This fixes regression failures seen in Trillian, fixes NPEs that cause Travis related failures.
This also removes the aria2 dependency from rpms that require users to enable/install epel-release.
This finally updates the checksums for 4.11 systemvmtemplates in db upgrade path.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Allowed zone-wide primary storage based on a custom plug-in to be added via the GUI in a KVM-only environment (previously this only worked for XenServer and VMware)
Added support for root disks on managed storage with KVM
Added support for volume snapshots with managed storage on KVM
Enable creating a template directly from a volume (i.e. without having to go through a volume snapshot) on KVM with managed storage
Only allow the resizing of a volume for managed storage on KVM if the volume in question is either not attached to a VM or is attached to a VM in the Stopped state.
Included support for Reinstall VM on KVM with managed storage
Enabled offline migration on KVM from non-managed storage to managed storage and vice versa
Included support for online storage migration on KVM with managed storage (NFS and Ceph to managed storage)
Added support to download (extract) a managed-storage volume to a QCOW2 file
When uploading a file from outside of CloudStack to CloudStack, set the min and max IOPS, if applicable.
Included support for the KVM auto-convergence feature
The compression flag was actually added in version 1.0.3 (1000003) as opposed to version 1.3.0 (1003000) (changed this to reflect the correct version)
On KVM when using iSCSI-based managed storage, if the user shuts a VM down from the guest OS (as opposed to doing so from CloudStack), we need to pass to the KVM agent a list of applicable iSCSI volumes that need to be disconnected.
Added a new Global Setting: kvm.storage.live.migration.wait
For XenServer, added a check to enforce that only volumes from zone-wide managed storage can be storage motioned from a host in one cluster to a host in another cluster (cannot do so at the time being with volumes from cluster-scoped managed storage)
Don’t allow Storage XenMotion on a VM that has any managed-storage volume with one or more snapshots.
Enabled for managed storage with VMware: Template caching, create snapshot, delete snapshot, create volume from snapshot, and create template from snapshot
Added an SIOC API plug-in to support VMware SIOC
When starting a VM that uses managed storage in a cluster other than the one it last was running in, we need to remove the reference to the iSCSI volume from the original cluster.
Added the ability to revert a volume to a snapshot
Enabled cluster-scoped managed storage
Added support for VMware dynamic discovery
Extending Config Drive support
* Added support for VMware
* Build configdrive.iso on ssvm
* Added support for VPC and Isolated Networks
* Moved implementation to new Service Provider
* UI fix: add support for urlencoded userdata
* Add support for building systemvm behind a proxy
Co-Authored-By: Raf Smeets <raf.smeets@nuagenetworks.net>
Co-Authored-By: Frank Maximus <frank.maximus@nuagenetworks.net>
Co-Authored-By: Sigert Goeminne <sigert.goeminne@nuagenetworks.net>
CloudStack volumes and templates are one single virtual disk in case of XenServer/XCP and KVM hypervisors since the files used for templates and volumes are virtual disks (VHD, QCOW2). However, VMware volumes and templates are in OVA format, which are archives that can contain a complete VM including multiple VMDKs and other files such as ISOs. And currently, Cloudstack only supports Template creation based on OVA files containing a single disk. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, only the first disk is attached to the new instance and other disks are ignored.
Similarly with uploaded volumes, attaching an uploaded volume that contains multiple disks to a VM will result in only one VMDK to being attached to the VM.
FS: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Support+OVA+files+containing+multiple+disks
This behavior needs to be improved in VMWare to support OVA files with multiple disks for both uploaded volumes and templates. i.e. If a user creates a template from a OVA file containing more than 1 disk and launches an instance using this template, the first disk should be attached to the new instance as the ROOT disk and volumes should be created based on other VMDK disks in the OVA file and should be attached to the instance.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows using templates and ISOs avoiding secondary storage as intermediate cache on KVM. The virtual machine deployment process is enhanced to supported bypassed registered templates and ISOs, delegating the work of downloading them to primary storage to the KVM agent instead of the SSVM agent.
Template and ISO registration:
- When hypervisor is KVM, a checkbox is displayed with 'Direct Download' label.
- API methods registerTemplate and registerISO are both extended with this new parameter directdownload.
