. ssh) work
- append policy rules after default rules
- remove /usr/local/cloud/systemvm/ in routers
- throw an exception when allocate subnet with cidrsize
- fix some TODOs
- add new parameters to update API
- return type Ipv4GuestSubnetNetworkMap when get or create subnet
- fix firewall rules are broken
- add domain_id and account_id to db
- add domain/account/project to ipv4 subnet response
- create ipv4 subnet for domain/account/project
- check conflict when update ipv4 subnet
- ui changes
- add parent subnet to response
- add list for ipv4 subnet
- implement some methods
- fix list subnets for guest networks by zoneid
- UI changes
- fix delete ipv4 subnet for network
- fix ipv4 subnet is set to zone guest network cidr if cidrsize is specified
- add zone info to response if parent subnet is null but network is not
- fix gateway/cidr is not set when create network with cidrsize
- fix order of nft rules in the VRs
* Routed v24
- add classes in marvin base.py
* Routed v25
- add test_01_subnet_zone
- fix dedicate to domain/account failure
- list subnets for network by keyword and subnet
* Routed v26: implement subnet auto-allocation
- add utils for split ip ranges into small subnets
- add utils to get start/end ip of a cidr
- implement subnet auto-generation
- add global settings
* Routed 27: add subnet for VPC
- add db column for vpc_id
- add db record for vpc
- remove db record when delete a vpc
- add checkConflicts methods
- remove duplicated settings
- check ipv4 cidr when create subnet
* Routed v28: update smoke tests
- update test_ipv4_routing.py
- search subnets by networkid
* Routed 29: fix vpc and add more tests
- fix createnetwork in vpc
- add vpc id/name to response
- fix zone id/name are not displayed in some cases
- add smoke test for vpc
- add smoke tests for failed cases
- add smoke test for connectivity checks
- marvin: add "-q" to ssh command
* Routed 31: ui and smoke tests
- UI: add link to network in list view
- add nftables rules check in VRs
* Routed 32: add chain OUTPUT and more rules
- fix the issue 80/443/8080 is not reachable from VR itself
```
2024-06-27 10:21:52,121 INFO Executing: systemctl start cloud-password-server@172.31.1.1
2024-06-27 10:21:52,128 INFO Service cloud-password-server@172.31.1.1 start
2024-06-27 10:21:52,129 INFO Executing: ps aux
2024-06-27 10:24:02,175 ERROR Failed to update password server due to: <urlopen error [Errno 110] Connection timed out>
```
* Routed: fix dns search from VMs in Isolated networks
* Routed: fix VPC dns issue due to gateway IP is missing in cloud.conf
This is caused by NSX integration, and fixed by
https://github.com/apache/cloudstack/pull/9102/
* Routed: rename routing_mode to network_mode
* Routed: replace centos5.5 template in smoke test as dhclient does not work in the vms
// this does not work
refer to https://dominikrys.com/posts/disable-udp-checksum-validation/#ignoring-udp-checksums-with-nftables
and
https://forum.openwrt.org/t/udp-checksum-with-nftables/161522/11
the vm should have checksum offloading disabled
* Routed: fix smoke test due to wrong cidrlist of egress rules and missing ingress rule from VR
* PR 9346: fix lint error schema-41910to42000.sql
* PR 9346: ui polish v1
* PR 9346: create VPC with cidrsize
* Routed: fix test failures with test_network_ipv6 and test_vpc_ipv6 due to 'ssh -q'
* Routed: fix /usr/local/cloud/systemvm/ are removed after SSVM/CPVM reboot
* Routed: fix IP of additional nics of VPC VR is not gateway
* PR 9346: fix cidrsize check when create VPC with cidrsize
* Routed: fix test/integration/smoke/test_ipv4_routing.py:279:16: E713 test for membership should be 'not in'
* PR9346: fix/Update api
* PR 9346: set response object name
* PR9346: UI refactor and small fixes
* PR9346: change return type of getNetworkMode
* PR9346: move IPv4 subnet to seperated tab
* PR9346: revert IpRangesTabGuest.vue back to original
* PR9346: fix remove ipv4 subnet on UI
* PR9346: fix test_ipv4_routing.py
* AS Number Range Management
* Create AS Number Range for a Zone
* Fix build
* Add ListASNRange and fix create ASN range
* Add List AS numbers
* Add UI for AS Numbers
* Fix UI and filter AS Numbers
* Add AS Number on Isolated network creation and refactor UI and response
* Release AS Number
* Add network offering new columns
* Add UI support to view and add AS number and configure network offering
* Automatically assign AS Number if not specify AS number
* update variable name
* Fix routing mode check
* UI: Only allow selecting AS number when routing mode is Dynamic and specifyAsNumber is true
* UI: Only pass AS number when supported by the network offering
* Release AS number on network deletion
* Add deleteASNRange command (#81)
* API: List ASNumbers by asnumber (#83)
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* AS number management extensions
* Support AS number on VPC tier creation based on the offering
* Fix delete AS Range
* Fix UI values
* UI: Minor fix for releasing AS number
* UI: Move management of AS Range to Zone details view
* Fix specify_as_number column in network_offering table to set the default false
* Add events for AS number operations
* Allow users to list AS Numbers and fix network form for Normal users
* Add AS number details to list networks response
* Fix Allocated time format
* Fix Allocated time format
* support in details view too
* Fix: Do not release AS number if acquired network requires AS number
* Fix: Do not release AS number if acquired network requires AS number
* Fix typo
* Fix allocated release
* Fix event type
* UI: Add Routing mode and Specify AS to the network offering details
* UI: Add Routing mode and Specify AS to the network offering details
* Address comment
* Fix release AS number of network deletion
* Fix release AS number of network deletion
* Fix
* Restore release to its place based on the boolean
* Rename boolean
* API: Add networkId as listASNumber parameter
* Add Network name to the search view filter for AS numbers
* Present allocated time in human readable format - Pubilc IP / AS Numbers
* Add account / domain filter for AS numbers
* Add support for AS numbers on VPC offerings
* Refactor AS number allocation to VPC and non VPC isolated networks