- On template or ISO registration, no download job is sent to SSVM agent, CloudStack would only persist an entry on template_store_ref indicating that template or ISO has been marked as 'Direct Download' (bypassing Secondary Storage). These entries are persisted as:
template_id = Template or ISO id on vm_template table
store_id NULL
download_state = BYPASSED
state = Ready
(Note: these entries allow users to deploy virtual machine from registered templates or ISOs)
- An URL validation command is sent to a random KVM host to check if template/ISO location can be reached. Metalink are also supported by this feature. In case of a metalink, it is fetched and URL check is performed on each of its URLs.
- Checksum should be provided as indicated on #2246: {ALGORITHM}CHKSUMHASH
- After template or ISO is registered, it would be displayed in the UI
Virtual machine deployment:
When a 'Direct Download' template is selected for deployment, CloudStack would delegate template downloading to destination storage pool via destination host by a new pluggable download manager.
Download manager would handle template downloading depending on URL protocol. In case of HTTP, request headers can be set by the user via vm_template_details. Those details should be persisted as:
Key: HTTP_HEADER
Value: HEADERNAME:HEADERVALUE
In case of HTTPS, a new API method is added uploadTemplateDirectDownloadCertificate to allow user importing a client certificate into all KVM hosts' keystore before deployment.
After template or ISO is downloaded to primary storage, usual entry would be persisted on template_spool_ref indicating the mapping between template/ISO and storage pool.
This feature allow admins to dedicate a range of public IP addresses to the SSVM and CPVM, such that they can be subject to specific external firewall rules. The option to dedicate a public IP range to the System VMs (SSVM & CPVM) is added to the createVlanIpRange API method and the UI.
Solution:
Global setting 'system.vm.public.ip.reservation.mode.strictness' is added to determine if the use of the system VM reservation is strict (when true) or preferred (false), false by default.
When a range has been dedicated to System VMs, CloudStack should apply IPs from that range to
the public interfaces of the CPVM and the SSVM depending on global setting's value:
If the global setting is set to false: then CloudStack will use any unused and unreserved public IP
addresses for system VMs only when the pool of reserved IPs has been exhausted
If the global setting is set to true: then CloudStack will fail to deploy the system VM when the pool
of reserved IPs has been exhausted, citing the lack of available IPs.
UI Changes
Under Infrastructure -> Zone -> Physical Network -> Public -> IP Ranges, button 'Account' label is refactored to 'Set reservation'.
When that button is clicked, dialog displayed is also refactored, including a new checkbox 'System VMs' which indicates if range should be dedicated for CPVM and SSVM, and a note indicating its usage.
When clicking on button for any created range, UI dialog displayed indicates whether IP range is dedicated for system vms or not.
This extends work presented on #2048 on which the ability to extend the management range is provided.
Aim
This PR allows separating the management network subnet on which SSVM and CPVM are from the virtual routers management subnet.
Detailed use case
PCI compliance requires that network elements are defined as ‘in scope’ or ‘out of scope’, for compliance purposes. The SSVM and CPVM are both in scope as they allow public HTTP or HTTPS connections. The virtual routers have been defined as out of scope as they have been placed entirely in a firewalled network's segment. However, all of the system VM types share management network. As SSVM and CPVM are both in scope this would bring the virtual routers into scope as well, requiring individual audits of every virtual router. As this is not practical, the ‘management network’ which the SSVM and CPVM are on, and the management network which the virtual routers are on, must be separated by a firewall.
Description
By this feature it is possible to dedicate a created range for SSVM and CPVM (system vms) and provide a VLAN ID for its range.
A new boolean global configuration is added: system.vm.management.ip.reservation.mode.strictness. If enabled, the use of System VMs management IP reservation is strict, preferred if not. Default value is false (preferred).
Strict reservation: System VMs should try to get a private IP from a range marked for system vms. If not available, deployment fails
Preferred reservation: System VMS will try to get a private IP from a range marked for system vms. If not available, IP for range not marked for system vms is taken.