* Checkstyle
* Add support for AS numbers on VPC offerings
* extend vpc offering view and vpcoffering response
* merge https://github.com/shapeblue/cloudstack-playtika/pull/115 and change network_id of as_numbers to include vpc_id
* Display AS number of VPC tiers as the AS number of the VPC
* extend asnumber response and ui support
* improve UI and as number response to view VPC details
* List only dynamic offerings for vpc tiers with specify as numbers
* Fix release AS number
* Fix AS number displayed as 0 when no AS number assigned
* Fix VPC offering creation without specify AS
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix release AS number on VPC deletion
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Update server/src/main/java/com/cloud/dc/BGPServiceImpl.java
* Fix missing column on asnumber table
* Fix listASNumbers API to support vpcid and obtain AS number from vpc for tiers
* Prevent listing 0 AS number for VPC
* Fix create Isolated Network form
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Update server/src/main/java/com/cloud/network/vpc/VpcManagerImpl.java
* Dynamic: move routingmode/specifyasn after networkmode in AddNetworkOffering.vue on UI
* Dynamic: fix ip4routing in network response
* Dynamic/systemvm: add FRR to systemvm template
* Dynamic: BGP peers (DB,VO,Dao)
* Dynamic: BGP peers (VR/server)
* Dynamic: v3
- remove BgpPeer class
- fix vpc vr has bgp peers of only 1 tier
- rename ip4_cidr to guest_ip4_cidr
- rename ip6_cidr to guest_ip6_cidr
- generate /etc/frr/frr.conf
- apply BGP peers on Dynamic-Routed network even if there is no BGP peers
* Dynamic v4: fix vpc vr
- fix duplicated guest cidr in frr.conf in vpc vr
todo
- restart frr / reload frr (reload will cause bgp session to Policy state)
- apis for bgp peers
- assign/release bgp peer from/to network
* Dynamic v5: add apis for bgp peers
* Dynamic v6: fix bugs
- set response object name
- remove required as number when update
- fix checks when update
- allow regular users to list bgp peers
* Dynamic v7: move apis to bgp sub-dir
* Dynamic v8: add tab for manage BGP peers on UI
* Dynamic v9: fix update bgp with same config
* Dynamiv v10: add changeBgpPeersForNetworkCmd
* Dynamic v11: create network with bgppeerids
- create network with bgppeerids
- add marvin classes
- add smoke tests
- remove uuid from bgp_peer_network_map
- fix created/removed in bgp_peer_network_map
- remove bgppeers when remove a network
- UI: fix delete bgp peer
* Dynamic v12: add test for vpc tiers
* Dynamic v13: bug fixes
- fix change BGP peers for network in Allocated state
- fix listing network returns removed record
- fix all vpc tiers have the same settings
- remove BGP peers as part of network removal
- remove FRR settings for vpc tiers without any BGP peers
- UI: fix no error msg when change BGP peers
* Dynamic v14: assign BGP Peers for VPC instead of VPC tiers
- create vpc with bgppeerids
- do not allow create/update vpc tier with bgppeerids
- apply all bgp peers when create/delete a vpc tier
- UI: change bgp peers for vpc
- test: update tests on vpc
* Dynamic: fix build errors after merging as number PR
* Dynamic: fix TODOs
* Dynamic: fix smoke test on VPC
* Allow creation of networks by users with as numbers
* Address review comments
* Move BGPService to bgp package and inject it on BaseCmd
* Revert changes for CKS and address more comments
* Display left side menu option for AS number only for root admin
* Dynamic: create/update BGP peer with details
refer to https://docs.frrouting.org/en/latest/bgp.html
* Dynamic: fix build error and remove access to ListBgpPeers cmd for regular users
* Dynamic: assign all zone BGP peers to user networks
* Dynamic: show BGP peer info of networks only for root admin
* AS number: disable specifyasnumber for non-NSX offerings
* Dynamic: pass bgppeer details to command and fix typo with ip6 addr
* Dynamic: list BGP peers by isdedicated, and fix change bgppeers for network/vpc
* Dynamic: add UI labels
* Dynamic: add bgp peers to vpc response
* Dynamic: list bgp peers by keyword, fix list by asnumber
* Dynamic: fix list bgppeers by keyword and db schema
* Dynamic: fix list bgppeers do not return dedicated peers
* Dynamic: update UI when create network/vpc offering
* Update server/src/main/java/com/cloud/configuration/ConfigurationManagerImpl.java
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
* Update tools/marvin/setup.py
* Dynamic: network mode must be same when update a network with new offering
* Dynamic: add method networkModel.isAnyServiceSupportedInNetwork
* Dynamic: rename APIs and classes
* Dynamic: fix unit tests due to previous changes
* Dynamic: validateNetworkCidrSize when auto-create subnet
* Dynamic: check AS number overlap
* Dynamic: add ActionEvent
* Dynamic: small code optimization
* Dynamic: fix ui bugs after api rename
* Dynamic: add marvin and test for ASN ranges and AS numbers
* Dynamic: add account setting use.system.bgp.peers
also
- change the default value of routed.ipv4.vpc.max.cidr.size and routed.ipv4.vpc.min.cidr.size
- change the category of settings
* static: fix ui error when delete zone ipv4 subnets
* static: small UI polish
* Dynamic: throw exception when as number is required but not passed
* Dynamic: fix typo when create FRR directory which causes network deletion failures
* Dynamic: connect to ALL (or ALL dedicated) BGP peers if no BGP peer mapping for the network/vpc
* Dynamic: throw exception when as number is required for VPC but not passed
* Dynamic: list bgp peers by useSystemBgpPeers
* Dynamic: fix frr config in VPC VR when change bgp peers
* Dynamic: create frr config even if there is no VPC tiers
* Dynamic: list bgp peers by zoneid (required for account) and account
* Dynamic: only apply FRR config for vpc tiers with dynamic routing
* Dynamic: donot send commands to router if commands size is 0
* Dynamic: fix 'new IPv6 address is not valid' when update bgp peer without IPv6
* Dynamic: throw exception if fail to allocate AS number when create network/vpc with dynamic routing
* Dynamic: enable ipv6 unicast and 'ip nht resolve-via-default'
* Dynamic: delete network/vpc if fail to allocate AS number when create network/vpc with dynamic routing