Consider this scenario:
1. User launches a VM from Template and keep it running
2. Admin logins and deleted that template [CloudPlatform does not check existing / running VM etc. while the deletion is done]
3. User resets the VM
4. CloudPlatform fails to star the VM as it cannot find the corresponding template.
It throws error as
java.lang.RuntimeException: Job failed due to exception Resource [Host:11] is unreachable: Host 11: Unable to start instance due to can't find ready template: 209 for data center 1
at com.cloud.vm.VmWorkJobDispatcher.runJob(VmWorkJobDispatcher.java:113)
at org.apache.cloudstack.framework.jobs.impl.AsyncJobManagerImpl$5.runInContext(AsyncJobManagerImpl.java:495)
Client is requesting better handing of this scenario. We need to check existing / running VM's when the template is deleted and warn admin about the possible issue that may occur.
REPRO STEPS
==================
1. Launches a VM from Template and keep it running
2. Now delete that template
3. Reset the VM
4. CloudPlatform fails to star the VM as it cannot find the corresponding template.
EXPECTED BEHAVIOR
==================
Cloud platform should throw some warning message while the template is deleted if that template is being used by existing / running VM's
ACTUAL BEHAVIOR
==================
Cloud platform does not throw as waring etc.
This fixes test failures around VMware with the new systemvmtemplate.
In addition:
- Does not skip rVR related test cases for VMware
- Removes rc.local
- Processes unprocessed cmd_line.json
- Fixed NPEs around VMware tests/code
- On VMware, use udevadm to reconfigure nic/mac address than rebooting
- Fix proper acpi shutdown script for faster systemvm shutdowns
- Give at least 256MB of swap for VRs to avoid OOM on VMware
- Fixes smoke tests for environment related failures
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Several systemvmtemplate optimizations
- Uses new macchinina template for running smoke tests
- Switch to latest Debian 9.3.0 release for systemvmtemplate
- Introduce a new `get_test_template` that uses tiny test template
such as macchinina as defined test_data.py
- rVR related fixes and improvements
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
- Fixes timezone issue where dates show up as nvalid in UI
- Introduces new event timeline listing/filtering of events
- Several UI improvements to add columns in list views
- Bulk operations support in instance list view to shutdown and destroy
multiple-selected VMs (limitation: after operation, redundant entries
may show up in the list view, refreshing VM list view fixes that)
- Align table thead/tbody to avoid splitting of tables
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows CloudStack administrators to create layer 2 networks on CloudStack. As these networks are purely layer 2, they don't require IP addresses or Virtual Router, only VLAN is necessary (provided by administrator or assigned by CloudStack). Also, network services should be handled externally, e.g. DNS, DHCP, as they are not provided by L2 networks.
As a consequence, a new Guest Network type is created within CloudStack: L2
Description:
Network offerings and networks support new guest type: L2.
L2 Network offering creation allows administrator to select Specify VLAN or let CloudStack assign it dynamically.
L2 Network creation allows administrator to specify VLAN tag (if network offerings allows it) or simply create network.
VM deployments on L2 networks:
VMs should not IP addresses or any network service
No Virtual Router deployed on network
If Specify VLAN = true for network offering, network gets implemented using a dynamically assigned VLAN
UI changes
A new button is added on Networks tab, available for admins, to allow L2 networks creation
At present, The management IP range can only be expanded under the same subnet. According to existing range, either the last IP can be forward extended or the first IP can be backward extended. But we cannot add an entirely different range from the same subnet. So the expansion of range is subnet bound, which is fixed. But when the range gets exhausted and a user wants to deploy more system VMs, then the operation would fail. The purpose of this feature is to expand the range of management network IPs within the existing subnet. It can also delete and list the IP ranges.
Please refer the FS here: https://cwiki.apache.org/confluence/display/CLOUDSTACK/Expansion+of+Management+IP+Range
This change adds allocatediops to the ListStoragePool API. This applies to managed storage where we have a guaranteed minimum IOPS set. This is useful for monitoring if we have reached the IOPS limit on a storage cluster.
The listNuageVspDomainTemplat cmd was called by the ui when the create vpc dialog was opened. This command failed when no nuage vsp device was present. As a consequence the ui did not show the dialog. So currently it's not possible to create a vpc through the UI with a native CloudStack deployment. This bugfix, adds robustness to the ui that in case the cmd fails the dialog will appear nonetheless . Furthermore I also changed the listNuageVspDomainTemplateCmd to always return an empty result when there is no nuage zone.
This shows the owner account and network of a VR in the VR list view,
and for VPCs shows the VPC name and redundant state of the VPC rVR.