* test: add unit tests for ASN APIs
* test: add unit tests for core module
* test: add unit tests for API responses
* test: add unit tests for BgpPeerTO
* test: add minor changes
* test: add tests for create/delete/update/list RoutingFirewallRuleCmd
* Static: show ip4 routes for vpc tiers
* test: fix smoke test failure caused by type change of as number
* test: add test for Ipv4SubnetForZoneCmd
* test: add test for Ipv4SubnetForGuestNetworkCmd and BgpPeerCmd
* UI: do not show redundant router when network mode is ROUTED as RVR is not supported
* UI: hide 'Conserve mode' when networkmode is ROUTED
* test: add unit tests for ListASNumbersCmdTest
* Static: remove allocated IPv4 subnet when delete a network or vpc
* test: add unit tests for BgpPeersRules
* Dynamic: set ipv4routing from network offering
* server: list as numbers and ipv4 subnets by keyword
* server: remove dedicated bgp peers and ipv4 subnets when delete an account or domain
* server: fix dedicated ipv4 subnet is allocated to other accounts
* UI: fix allocated time format
* server: ignore project is projectid is -1 so bgppeers/ipv4subnets works in project view
* UI: add project column to bgp peers and ipv4 subnets
* server: fix list AS numbers by domain admin or normal user
* server: fix network creation when ipv4 subnet is dedicated
* UI: polish network.js
* Dynamic: fix frr config for ipv6 routing
* Static routing: support cks cluster
* Static: get/create IPv4 subnet from dedicated subnets at first
* Dynamic: add BGP peers tab
* Static: remove redundant loops
* api: add since to api and response
* server: add unit tests
---------
Co-authored-by: Nicolas Vazquez <nicovazquez90@gmail.com>
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
Co-authored-by: Harikrishna Patnala <harikrishna.patnala@gmail.com>
Co-authored-by: Abhishek Kumar <abhishek.mrt22@gmail.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* NSX integration - skeletal code
* Fix module not loading on startup
* add upgrade path and daos
\n add nsx controller command
* add support for adding and listing nsx provider to a zone
* add license
* add default VPC offering and update upgrade path
* add global setting to enable nsx plugin
* add delete nsx controller operation
* add nsxresource
* add NSX resource , api client, create tier1 gw
* update db
* update response and add license
* Add support to create and delete nsx tier-1 gateway
* add license
* cleanup and add skeletal code for network creation
* add create/delete segment and UI integration
* add license
* address code smells - part 1
* fix test / build failure
* NSX integration - skeletal code
* Fix module not loading on startup
* add upgrade path and daos
\n add nsx controller command
* add support for adding and listing nsx provider to a zone
* add license
* add default VPC offering and update upgrade path
* add global setting to enable nsx plugin
* add delete nsx controller operation
* add nsxresource
* add NSX resource , api client, create tier1 gw
* update db
* update response and add license
* Add support to create and delete nsx tier-1 gateway
* add license
* cleanup and add skeletal code for network creation
* add create/delete segment and UI integration
* add license
* address code smells - part 1
* fix test / build failure
* add ui changes + update nsx_provider table transport zones + use NSX broadcast domain for add nics to router
* ui: fix password field, and backend changes
* add route advertisement
* update offering
* update offering
* add sleep before deletion of vpc / tier g/w for ports to be removed
* move creation of segments to design phase
* change provider to VPC router for Dhcp & dns service in an nsx offering
* Add public nic for NSX
* reserve first IP (after g/w) of subnet for router nic - NSX
* revert reserving 1st IP in vpc segments
* [NSX] Create a DHCP relay and add it to a VPC tier segment (#107)
* Create DHCP relay command and execute request
* In progress integrate with networking
* Create DHCP relay config on the network VR allocation
* Revert domain router dao changes
* Create DHCP relay con VR nic plug to NSX network
* Link DHCP relay config to segment after creation
* [NSX] Cleanup DHCP Relay config on segment deletion (#108)
* Cleanup DHCP Relay config on segment deletion
* update segment & relay name generators and call delete dhcprelay after deletion of segment
* address comment
* [NSX] Fix DHCP relay config deletion was missing zone name (#8068)
* [NSX] Refactor API wrapper operations (#8059)
* [NSX] Refactor API wrapper operations
* Big refactor
* Address review comment
* change network cidr to cidr to prevent NPE
* add domain and zone names to the various networks - vpc & tier
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* Nsx unit tests (#8090)
* Add tests
* add test for NsxGuestNetworkGuru
* add unit tests for NsxResource
* add unti tests for NsxElement
* cleanup
* [NSX] Refactor API wrapper operations
* update tests
* update tests - add nsxProviderServiceImpl test
* add unit test - NsxServiceImpl
* add license
* Big refactor
* Address review comment
* change network cidr to cidr to prevent NPE
* add domain and zone names to the various networks - vpc & tier
* fix tests
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* modify NSX resource naming convention (#8095)
* modify NSX resource naming convention
* remove unused imports
* add a setup phase between desgin and implementation of a network for intermediary steps
* add method to all classes
* NSX: Refactor Network & VPC offering (#8110)
* [NSX] Refactor API wrapper operations
* Network offering changes for NSX
* fix services and provider combination
* address comments: rename param
* update nsx_mode parameter
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* fix test
* [NSX] Allow NSX isolated networks (#8132)
* Add network offerings for NSX on isolated networks
* Fix offerings creation
* In progress NSX isolated network
* Fixes
* Fix NIC allocation to router
* NSX: Add Step for Adding Public traffic network for NSX During zone creation (#8126)
* NSX: Add Step for Adding Public traffic network for NSX
* address comments and cleanup
* address comment
* remove indent
* NSX: Create and Delete static NAT & Port forward rules (#8131)
* NSX: Create and delete NSX Static Nat rules
* fix issues with static nat
* add static nat
* Support to add and delete Port forward rules
* add license
* fix adding multiple pf rules
* cleanup
* fix lint check
* fix smoke tests
* fix smoke tests
* Nsx add lb rule (#8161)
* NSX: Create and delete NSX Static Nat rules
* fix issues with static nat
* add static nat
* Support to add and delete Port forward rules
* add license
* fix adding multiple pf rules
* cleanup
* NSX: Add support to create and delete Load balancer rules
* fix deletion of lb rules
* add header file and update protocol detail
* build failure fix
* [NSX] Add SNAT support (#8100)
* In progress add source NAT
* Fix after merge
* Fix tests
* Fix NPE on isolated network deletion
* Reserve source NAT IP when its not passed for NSX VPC
* Create source NAT rule on VR NIC allocation
* Fix update VPC and remove VPC to update and remove SNAT rule
* Fix packaging
* Address review comment
* Fix build
* fix build - unused import
* Add defensive checks
* Add missing design to NSX public guru
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* NSX: Fix VR public NIC allocation (#8166)
* NSX: fix LB member addition and deletion and add defensive checks (#8167)
* Fix public NIC NPE on broadcast URI
* NSX: Router Public nic to get IP from systemVM Ip range (#8172)
* NSX: Router Public nic to get IP from systemVM Ip range
* Fix VR IP address and setSourceNatIp command
* NSX: hide systemVM reserved IP range SourceNAT
* fix test
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* fix test failure
* test failure fix
* [NSX] Fix update source NAT IP (#8176)
* [NSX] Fix update source NAT IP
* Fix startup
* Fix API result
* NSX - add LB route Advertizement (#8192)
* [NSX] Add ACL types support (#8224)
* NSX: Create segment group on segment creation
* Add unit tests
* Remove group for segment before removing segment
* Create Distributed Firewall rules
* Remove distributed firewall policy on segment deletion
* Fix policy rule ID and add more unit tests
* Fix DROP action rules and transform tests
* Add new ACL rules
* Fixes
* associate security policies with groups and not to DFW and add deletion of rules
* Fix name convention
---------
Co-authored-by: Pearl Dsilva <pearl1594@gmail.com>
* NSX: Fix creation of VPCs (#8320)
* Fix ACL rules creation (#8323)
* [NSX] Fix database views (#8325)
* NSX: Add CKS Support & Firewall rules for Isolated Networks (#8189)
* NSX: Add ALL LB IP to the list of route advertisements in tier1
* NSX: Support Source NAT on NSX Isolated networks
* NSX: Cks Support
* NSX: Create segment group on segment creation
* Add unit tests
* Remove group for segment before removing segment
* Create Distributed Firewall rules
* Remove distributed firewall policy on segment deletion
* Fix policy rule ID and add more unit tests
* Add support for routed NSX Isolated networks \n and non RFC 1918 compliant IPs
* Add support for routed NSX Isolated networks \n and non RFC 1918 compliant IPs
* Add Firewall rules
* build failure - fix unit test
* fix npes
* Add support to delete firewall rules
* update nsx cks offering
* add license
* update order of ports in PF & FW rules
* fix filter for getting transport zones
* CKS support changed - MTU updated, etc
* add LB for CKS on VPC
* address comments
* adapt upstream cks logic for vpc
* rever mtu hack
* update UI changes as per upstream fix
* change display test for CKS n/w offerings for isolated and VPC tiers
* add extra line for linter
* address comment
* revert list change
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* fix ui build failure
* [NSX] Address SonarCloud Bugs (#8341)
* [NSX] Address SonarCloud Bugs
* Fix NSX API connection issues
* NSX: Add unit tests to increase coverage (#8355)
* NSX: Add unit tests
* cleanup unused imports
* add more unit tests
* add tests for publicnsxnetworkguru
* add license
* fix build failures
* address sonar comment
* fix security hotspots
* NSX: Add more unit tests (#8381)
* NSX : Unit tests
* remove unused imports
* remove unused import causing build failure
* fix build failures due to unused imports
* fix build failure
* fix test assertion
* remove unused imports
* remove unused import
* Nsx UI zone bug (#8398)
* NSX: Attempt to fix NSX Zone creation bug for public networks
* fix zone wizard public traffic issue
* add proper filtering of offerings based on VPC nsx mode
* clean up console logs
* NSX: Fix code smells and reported bugs (#8409)
* NSX: Fix code smells and reported bugs
* fox override issue
* remove unused imports
* fix test
* refactor code to reduce complexity
* add lisence
* cleanup
* fix build failure
* fix build failure
* address comments
* test - add config to ignore certain files from test coverage
* test exclusion of classes from test cov
* rever pom changes
* [NSX] Add more unit tests (#8431)
* [NSX] Add more unit tests
* More tests
* Fix build errors
* NSX: Prevent creation of L2 and Shared networks for NSX (#8463)
* NSX: Prevent creation of L2 and Shared networks for NSX
* add checks to backend to prevent creation of l2 and shared networks in nsx zones and filter only nsx offerings when creating isolated networks
* cleanup
* NSX: Fix code smells (#8436)
* NSX: Fix code smells
* Add changes to service creation logic
* CKS: Add action to during firewall rule creation (#8498)
* NSX,UI: Deduplicate network list when creating kubernetes clusters (#8513)
* NSX: Make LB service selectable in network offering (#8512)
* NSX: Make LB service selectable in network offering
* fix label
* address comments
* address comments
* NSX: Add appropriate error message when icmp type is set to -1 for NSX (#8504)
* NSX: Add appropriate error message when icmp type is set to -1 for NSX
* address comments
* update text
* fix test
* fix test - build failure
* fix test - build failure
* NSX: Cleanup NSX resources during k8s cluster cleanup (#8528)
* fix test failure
* NSX: Improve segment deletion process (#8538)
* NSX: Add passive monitor for NSX LB to test whether a server is available (#8533)
* NSX: Add passive monitor for NSX LB to test whether a server is available
* Add active monitors too