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
Supports following viewing and navigation/filtering:
- Networks -> view instances (instances that have nics on this network)
- Infra-> VRs -> view instances (attached to the VR's guest network id),
view owner account (if not system, or project), view instances
- Infra -> VRs -> list of VPC redundant VRs will have redundant state in
parenthesis in the list
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
* CLOUDSTACK-9972: Enhance listVolume API to include physical size and utilization.
Also fixed pool, cluster and pod info
* CLOUDSTACK-9972: Fix volume_view and duplicate API constant
* CLOUDSTACK-9972: Backport Do not allow vms to be deployed on hosts that are in disabled pod
* CLOUDSTACK-9972: Fix localization missing keys
* CLOUDSTACK-9972: Fix sql path
Allow security policies to apply on port groups:
- Accepts security policies while creating network offering
- Deployed network will have security policies from the network offering
applied on the port group (in vmware environment)
- Global settings as fallback when security policies are not defined for a network
offering
- Default promiscuous mode security policy set to REJECT as it's the default
for standard/default vswitch
Portgroup vlan-trunking options for dvswitch: This allows admins to define
a network with comma separated vlan id and vlan
range such as vlan://200-400,21,30-50 and use the provided vlan range to
configure vlan-trunking for a portgroup in dvswitch based environment.
VLAN overlap checks are performed for:
- isolated network against existing shared and isolated networks
- dedicated vlan ranges for the physical/public network for the zone
- shared network against existing isolated network
Allow shared networks to bypass vlan overlap checks: This allows admins
to create shared networks with a `bypassvlanoverlapcheck` API flag
which when set to 'true' will create a shared network without
performing vlan overlap checks against isolated network and against
the vlans allocated to the datacenter's physical network (vlan ranges).
Notes:
- No vlan-range overlap checks are performed when creating shared networks
- Multiple vlan id/ranges should include the vlan:// scheme prefix
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This commit is related to the Saml2 user authentication plugin.
The user can list its domains. His/Her domains are presented as the
following example:
username/subdomainA
username/subdomainB
However, if a user has two subdomains of the same name Dom1/subdomainA
and Dom2/subdomainA, the list is presented as follows:
username/subdomainA
username/subdomainA
With this commit it shows the full domain name to avoid such cases.
Thus, the domains will be presented as follows:
username/Dom1/subdomainA
username/Dom2/subdomainA
Root Cause:
The API returns the percentage value as floating point number but In UI it is converted to floor value of that number.
Hence for values less than 1%, the value is being converted to 0% and it doesn't show the value in the UI.
Solution:
Removed the conversion, now it represents as it is(Floating point value).
Host-HA offers investigation, fencing and recovery mechanisms for host that for
any reason are malfunctioning. It uses Activity and Health checks to determine
current host state based on which it may degrade a host or try to recover it. On
failing to recover it, it may try to fence the host.
The core feature is implemented in a hypervisor agnostic way, with two separate
implementations of the driver/provider for Simulator and KVM hypervisors. The
framework also allows for implementation of other hypervisor specific provider
implementation in future.
The Host-HA provider implementation for KVM hypervisor uses the out-of-band
management sub-system to issue IPMI calls to reset (recover) or poweroff (fence)
a host.
The Host-HA provider implementation for Simulator provides a means of testing
and validating the core framework implementation.
Signed-off-by: Abhinandan Prateek <abhinandan.prateek@shapeblue.com>
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This introduces a new certificate authority framework that allows
pluggable CA provider implementations to handle certificate operations
around issuance, revocation and propagation. The framework injects
itself to `NioServer` to handle agent connections securely. The
framework adds assumptions in `NioClient` that a keystore if available
with known name `cloud.jks` will be used for SSL negotiations and
handshake.
This includes a default 'root' CA provider plugin which creates its own
self-signed root certificate authority on first run and uses it for
issuance and provisioning of certificate to CloudStack agents such as
the KVM, CPVM and SSVM agents and also for the management server for
peer clustering.
Additional changes and notes:
- Comma separate list of management server IPs can be set to the 'host'
global setting. Newly provisioned agents (KVM/CPVM/SSVM etc) will get
radomized comma separated list to which they will attempt connection
or reconnection in provided order. This removes need of a TCP LB on
port 8250 (default) of the management server(s).