* fix build failure
* NSX: Add check for ICMP code / type for NSX zones (#8542)
* NSX: Fix Routed Mode for Isolated and VPC networks (#8534)
* NSX: Fix Routed Mode for Isolated and VPC networks
* NSX: Fix Routed mode - add checks for ports added for FW rules
* clean up code
* fix build failure
* NSX: Add retry logic with sleep to delete segments (#8554)
* NSX: Add retry logic with sleep to delete segments
* add logs
* NSX: Fix custom ACL check (#2)
* NSX: Fix custom ACL check
* NSX: Fix custom ACL check
* Nsx vpc routed mode (#5)
* NSX: Fix VPC routed mode
* NSX: VPC route mode
* remove unnecessary changes
* Nsx: Support internal LB (#4)
* NSX: Support internal LB service in NSX
* add lb removal logic
* Fix UI issue hiding internal LB tab
* Refactor method name
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* NSX: Improve NSX resource cleanup process (#3)
* Fix unit test
* NSX: Add SourceNAT service to the default Routed offering for VPC (#13)
* Fix VPC restart with cleanup (#12)
* NSX: Fix ACL rule removal on replacement and fix rule order (#11)
* NSX: fix smoke test failure for ACLs (#9)
* Fix unit tests
* Fix NSX plugin pom XML
* NSX: Add support to re-order ACL rules (NSX FW rules) (#14)
* [WIP] NSX: Add support to re-order ACL rules (NSX FW rules)
* fix reordering of acl rules on all networks that it is associated to
* clean up and attempt test fix
* Fix tests
* Remove unused import
* tweak reorder logic
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* Fix zone creation issue for internal load balancer
* Fix
* Fix unit test
* fix logger
* fix logger
* fix logger
* NSX: Fix VPC form to ignore source NAT IP when creating VPCs and fix label
* Move SQL changes to the newest schema file
* NSX: Last Fixes
* Fix build
---------
Co-authored-by: nvazquez <nicovazquez90@gmail.com>
* 4.18:
Storage plugin support to check if volume on datastore requires access for migration (#8655)
CKS: fix /opt/bin/deploy-cloudstack-secret in CKS control nodes (#8697)
* Update to 4.20.0
* Update to python3
* Upgrade to JRE 17
* Upgrade to Debian 12.4.0
* VR: upgrade to python3
for f in `find systemvm/ -name *.py`;do
if grep "print " $f >/dev/null;then
2to3-2.7 -w $f
else
2to3-2.7 -p -w $f
fi
done
* java: Use JRE17 in cloudstack packages and systemvmtemplate
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* Add --add-opens to JAVA_OPTS in systemd config
* Add --add-opens to JAVA_OPTS in systemd config for usage
* python3: fix "TypeError: a bytes-like object is required, not 'str'"
* python3: fix "ValueError: must have exactly one of create/read/write/append mode"
* Add --add-exports=java.base/sun.security.x509=ALL-UNNAMED for management server
* Use pip3 instead of pip for centos8
* python3: fix "TypeError: write() argument must be str, not bytes"
```
root@r-1037-VM:~# /opt/cloud/bin/passwd_server_ip.py 10.1.1.1
Traceback (most recent call last):
File "/opt/cloud/bin/passwd_server_ip.py", line 201, in <module>
serve()
File "/opt/cloud/bin/passwd_server_ip.py", line 187, in serve
initToken()
File "/opt/cloud/bin/passwd_server_ip.py", line 60, in initToken
f.write(secureToken)
TypeError: write() argument must be str, not bytes
root@r-1037-VM:~#
```
* Python3: fix "name 'file' is not defined"
```
root@r-1037-VM:~# /opt/cloud/bin/passwd_server_ip.py 10.1.1.1
Traceback (most recent call last):
File "/opt/cloud/bin/passwd_server_ip.py", line 201, in <module>
serve()
File "/opt/cloud/bin/passwd_server_ip.py", line 188, in serve
loadPasswordFile()
File "/opt/cloud/bin/passwd_server_ip.py", line 67, in loadPasswordFile
with file(getPasswordFile()) as f:
NameError: name 'file' is not defined
```
* python3: fix "TypeError: write() argument must be str, not bytes" (two more files)
* Upgrade jaxb version
* python3: fix more "TypeError: a bytes-like object is required, not str"
* python3: fix "Failed to update password server"
Failed to update password server due to: POST data should be bytes, an iterable of bytes, or a file object. It cannot be of type str.
* python3: fix "bad duration value: ikelifetime=24.0h"
Jan 15 13:57:20 systemvm ipsec[3080]: # bad duration value: ikelifetime=24.0h
* python3: fix password server "invalid save_password token"
* test: incease retries in test_vpc_vpn.py
* python3: fix passwd_server_ip.py
see error below
```
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: ----------------------------------------
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: Exception occurred during processing of request from ('10.1.1.129', 32782)
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: Traceback (most recent call last):
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: File "/usr/lib/python3.9/socketserver.py", line 650, in process_request_thread
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: self.finish_request(request, client_address)
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: File "/usr/lib/python3.9/socketserver.py", line 360, in finish_request
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: self.RequestHandlerClass(request, client_address, self)
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: File "/usr/lib/python3.9/socketserver.py", line 720, in __init__
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: self.handle()
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: File "/usr/lib/python3.9/http/server.py", line 427, in handle
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: self.handle_one_request()
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: File "/usr/lib/python3.9/http/server.py", line 415, in handle_one_request
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: method()
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: File "/opt/cloud/bin/passwd_server_ip.py", line 120, in do_GET
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: self.wfile.write(password)
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: File "/usr/lib/python3.9/socketserver.py", line 799, in write
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: self._sock.sendall(b)
Jan 15 18:51:21 systemvm passwd_server_ip.py[1507]: TypeError: a bytes-like object is required, not 'str'
```
* python3: fix self.cl.get_router_password in Redundant VRs
```
File "/opt/cloud/bin/cs/CsDatabag.py", line 154, in get_router_password
md5.update(passwd)
TypeError: Unicode-objects must be encoded before hashing"]
```
* scripts: mark multipath scripts as executable
* systemvm template: remove hyperv packages and do not export
* VR: update default RAM size of System VMs/VRs to 512MiB
Before
```
mysql> select id,name,cpu,speed,ram_size,unique_name,system_use from service_offering where name like "System%";
+----+----------------------------------------------------------+------+-------+----------+----------------------------------+------------+
| id | name | cpu | speed | ram_size | unique_name | system_use |
+----+----------------------------------------------------------+------+-------+----------+----------------------------------+------------+
| 3 | System Offering For Software Router | 1 | 500 | 256 | Cloud.Com-SoftwareRouter | 1 |
| 4 | System Offering For Software Router - Local Storage | 1 | 500 | 256 | Cloud.Com-SoftwareRouter-Local | 1 |
| 5 | System Offering For Internal LB VM | 1 | 256 | 256 | Cloud.Com-InternalLBVm | 1 |
| 6 | System Offering For Internal LB VM - Local Storage | 1 | 256 | 256 | Cloud.Com-InternalLBVm-Local | 1 |
| 7 | System Offering For Console Proxy | 1 | 500 | 1024 | Cloud.com-ConsoleProxy | 1 |
| 8 | System Offering For Console Proxy - Local Storage | 1 | 500 | 1024 | Cloud.com-ConsoleProxy-Local | 1 |
| 9 | System Offering For Secondary Storage VM | 1 | 500 | 512 | Cloud.com-SecondaryStorage | 1 |
| 10 | System Offering For Secondary Storage VM - Local Storage | 1 | 500 | 512 | Cloud.com-SecondaryStorage-Local | 1 |
| 11 | System Offering For Elastic LB VM | 1 | 128 | 128 | Cloud.Com-ElasticLBVm | 1 |
| 12 | System Offering For Elastic LB VM - Local Storage | 1 | 128 | 128 | Cloud.Com-ElasticLBVm-Local | 1 |
+----+----------------------------------------------------------+------+-------+----------+----------------------------------+------------+
10 rows in set (0.00 sec)
```
New value
```
mysql> select id,name,cpu,speed,ram_size,unique_name,system_use from service_offering where name like "System%";
+----+----------------------------------------------------------+------+-------+----------+----------------------------------+------------+
| id | name | cpu | speed | ram_size | unique_name | system_use |
+----+----------------------------------------------------------+------+-------+----------+----------------------------------+------------+
| 3 | System Offering For Software Router | 1 | 500 | 512 | Cloud.Com-SoftwareRouter | 1 |
| 4 | System Offering For Software Router - Local Storage | 1 | 500 | 512 | Cloud.Com-SoftwareRouter-Local | 1 |
| 5 | System Offering For Internal LB VM | 1 | 256 | 512 | Cloud.Com-InternalLBVm | 1 |
| 6 | System Offering For Internal LB VM - Local Storage | 1 | 256 | 512 | Cloud.Com-InternalLBVm-Local | 1 |
| 7 | System Offering For Console Proxy | 1 | 500 | 1024 | Cloud.com-ConsoleProxy | 1 |
| 8 | System Offering For Console Proxy - Local Storage | 1 | 500 | 1024 | Cloud.com-ConsoleProxy-Local | 1 |
| 9 | System Offering For Secondary Storage VM | 1 | 500 | 512 | Cloud.com-SecondaryStorage | 1 |
| 10 | System Offering For Secondary Storage VM - Local Storage | 1 | 500 | 512 | Cloud.com-SecondaryStorage-Local | 1 |
| 11 | System Offering For Elastic LB VM | 1 | 128 | 512 | Cloud.Com-ElasticLBVm | 1 |
| 12 | System Offering For Elastic LB VM - Local Storage | 1 | 128 | 512 | Cloud.Com-ElasticLBVm-Local | 1 |
+----+----------------------------------------------------------+------+-------+----------+----------------------------------+------------+
10 rows in set (0.01 sec)
```
* debian12: fix test_network_ipv6 and test_vpc_ipv6
* python3: remove duplicated imports
* debian12: failed to start Apache2 server (SSLCipherSuite @SECLEVEL=0)
error message
```
[Sat Jan 20 22:51:14.595143 2024] [ssl:emerg] [pid 10200:tid 140417063888768] AH02562: Failed to configure certificate cloudinternal.com:443:0 (with chain), check /etc/ssl/certs/cert_apache.crt
[Sat Jan 20 22:51:14.595234 2024] [ssl:emerg] [pid 10200:tid 140417063888768] SSL Library Error: error:0A00018E:SSL routines::ca md too weak
AH00016: Configuration Failed
```
openssl version
```
root@s-167-VM:~# openssl version -a
OpenSSL 3.0.11 19 Sep 2023 (Library: OpenSSL 3.0.11 19 Sep 2023)
built on: Mon Oct 23 17:52:22 2023 UTC
platform: debian-amd64
options: bn(64,64)
compiler: gcc -fPIC -pthread -m64 -Wa,--noexecstack -Wall -fzero-call-used-regs=used-gpr -DOPENSSL_TLS_SECURITY_LEVEL=2 -Wa,--noexecstack -g -O2 -ffile-prefix-map=/build/reproducible-path/openssl-3.0.11=. -fstack-protector-strong -Wformat -Werror=format-security -DOPENSSL_USE_NODELETE -DL_ENDIAN -DOPENSSL_PIC -DOPENSSL_BUILDING_OPENSSL -DNDEBUG -Wdate-time -D_FORTIFY_SOURCE=2
OPENSSLDIR: "/usr/lib/ssl"
ENGINESDIR: "/usr/lib/x86_64-linux-gnu/engines-3"
MODULESDIR: "/usr/lib/x86_64-linux-gnu/ossl-modules"
Seeding source: os-specific
CPUINFO: OPENSSL_ia32cap=0x80202001478bfffd:0x0
```
certificate
```
root@s-167-VM:~# keytool -printcert -rfc -file /usr/local/cloud/systemvm/certs/realhostip.crt
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
Warning:
The certificate uses the SHA1withRSA signature algorithm which is considered a security risk. This algorithm will be disabled in a future update.
```
it comes from
```
$ openssl x509 -in ./systemvm/agent/certs/realhostip.crt -noout -text
Certificate:
Data:
Version: 3 (0x2)
Serial Number: 11277268652730408 (0x28109db8152828)
Signature Algorithm: sha1WithRSAEncryption
Issuer: C = US, ST = Arizona, L = Scottsdale, O = "GoDaddy.com, Inc.", OU = http://certificates.godaddy.com/repository, CN = Go Daddy Secure Certification Authority, serialNumber = 07969287
Validity
Not Before: Feb 3 03:30:40 2012 GMT
Not After : Feb 7 05:11:23 2017 GMT
Subject: O = *.realhostip.com, OU = Domain Control Validated, CN = *.realhostip.com
```
* debian12: use ed25519 instead of rsa as ssh-rsa has been deprecated in OpenSSH
on xenserver
```
[root@pr8497-t8906-xenserver-71-xs2 ~]# ssh -i .ssh/id_rsa.cloud -p 3922 169.254.214.153
Warning: Permanently added '[169.254.214.153]:3922' (ECDSA) to the list of known hosts.
Permission denied (publickey).