- All fresh deployment will enforce two-way SSL authentication where
connecting agents will be required to present certificates issued
by the 'root' CA plugin.
- Existing environment on upgrade will continue to use one-way SSL
authentication and connecting agents will not be required to present
certificates.
- A script `keystore-setup` is responsible for initial keystore setup
and CSR generation on the agent/hosts.
- A script `keystore-cert-import` is responsible for import provided
certificate payload to the java keystore file.
- Agent security (keystore, certificates etc) are setup initially using
SSH, and later provisioning is handled via an existing agent connection
using command-answers. The supported clients and agents are limited to
CPVM, SSVM, and KVM agents, and clustered management server (peering).
- Certificate revocation does not revoke an existing agent-mgmt server
connection, however rejects a revoked certificate used during SSL
handshake.
- Older `cloudstackmanagement.keystore` is deprecated and will no longer
be used by mgmt server(s) for SSL negotiations and handshake. New
keystores will be named `cloud.jks`, any additional SSL certificates
should not be imported in it for use with tomcat etc. The `cloud.jks`
keystore is stricly used for agent-server communications.
- Management server keystore are validated and renewed on start up only,
the validity of them are same as the CA certificates.
New APIs:
- listCaProviders: lists all available CA provider plugins
- listCaCertificate: lists the CA certificate(s)
- issueCertificate: issues X509 client certificate with/without a CSR
- provisionCertificate: provisions certificate to a host
- revokeCertificate: revokes a client certificate using its serial
Global settings for the CA framework:
- ca.framework.provider.plugin: The configured CA provider plugin
- ca.framework.cert.keysize: The key size for certificate generation
- ca.framework.cert.signature.algorithm: The certificate signature algorithm
- ca.framework.cert.validity.period: Certificate validity in days
- ca.framework.cert.automatic.renewal: Certificate auto-renewal setting
- ca.framework.background.task.delay: CA background task delay/interval
- ca.framework.cert.expiry.alert.period: Days to check and alert expiring certificates
Global settings for the default 'root' CA provider:
- ca.plugin.root.private.key: (hidden/encrypted) CA private key
- ca.plugin.root.public.key: (hidden/encrypted) CA public key
- ca.plugin.root.ca.certificate: (hidden/encrypted) CA certificate
- ca.plugin.root.issuer.dn: The CA issue distinguished name
- ca.plugin.root.auth.strictness: Are clients required to present certificates
- ca.plugin.root.allow.expired.cert: Are clients with expired certificates allowed
UI changes:
- Button to download/save the CA certificates.
Misc changes:
- Upgrades bountycastle version and uses newer classes
- Refactors SAMLUtil to use new CertUtils
Signed-off-by: Rohit Yadav <rohit.yadav@shapeblue.com>
This feature allows changing permission for existing role permissions, as those were static and could not be changed once created. It also provides the ability to change these permissions in the UI using a drop down menu for each permission rule, in which admin can select ‘Allow’ or ‘Deny’ permission.
Changes in the API:
This feature modifies behaviour of updateRolePermission API method:
New optional parameters ‘ruleid’ and ‘permission’ are introduced, they are mutual exclusive to ‘ruleorder’ parameter. This defines two use cases:
Update role permission: ‘ruleid’ and ‘permission’ parameters needed
Update rules order: ‘ruleorder’ parameter needed
Parameter ‘ruleorder’ is now optional
updateRolePermission providing ‘ruleorder’ parameter should be sent via POST
A simple if-statement would fail if either the type or code were 0
as that if-statement failed them.
By checking if they are defined and casting them to a String afterwards
this makes the if-statement properly resolve and show the rule as it should.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The current VPN users are added in the VPN tab inside the public IP after the VPN is enabled. For each network(for which VPN is supported and enabled), the VPN users are shared. As the Cloudstack doc says “ The account owner can create and manage users for their VPN. CloudStack does not use its account database for this purpose but uses a separate table. The VPN user database is shared across all the VPNs created by the account owner. All VPN users get access to all VPNs created by the account owner.”
The current implementation of going inside each network and adding VPN users give the first feel as if the users are network based. To fix this, Shifted the VPN users to networks tab view.