```
in the CPVM
Jan 22 19:31:09 v-1-VM sshd[2869]: userauth_pubkey: signature algorithm ssh-rsa not in PubkeyAcceptedAlgorithms [preauth]
Jan 22 19:31:09 v-1-VM sshd[2869]: Connection closed by authenticating user root 169.254.0.1 port 54704 [preauth]
```
ssh-dss (DSA) is not supported either
* debian12: add PubkeyAcceptedAlgorithms=+ssh-rsa to sshd_config
* VR: install python3 packages in case of Debian 11
* pom.xml: exclude systemvm/agent/packages/* in license check
* systemvm: do not patch router/systemvm during startup
this will cause 4.19 SYSTEM template not work, but may be expected
- python3 VS python2 (default)
- openSSL 3.0.1 VS 1.1.1w
- openssh-server 9.1 VS 8.4
* VR: patch router/systemvm if template is debian11
This supports debian 11 template by
- revert change in systemvm/debian/etc/ssh/sshd_config
- patch VR/systemvms during startup
- install packages during patching system vm/routers
* python3 flake: fix E502 the backslash is redundant between brackets
```
../debian/root/health_checks/router_version_check.py:55:70: E502 the backslash is redundant between brackets
../debian/root/health_checks/router_version_check.py:58:61: E502 the backslash is redundant between brackets
../debian/root/health_checks/router_version_check.py:67:71: E502 the backslash is redundant between brackets
../debian/root/health_checks/router_version_check.py:70:60: E502 the backslash is redundant between brackets
../debian/root/health_checks/haproxy_check.py:47:71: E502 the backslash is redundant between brackets
../debian/root/health_checks/haproxy_check.py:48:64: E502 the backslash is redundant between brackets
../debian/root/health_checks/cpu_usage_check.py:43:54: E502 the backslash is redundant between brackets
../debian/root/health_checks/cpu_usage_check.py:46:58: E502 the backslash is redundant between brackets
../debian/root/health_checks/memory_usage_check.py:31:65: E502 the backslash is redundant between brackets
../debian/root/health_checks/memory_usage_check.py:42:57: E502 the backslash is redundant between brackets
../debian/root/health_checks/memory_usage_check.py:45:63: E502 the backslash is redundant between brackets
```
* python3 flake: fix E275 missing whitespace after keyword
```
../debian/opt/cloud/bin/cs_firewallrules.py:29:20: E275 missing whitespace after keyword
../debian/opt/cloud/bin/cs_dhcp.py:27:16: E275 missing whitespace after keyword
../debian/opt/cloud/bin/cs_dhcp.py:36:16: E275 missing whitespace after keyword
../debian/opt/cloud/bin/cs_guestnetwork.py:33:20: E275 missing whitespace after keyword
../debian/opt/cloud/bin/cs_guestnetwork.py:35:16: E275 missing whitespace after keyword
../debian/opt/cloud/bin/cs_vpnusers.py:37:16: E275 missing whitespace after keyword
../debian/opt/cloud/bin/merge.py:230:11: E275 missing whitespace after keyword
../debian/opt/cloud/bin/merge.py:239:19: E275 missing whitespace after keyword
../debian/opt/cloud/bin/cs_remoteaccessvpn.py:24:12: E275 missing whitespace after keyword
../debian/opt/cloud/bin/cs_site2sitevpn.py:24:12: E275 missing whitespace after keyword
../debian/opt/cloud/bin/cs/CsHelper.py:90:15: E275 missing whitespace after keyword
../debian/opt/cloud/bin/cs/CsAddress.py:367:15: E275 missing whitespace after keyword
```
* python3 flake: fix configure.py
```
../debian/opt/cloud/bin/configure.py:24:22: E401 multiple imports on one line
../debian/opt/cloud/bin/configure.py:43:180: E501 line too long (294 > 179 characters)
../debian/opt/cloud/bin/configure.py:46:1: E302 expected 2 blank lines, found 1
../debian/opt/cloud/bin/configure.py:63:1: E302 expected 2 blank lines, found 1
../debian/opt/cloud/bin/configure.py:65:12: E721 do not compare types, for exact checks use `is` / `is not`, for instance checks use `isinstance()`
../debian/opt/cloud/bin/configure.py:72:1: E302 expected 2 blank lines, found 1
../debian/opt/cloud/bin/configure.py:310:25: E711 comparison to None should be 'if cond is not None:'
../debian/opt/cloud/bin/configure.py:312:29: E711 comparison to None should be 'if cond is None:'
../debian/opt/cloud/bin/configure.py:378:25: E711 comparison to None should be 'if cond is not None:'
../debian/opt/cloud/bin/configure.py:380:29: E711 comparison to None should be 'if cond is None:'
../debian/opt/cloud/bin/configure.py:490:29: E712 comparison to False should be 'if cond is False:' or 'if not cond:'
../debian/opt/cloud/bin/configure.py:642:16: E721 do not compare types, for exact checks use `is` / `is not`, for instance checks use `isinstance()`
../debian/opt/cloud/bin/configure.py:644:18: E721 do not compare types, for exact checks use `is` / `is not`, for instance checks use `isinstance()`
../debian/opt/cloud/bin/configure.py:1416:1: E305 expected 2 blank lines after class or function definition, found 1
```
* python3 flake: fix other python files
```
../debian/opt/cloud/bin/vmdata.py:97:12: E721 do not compare types, for exact checks use `is` / `is not`, for instance checks use `isinstance()`
../debian/opt/cloud/bin/vmdata.py:99:14: E721 do not compare types, for exact checks use `is` / `is not`, for instance checks use `isinstance()`
../debian/opt/cloud/bin/cs/CsRedundant.py:438:53: E203 whitespace before ':'
../debian/opt/cloud/bin/cs/CsRedundant.py:461:53: E203 whitespace before ':'
../debian/opt/cloud/bin/cs/CsRedundant.py:499:5: E303 too many blank lines (2)
../debian/opt/cloud/bin/cs/CsDatabag.py:189:1: E302 expected 2 blank lines, found 1
../debian/opt/cloud/bin/cs/CsDatabag.py:193:37: E721 do not compare types, for exact checks use `is` / `is not`, for instance checks use `isinstance()`
../debian/opt/cloud/bin/cs/CsHelper.py:118:30: E231 missing whitespace after ','
../debian/opt/cloud/bin/cs/CsHelper.py:119:15: E225 missing whitespace around operator
../debian/opt/cloud/bin/cs/CsHelper.py:127:19: E225 missing whitespace around operator
../debian/opt/cloud/bin/cs/CsAddress.py:324:43: E221 multiple spaces before operator
../debian/opt/cloud/bin/cs/CsVpcGuestNetwork.py:28:1: E302 expected 2 blank lines, found 1
```
* python3 flake: fix CsNetfilter.py
```
../debian/opt/cloud/bin/cs/CsNetfilter.py:226:13: E117 over-indented
../debian/opt/cloud/bin/cs/CsNetfilter.py:233:180: E501 line too long (197 > 179 characters)
../debian/opt/cloud/bin/cs/CsNetfilter.py:241:14: E201 whitespace after '{'
../debian/opt/cloud/bin/cs/CsNetfilter.py:242:14: E201 whitespace after '{'
../debian/opt/cloud/bin/cs/CsNetfilter.py:247:18: E201 whitespace after '{'
../debian/opt/cloud/bin/cs/CsNetfilter.py:247:74: E202 whitespace before '}'
../debian/opt/cloud/bin/cs/CsNetfilter.py:248:18: E201 whitespace after '{'
```
* systemvm/test: fix sys.path
```
$ bash runtests.sh
/usr/bin/python
Python 3.10.12
Running pycodestyle to check systemvm/python code for errors
Running pylint to check systemvm/python code for errors
Python 3.10.12
pylint 2.12.2
astroid 2.9.3
Python 3.10.12 (main, Nov 20 2023, 15:14:05) [GCC 11.4.0]
--------------------------------------------------------------------
Your code has been rated at 10.00/10 (previous run: 10.00/10, +0.00)
--------------------------------------------------------------------
Your code has been rated at 10.00/10 (previous run: 10.00/10, +0.00)
Running systemvm/python unit tests
....Device "eth0" does not exist.
.....................
----------------------------------------------------------------------
Ran 25 tests in 0.008s
OK
```
* Revert "systemvm template: remove hyperv packages and do not export"
This reverts commit 4383d59d031bde6eae7ebba261ff641ca0a66cd5.
* debian12: move SQL change to schema-41900to42000.sql
* debian12: update systemvm template version to 4.20 in pom.xml
* pom.xml: fix NPE if templates do not exist on download.cloudstack.org
* debian12: increase default system offering for routers to 384MiB RAM
* CKS: fix addkubernetessupportedversion failed with JRE17
```
marvin.cloudstackException.CloudstackAPIException: Execute cmd: addkubernetessupportedversion failed, due to: errorCode: 530, errorText:Cannot invoke "org.apache.cloudstack.engine.subsystem.api.storage.ObjectInDataStoreStateMachine$State.toString()" because the return value of "com.cloud.api.query.vo.TemplateJoinVO.getState()" is null
```
* python3: revert changes by 2to3 with systemvm/debian/root/health_checks/*.py
* debian12: use ISO/packages on download.cloudstack.org
* VR: Update default ram size to 384
* debian12: fix router_version_check.py after VR live-patch and add health check in test_routers.py
* debian12: fix build error after log4j 2.x merge
* VR: Update default ram size to 512MB (again)
This reverts commit 578dd2b73f380e8231ae1eb59827230757cac5e8 and efafa8c4d63775653a2cd406fca10784fbcec3e3.
* systemvmtemplate: Upgrade to Debian 12.5.0
* systemvm template: increase swap to 512MB
* VR: fix health check error due to deprecated SafeConfigParser
warning below
```
root@r-20-VM:~# /opt/cloud/bin/getRouterMonitorResults.sh true
/root/monitorServices.py:59: DeprecationWarning: The SafeConfigParser class has been renamed to ConfigParser in Python 3.2. This alias will be removed in Python 3.12. Use ConfigParser directly instead.
parser = SafeConfigParser()
```
* test: fix wget does not work in macchinina vms on vmware80u1
fixes error below
```
{Cmd: wget -t 1 -T 1 www.google.com via Host: 10.0.55.186} {returns: ["wget: '/usr/lib/libpcre.so.1' is not an ELF file", "wget: can't load library 'libpcre.so.1'"]}
```
* packaging: add message for VR memory upgrade after packages installation
---------
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Co-authored-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Co-authored-by: Vishesh <vishesh92@gmail.com>
Feature spec: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Granular+Resource+Limit+Management
Introduces the concept of tagged resource limits for granular resource limit management. Limits can be enforced on accounts and domains for the deployment of entities for a tagged resource. Current tagged resource limits can be used for the following resource types,
Host limits
- user_vm
- cpu
- memory
Storage limits
- volume
- primary_storage
Following global settings can used to specify tags for which limit needs to be enforced,
Host: `resource.limit.host.tags`
Storage: `resource.limit.storage.tags`
Option for specifying tagged resource limits and viewing tagged resource usage are made available in the UI.
Enhances the use of templatetag for VM deployment and template creation
Adds option to list service/compute offerings that can be used with a given template. A new parameter named templateid has been added.
Adds option to list disk offering with suitability flag for a virtual machine. A new parameter named virtualmachineid has been added to the listDiskOfferings API which when passed returns suitableforvirtualmachine param in the response.
* Normalize logs
All classes that could have their loggers inherited from their fathers had their own loggers deleted;
Most loggers didn't have to be static, so most of them were normalized so that they wouldn't be;
All loggers are protected now;
Static logger's name are now 'LOGGER';
Non-static logger's name are now 'logger';
New class DbUpgradeAbstractImpl created so that all Upgraders extend it and inherit its logger
* Upgrade log4j
* fix errors caused by the merge
* Refactor cglibThrowableRenderer functionality to log4j2 and upgrade the last configuration files
* fix sonarcloud bug
* Fix errors caused by merge, remove some unused loggers, and rename a variable that was mistakenly renamed on the normalization commit
* Readd snmpTrapAppender, remove TestAppender
* Regenerate changes
* regenerate changes
* refactor last custom appender
* fix systemvm configuration xml
* Regenerate changes
* Regenerate changes
* regenerate changes
* Regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* Fix utils pom
* fix some tests
* regenerate changes
* Fix jar being printed on exception
* fix logging in system VMs, fix commands not having log4j2 classpath.
* regenerate changes
* Fix some unwanted renomeations
* fix end of file
* regenerate changes
* regenerate changes
* fix merge error
* regenerate changes
* fix tests
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* readd reload4j to tungsten as juniper depends on it
* Regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* re-add reload4j dependency to network-contrail, as juniper depends on it
* regenerate changes
* regenerate changes
* regenerate changes
* fix typo
* regenerate changes
* regenerate changes
* Fix end of files
* regenerate changes
* add logj42 to cloud-utils-SHADED.jar
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* regenerate changes
* Regenerate changes
* Regenerate changes
* Regenerate changes
* regenerate changes
* Regenerate changes
* regenerate changes
* Regenerate changes
* Regenerate changes
* Regenerate changes
* regenerate changes
* Regenerate changes
* Regenerate changes
* fix some tests
* Regenerate changes
* Regenerate changes
* fix test
* Regenerate changes
* Regenerate changes
* CKS: retry if unable to drain node or unable to upgrade k8s node
I tried CKS upgrade 16 times, 11 of 16 upgrades succeeded.
2 of 16 upgrades failed due to
```
error: unable to drain node "testcluster-of7974-node-18c8c33c2c3" due to error:[error when evicting pods/"cloud-controller-manager-5b8fc87665-5nwlh" -n "kube-system": Post "https://10.0.66.18:6443/api/v1/namespaces/kube-system/pods/cloud-controller-manager-5b8fc87665-5nwlh/eviction": unexpected EOF, error when evicting pods/"coredns-5d78c9869d-h5nkz" -n "kube-system": Post "https://10.0.66.18:6443/api/v1/namespaces/kube-system/pods/coredns-5d78c9869d-h5nkz/eviction": unexpected EOF], continuing command...
```
3 of 16 upgrades failed due to
```
Error from server: error when retrieving current configuration of:
Resource: "rbac.authorization.k8s.io/v1, Resource=roles", GroupVersionKind: "rbac.authorization.k8s.io/v1, Kind=Role"
Name: "kubernetes-dashboard", Namespace: "kubernetes-dashboard"
from server for: "/mnt/k8sdisk//dashboard.yaml": etcdserver: leader changed
```
* CKS: remove tests of creating/deleting HA clusters as they are covered by the upgrade test
* Update PR 8402 as suggested
* test: remove CKS cluster if fail to create or verify
